How do I install Windows with my OEM disc?

So I bought the Windows 8.1 64-bit OEM installation disc, and was using BCA (Boot Camp Assistant) to install it on my Late 2012 Mac mini.
I did as I was prompted: plugged in an 8GB USB drive, inserted my disc into my external reader, opened BCA, checked the the all the boxes as per recommended than clicked Continue.
I was than brought to the part where I had to 'choose the ISO file'. I thought it would have automatically detected my disc, but since that wasn't the case, I proceeded to browse my disc to search for the ISO file. And there was none.
I even thought that using the OEM disc to install Windows using BCA was wrong, but it is actually recommended over the Retail one.
Can anyone help me in this?
PS: Please forgive my bad English.

You will need to convert the DVD to an ISO using Disk Utility. Please see Disk Utility 12.x: Create a disk image and Section Create a disk image from a disk or folder
From Boot Camp: System requirements for Microsoft Windows operating systems
An authentic Microsoft Windows full install disc or ISO file
You may not be able to use an OEM disk.

Similar Messages

How do I install Windows XP Pro OEM?

I have installed a legitimate copy of Windows XP Pro OEM I purchased from Ebay. (when i bought it i didnt know there was a difference i thought one was just mass produced and the other was retail pretty produced.)
So now windows xp is popping up with 'non-genuine' spam that it does and wont do any updates.
An IT friend of mine told me I could call Microsoft for registration and Activation and tell them that I changed the hardware, i havnt tried this yet.
My only reason for install xp is to play my old xp games, which by the way, are running really poorly and choppy (Simcity 4 Deluxe), but im guessing its because Windows isnt updated. Anyone else experience poor performance for games running in XP?
Any suggestions?

Spam is email. Using OEM isn't spam.
OEM or System Builder are totally fine and activate, the fact that it won't tells or suggests to me that your ebay skirted and is selling something else.
Buy from Newegg or Amazon. Or find a legit seller. The seller might spam you though and get into a less than polite discourse for leaving some helpful accurate feedback that they sold something that was not legit - but give them a chance I guess to prove they are going to stand behind it.
OEM copies can't be transferred to a new motherboard, sorry. That too is a good reason to buy retail. OEM can be installed multiple times, to the same motherboard only.

How to re-install Windows with no original CD

Hi all
Sorry if this is a silly question but when I've bought a new laptop in the past with Windows installed on it, it came with a Windows installation disk which I used to re-install Windows if I needed to. My new Yoga 2 Pro didn't come with a Windows 8.1 disk. What would I do if I needed to re-install Windows please?
Many thanks

Since this is more related to the OEM hardware setup I'd ask them here.
http://forums.toshiba.com/
For general windows related issues you can ask here.
http://answers.microsoft.com/en-us/windows
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How do i install windows 7 without a disc

I've purchased Windows 7. I'd like to run it on my MacBook Air, it is a mid 2013 13" running 8 Gig of RAM. As one would know I don't have an optical drive to read the disc that came with the package. I was told by an apple store rep that discs aren't used anymore and that it would be downloaded with the serial number (or something like that) through the web. Please help...

You can create a disk image of the Win install program. Its rather simple. You can also install the DROP DMG program on mac, and create a disk image (dmg) of the Win7 OS DVD and copy that onto a flash drive if you arent inclined to buy an external DVD player

HT3986 Installing Windows 7 from Upgrade disc

I have a Windows 7 Upgrade disc, can I use it to install Windows? Apple documentation says you can and then later says you can't. Is there a way to install Windows with an Upgrade disc or not? If so, how?

Yes, I guess that's what I was deducing. So if I'm coming from Windows and had previously purchased an upgrade disc, the only way to get Windows on the Mac would be to buy the full Windows OS. Or I'd need to buy the full version of XP or Vista in order to use my upgrade disc...meh.

How can I install Windows 8.1 Enterprise on my Macbook Pro With BootCamp?

How Can I Install Windows 8.1 Enterprise on my MacBook Pro?

