How do I install windows XP on Lion

I want to install Window XP English Version to my Mac. I need to use this operating system to comunicate to my Air Condition System Manager

Have you looked into using Bootcamp to accomplish this?  I just loaded WIN 7 using it and it was flawless. You need to pay attention to the instructions in each window as you go and you should be good to go.  You will need a thumbdrive or a writable CD, and a lisenced version of XP, that's it.  Make sure you are using the most recent version of Bootcamp.  I did this on a late 2011 MBP 17.
Hope this helps.
Ps there is a lot of help in these forums that can assist you in accomplising most anything,
Good luck
Dana

Similar Messages

  • How can I install windows XP in bootcamp on lion OS?

    Whenever I try bootcamp for Windows XP it only asks for Windows 7 and do not recognize Windows XP disc. Drivers are also not available for XP.
    Please help.
    Can I install XP using VMware fusion?

    Answered almost daily since Lion came out.
    FAQ and How To plus manual:
    www.apple.com/support/bootcamp
    No you cannot.
    Can i install windows XP on Lion?
    Sure, any VM should be fine.
    XP reached EOL and no security updates or patches anymore from MS of course and with all the inherent issues.

  • How do I install windows from USB on Macbook pro 3,1

    How do I install windows from USB on Macbook pro 3,1 ?
    My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
    - My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
    I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
    Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
    Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
    After rEFIt I booted and then I got this error:
    Starting bootmgr.efi
    Error: Unsupported while loading bootmgr.efi
    I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
    Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
    Point: Nothing is wrong with the windows software, and windows runs fine.
    I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
    Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
    Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
    rEFIt - Booting Legacy OS
    Starting legacy loader
    Using load option ´USB´
    Error: Not found returned from legacy loader
    Error: Not found from LocateDevicePath
    (x 9 times)
    Error: Load Error while (re)opening our installation volume
    The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
    (Hey Apple please send out a updated firmware that fix this issue?!)
    So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ?  Or just run windows on the mac and forget about mac software ? What a stupid solution...

    There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
    This is 5 page thread, so a little more 'meat' to it:
    https://discussions.apple.com/thread/3410900?start=60&tstart=0
    And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
    What you have here seems to be everything and everyone is excluded unless there is a  mac-model device ID string that specifies yes.  An unnecessary hurdle.

  • How do I install windows 7 drivers correctly on my macbook pro retina?

    I've installed Windows 7 Ultimate (64 bit) twice now, and each time I get on, none of the bootcamp drivers seem to be installed correctly.  This means I can't access the internet because a network adapter isn't present, and I can't play games because the NVIDIA drivers aren't there.  I've seen other people have had this problem in the past, but their fix was to download bootcamp 3.x from Apple's download site, but obviously that doesn't work now as the version is newer.
    Does anyone know how to correctly install Windows so this doesn't happen, or how to get the drivers installed correctly?
    Thank you very much for your time

    For 2 reasons, and they are about the hardware.
    1) Apple/Mac and BC restrict the way you use the computer. Maybe not for you but for me. It does not allow you to create any other parttitions for Windows to use. You can't even re-partition the BC partition into 2 drives. That will HOSE the Windows system and maybe the OS X part.
    2) Apple/Mac does not allow the use of all the hardware. You can not use both graphic cards. switch between them. Windows Must use the descrete graphics adapter which cause the system to run hotter. This is a limitation imposed by Apple as with Reall Windows PCs that have both the Interl embedded and add-on descrete graphics you can switch between them.
    Actually BC 4 has been out since Lion shipped on new Mac's. BC 4 also restricted the installation of Windows to just Win 7, no more XP. Which was what you could do with Snow Leopard and BC 3
    Message was edited by: Shootist007

  • How do I install Windows XP with boot camp assistant, on my IMac?

    How do I install Windows XP with boot camp assistant, on my IMac?

    Lion cannot BootCamp XP.
    You can install XP under virtual machine software (Parallels, VM Fusion, VirtualBox).
    And Windows 7 Pro has XP mode.  XP will requires probably days of pathing after install and will be completely unsupported by MS within 1 year, but Windows 7 Pro still has great support from MS.