Hi Armin.S,
I apologize, I'm a bit unclear on the exact nature of your question. If you are asking about the system requirements for running various versions of Windows under Bootcamp, or just more generally how to set up Bootcamp on your Mac, you may find the following articles/pages helpful:
Boot Camp: System requirements for Microsoft Windows operating systems
http://support.apple.com/kb/HT5634
Mac Basics: Using Windows on your Mac with Boot Camp
http://support.apple.com/kb/HT1461
Apple - Boot Camp Support
https://www.apple.com/support/bootcamp/
Regards,
- Brenden

How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.

How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.
I have Boot Camp 5.1.2 (497) and there is no option for installing using USB. I have downloaded an image of Windows 8.1 already.
I can't install using DVD R/W because it's not working.
Please help me.
Thank you.

unlocked by myself
thanks

How do you install Windows 7 on Macbook Air with a Windows 7 ISO image?

Macbook Airs have no optical drives, and I can't buy one. I do, however, have the Windows 7 ISO image. And I also have access to a Windows 7 PC. I found an article on CNET on installing from a Flash Drive, but that requires the CD. I also have a hard drive (120GB) and Flash USB (4GB), if they could help. Please help me as many programs I am familiar with are only windows-based. I am tried using open-source software like Wineskin Winery and WineBottler, but to no avail, I always end up confused with them.Please help me.

Acius wrote:
Crjohnson, I think you can really help me!
Okay, how do you use Wine? I don't want to install lots of software like MacPorts, just want the minimal software. So there are many things like Wine, WineBottler, and Wineskin Winery. What do I use for what? For example, I want to turn a windows game (Age of Empires 2 for example) into a full Mac App. How would I go about this?
I tried researching but it is so in-depth with terminal commands and all(i dont want to risk ruining my computer)
What is crossover? Is it another wine app?
Oh, and I tried Winery Wineskin...why doesn't it work? It keeps installing random things like Gecko, or Mono, but in the end, it doesn't work. Do I need the windows app's executable, or the window's apps's installation executable??
What are engines, and how many do I need to create? I think the best thing for me is to learn wine, because installing windows with bootcamp isn't worth the effort, I think, with me having only a few apps i need to run.
As for learning mac apps only, well, Windows apps dominate the market with most of applications being made for windows, especially games, with 90% market. So for some apps, there just isn't a mac version available, or if there is, it's costly. (Which you already know I can't buy things)
You probably cannot afford to buy Crossover either. It is designed for user friendliness though, but of course Wine cannot run everything.
Yes you have to learn some things to use Wineskin. Normally on Gecko and Mono prompt, just cancel them. Gecko is needed if you have a program using mshtml (its basically a replacement for Internet Explorer for programs that use parts of it). Mono is a replacement for .NET if your program requires that. You do not want to install them if you don't need them as they will just waste space. You can always refresh the wrapper later on and get the same prompts if you find out you need them later.
You can copy the full installed version of a game inside the Wineskin wrapper and try to set it up that way, but its usually easier to just run the installer and install it inside the wrapper just like you'd install it in Windows.
An Engine is something you download... its basically a specific Wine build made for a Wineskin wrapper.
If you do not want to learn Wineskin enough to get in and port your programs yourself, you can often find other people who have done so (at least with games).
Check out sites like PaulTheTall.com who has tons of Wineskin wrappers already made and ready to go for many games... you just download the wrapper, install the game you want in it using the normal Installer, then its ready to go. Many you'll need to manually update yourself to Wineskin 2.5.8 though since all the older versions broke ok the OS X 10.8.2 and 10.7.5 update, and Paul hasn't gotten to all of them yet since he has hundreds (including AoE 2 i think).
There is also Portingteam.com which has tons of pre-made wrappers for games (Including Cider hacks from official games).
If your talking about non-Game apps though, you can normally find an alternative... many of which are free.