  • How can I install windows XP in my Macbook using bootcamp?

    I`ve just bought my mackbook Pro and I`m student of engineering. I`d like to install windows XP in my macbook to use some especifics softwares! But when I use bootcamp, Mac just gives me the option to install Windows 7? How can I install Windows XP? Thanks at all!

    Bootcamp 4 which ships with Lion doesn't support XP or Vista, only 7.  Try using Parallels or VMWare instead.

  • How can I install Windows 7 on Macbook Pro 17' (2009 model)?

    I cannot Install, neither enter on the setup screen.
    When I go to Bootcamp (3.0.1) and do everything then at the end when it says to done & restart my Macbook Pro 17' Inch (2009 model (MacbookPro 5,2)).
    I get into a white screen (bootscreen) then it goes into a blackscreen. I am in the Setup screen because I hear my DVD reading when I press enter.
    When I restart I get back to the Windows Setup but to enter back to Mac OS X I had to reset my PRAM and NVRAM.
    Pease help ?

    Let me get this - because the title misled me as to what you are asking, ie:
    I cannot Install, neither enter on the setup screen.
    When I go to Bootcamp (3.0.1) and do everything then at the end when it says to done & restart my Macbook Pro 17' Inch (2009 model (MacbookPro 5,2)).
    I get into a white screen (bootscreen) then it goes into a blackscreen. I am in the Setup screen because I hear my DVD reading when I press enter.
    When I restart I get back to the Windows Setup but to enter back to Mac OS X I had to reset my PRAM and NVRAM.
    Does the above really tell the story?
    The issue isn't "How can I install Windows" but more like "I am trying to get past " an issue with Boot Camp 4.01.
    Some people that already had BC 4.x installed had trouble after March's "Patch Tuesday" which was a critical number of security patches and updates. They had to rollback, uninstall an update/driver, before they could move forward.
    The trouble with "had to zap pram to get back to Mac OS" is more to do with the health of the partition table and nvram, and you could try using both Windows control panel to set the default OS, and set Startup Disk control panel in Mac OS (click OFF the volume name, then back to the volume, too).
    Sometimes there are problems with 3rd party NTFS for OS X that people use as well.
    Boot into Lion Recovery - that should be first step if there are problems with Mac, and you don't sound like you tried boot Windows DVD (which I asked above, which can fix errors).

  • How can I install Windows 8.1 Enterprise on my Macbook Pro  With BootCamp?

    How Can I Install Windows 8.1 Enterprise on my MacBook Pro?

    Hi Armin.S,
    I apologize, I'm a bit unclear on the exact nature of your question. If you are asking about the system requirements for running various versions of Windows under Bootcamp, or just more generally how to set up Bootcamp on your Mac, you may find the following articles/pages helpful:
    Boot Camp: System requirements for Microsoft Windows operating systems
    http://support.apple.com/kb/HT5634
    Mac Basics: Using Windows on your Mac with Boot Camp
    http://support.apple.com/kb/HT1461
    Apple - Boot Camp Support
    https://www.apple.com/support/bootcamp/
    Regards,
    - Brenden

  • How do i install windows 8 on a late 2012 mac pro?, how do i install windows 8 on a late 2012 mac pro?

    how do i install windows 8 on a late 2012 mac pro?

    Follow the directions here http://www.apple.com/support/bootcamp/

  • How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?

    How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?
    My optical drive is non-functional and I want to dual boot with win7. The only problem is my macbook does not boot from USB at all, even when I hold th ALT key down when it is starting up.
         -I have a flashdrive with win7 on it.
         -I mounted the ISO of win7 with toast for bootcamp to do its thing.

    Good luck.
    Consider this a bump so that hopefully someone with better news spots your thread.
    Allan

  • How can i install windows games in my macbook pro

    I m a game lover but since i've macbook pro,i haven't played any game on my macbook...so guys please tell me how can i install windows games to my macbook pro.