How do I install itunes with Windows 7?

how do I install itunes with Windows 7? I always get a Windows Installer error or administrator error __

Have tried: download but do not install iTunes, then turn off virus protection and firewall, restart computer, login as admin, then run the iTunes insallation. After it installs, restart virus protection and firewall and logout and back in as standard user.
Windows leaves installers running or still resident which conflict with the iTunes installer.

How do I install Windows XP with boot camp assistant, on my IMac?

How do I install Windows XP with boot camp assistant, on my IMac?

Lion cannot BootCamp XP.
You can install XP under virtual machine software (Parallels, VM Fusion, VirtualBox).
And Windows 7 Pro has XP mode. XP will requires probably days of pathing after install and will be completely unsupported by MS within 1 year, but Windows 7 Pro still has great support from MS.

How can I install windows XP with Boot Camp 4.0.4 in Mac OS X 10.7.5?

How can I install windows XP with Boot Camp 4.0.4 in Mac OS X 10.7.5?

You can't. Only Windows 7 is supported in that configuration.

I download autocad 2010 with crack, how can i install it with crack coz i can't find where to paste the crack file? not like windows just go to drive c, progarms and click the installed folder and you can copy and paste the crack file.

i download autocad 2010 with crack, how can i install it with crack coz i can't find where to paste the crack file? not like windows just go to drive c, progarms and click the installed folder and you can copy and paste the crack file.
please help me..
thanks

No one here will help you.
You should definitely ask your question in this forum:
http://forums.autodesk.com/t5/AutoCAD-2010/bd-p/360

How to Install Windows 7 Without the Disc

1a) Here is very useful article from PCWorld.com. The article is entitled "How to Install Windows 7 Without the Disc" and means just what it says. The article also has links to Magical Jelly Bean Keyfinder and legitimate Windows 7 ISOs from Digital River, a licensed distributor of Microsoft software. The article lists "Step 1" as;
"Find your Windows 7 product key: Typically this 25-character alphanumeric string is printed on a sticker affixed to your PC or on documentation included with your PC. Alternatively, you can use a keyfinder program such as Magical Jelly Bean Keyfinder to pull your product key from the Registry. You need your product key to reinstall Windows."
1b) Using a key finder, however, is only useful if the Windows 7 product key was printed on a sticker (Microsoft Certificate of Authenticity) affixed to your PC, on documentation included with your PC, or sent via email by Microsoft. Assuming your computer came from one of the big brand computer manufacturers... HP, Sony, Dell, Gateway, etc... as most do, it uses a generic "mass activation" OEM SLP key. Trying to use this key by itself isn't going to work. This OEM SLP key needs to be mated with an OEM SLP certificate and an appropriate OEM BIOS with a proper SLIC table.
1c) Here is where ABR Beta With Windows 7 Support comes to the rescue. Follow the "How to use it" section of ABR for Windows Vista for information and instructions on how to use ABR. The steps listed for Vista apply to Windows 7 as well. Perform the "activation backup" to "backup" and save the OEM SLP key and OEM SLP certificate. Save the entire ABR folder to an external location for later use. This will allow you to pre-activate your "clean" Windows 7 install on the computer you pulled the key and certificate from.
1d) Now install Windows 7 from your new "Windows 7" disc or USB stick, following all prompts as needed. Don't enter a Windows 7 product key if request. Also, don't allow Windows to try to auto-activate. Once Windows is fully installed, run ABR "activation restore" to "restore" the previously backed up product key and certificate to the new Windows 7 install. Verify that Windows is activated, repeat "activation restore" if needed.
2) Here is another useful article, this time from SevenForums.com. This arcticle is entitled "Clean Reinstall - Factory OEM Windows 7" and provides detailed steps required to backup your computer, audit current hardware and software, locate software and drivers, install and activate Windows 7, and create a Windows 7 Backup Image of your fresh install.
Good luck.
Links to additional Windows 7 SP1 "Editions" and "Languages" can be found HERE and HERE.
Link to "ei.cfg Removal Utility". The "ei.cfg Removal Utility" is a simple tool that will remove the ei.cfg from any Windows ISO disc image, thereby converting the image into a "universal disc" that will prompt the user to select an edition during setup instead of being forced to use different discs for different versions of Windows 7.
Direct link to Windows 7 USB/DVD Download tool.
<Cross posted to Notebook Operating Systems and Software for Notebook, Laptop, and Netbook users>
EDITED by Frank on 8/28/2013
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

ervis,
Before formatting the hard drive you should have been able to use the HP Recovery Manager to create your recovery discs or perform a system recovery. This is provided the recovery partition wasn't already corrupt or damaged. If the "D:" HP Recovery partition is missing or damaged and you don't have a set of HP Recovery Discs, you will need to use the information in my previous post to get your computer up and running again.
The information in the document referred you to applies to several different "types" of installations;
Using ABRbeta is only needed if you have an active OEM factory SLP (system locked preactivated) installation of Windows. You use ABR to pull the factory key and certificate off the computer, to reuse it on the same computer with a clean Windows install.
If you are just installing Windows and are going to use the Windows 7 product key on the COA on the side of your computer, all you need to do is download the same version of Windows that your key is for and burn the ISO. Now install Windows answering or following all prompts as needed (except do not enter the Windows product at this time... it will be entered later). Once Windows has completely installed, enter the key and activate it. Your Windows 7 OA key should work on a SP1 install without issue.
The only thing I see that could mess things up, is the language of the install. If you are still having trouble activating Windows, please reference the ISO you download and a post a photo of your Windows COA
with the key erased or Xed out.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How do I install windows from USB on Macbook pro 3,1

How do I install windows from USB on Macbook pro 3,1 ?
My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
- My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
After rEFIt I booted and then I got this error:
Starting bootmgr.efi
Error: Unsupported while loading bootmgr.efi
I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
Point: Nothing is wrong with the windows software, and windows runs fine.
I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
rEFIt - Booting Legacy OS
Starting legacy loader
Using load option ´USB´
Error: Not found returned from legacy loader
Error: Not found from LocateDevicePath
(x 9 times)
Error: Load Error while (re)opening our installation volume
The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
(Hey Apple please send out a updated firmware that fix this issue?!)
So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ? Or just run windows on the mac and forget about mac software ? What a stupid solution...

There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
This is 5 page thread, so a little more 'meat' to it:
https://discussions.apple.com/thread/3410900?start=60&tstart=0
And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
What you have here seems to be everything and everyone is excluded unless there is a mac-model device ID string that specifies yes. An unnecessary hurdle.

How do I install windows 7 drivers correctly on my macbook pro retina?

I've installed Windows 7 Ultimate (64 bit) twice now, and each time I get on, none of the bootcamp drivers seem to be installed correctly. This means I can't access the internet because a network adapter isn't present, and I can't play games because the NVIDIA drivers aren't there. I've seen other people have had this problem in the past, but their fix was to download bootcamp 3.x from Apple's download site, but obviously that doesn't work now as the version is newer.
Does anyone know how to correctly install Windows so this doesn't happen, or how to get the drivers installed correctly?
Thank you very much for your time

For 2 reasons, and they are about the hardware.
1) Apple/Mac and BC restrict the way you use the computer. Maybe not for you but for me. It does not allow you to create any other parttitions for Windows to use. You can't even re-partition the BC partition into 2 drives. That will HOSE the Windows system and maybe the OS X part.
2) Apple/Mac does not allow the use of all the hardware. You can not use both graphic cards. switch between them. Windows Must use the descrete graphics adapter which cause the system to run hotter. This is a limitation imposed by Apple as with Reall Windows PCs that have both the Interl embedded and add-on descrete graphics you can switch between them.
Actually BC 4 has been out since Lion shipped on new Mac's. BC 4 also restricted the installation of Windows to just Win 7, no more XP. Which was what you could do with Snow Leopard and BC 3
Message was edited by: Shootist007

How do I install Windows with my OEM disc?

Similar Messages

Maybe you are looking for