    As eww said, that computer isn't specifically made for gaming. To get advanced graphics in a game, your computer needs what is called a "discrete" graphics processor, or GPU. This means a seperate chip that processes graphics. In Apple laptops, these are only found in the 15" and 17" MacBook Pro. It is not common to find these in laptops in general that are not expensive and high-end. What you have in yours is an "on-board" or "integrated" GPU. This means that graphics processing is done by a small portion of your main processor (the Intel i5 board). This takes away a portion of primary prossessing and dedicates it to graphics. This works perfectly find in most scenarios, but video rendering, gaming, and 3-D graphics tend to suffer. Most high-end, modern games require discrete GPUs to run at full quality these days.
    As far as running Windows 7 and Mac OS both, yes you absolutely can. If you install Windows 7 via Bootcamp (this would require you to have a Windows 7 CD), when you turn on your computer it will default to opening up in Mac OS. But if you hold down the Option key (bottom of the keyboard next to the Command button) while the computer is booting up, it will ask you if you want to open Windows or Mac OS.

  • How can i install windows game on my mac actually i download a cricket game 2009 how i can inastall in mac

    how can i install windows game on my mac. actually i download a cricket game 2009 how i can inastal in mac

    It will never run in OS X. You need to install Windows on your machine.

  • How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.

    How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.
    I have Boot Camp 5.1.2 (497) and there is no option for installing using USB. I have downloaded an image of Windows 8.1 already.
    I can't install using DVD R/W because it's not working.
    Please help me.
    Thank you.

    unlocked by myself
    thanks

  • How do I install windows 7 on my iMac

    How do I install windows 7 on my imac

    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
         1. Install the Apple Boot Camp software.  Purchase Windows
             XP w/Service Pak2, Vista, or Windows 7.  For Boot Camp
             4.0 and above you can only use Windows 7 or later. Follow
             instructions in the Boot Camp documentation on
             installation of Boot Camp, creating Driver CD, and
             installing Windows.  Boot Camp enables you to boot the
             computer into OS X or Windows.
         2. Parallels Desktop for Mac and Windows XP, Vista Business,
             Vista Ultimate, or Windows 7.  Parallels is software
             virtualization that enables running Windows concurrently
             with OS X.
         3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
             or Windows 7.  VM Fusion is software virtualization that
             enables running Windows concurrently with OS X.
         4. CrossOver which enables running many Windows
             applications without having to install Windows.  The
             Windows applications can run concurrently with OS X.
         5. VirtualBox is an Open Source freeware virtual machine such
             as VM Fusion and Parallels that was developed by Solaris.
             It is not as fully developed for the Mac as Parallels and VM
             Fusion.
    Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Benchmarks of all of the above except Crossover can be found in Benchmarking Parallels, Fusion, and VirtualBox Against Boot Camp - The Mac Observer. Boot Camp is only available with Leopard or later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • How do i install windows 8 on new imac late 2012 model

    how can i install windows 8 onto a new imac without a disc drive

    Kappy wrote:
    I would forgo Win8. Apple does not yet support Win8.
    Not to mention it hasn't exactly had outstanding reviews and people don't seem to be happy with the changes...

Maybe you are looking for

  • Virus protection for my macbook pro

    Does anybody know of a good Virus protection for my macbook pro? Some people say i dont need one is that true? I was hoping to get a cheap/reasonable priced protection for a lil extra help. Im worried about my laptop getting a virus.

  • SAP excile file upload

    Hi, We added upload/download functionality for 2 new fields in the a table maintenance program. The Program has manual entry fields that do system calculation to derive another field. Currently the system allows a user to upload any value in the deri

  • Elements 11, PC Windows 8.  Problem: Process Multiple Files is grayed out.  How can I activate it?

    I have to reduce the resolution for files in a folder.  I have done this in the past but have a problem with the reinstall of Elements 11 on a PC that lost it's mind and had to reinstall all software.  The Process Multiple Files under the File headin

  • [solved] apophenia: make succeeds, makepkg fails

    Hello! I tried to write a PKGBUILD for a statistics library called apophenia (http://apophenia.info/). I can './configure && make' in the source directory without any problems, but when I run makepkg the build fails with the following error: CC apop_

  • Procedure/function

    Hi, I have records like as follows. ordernum location qyantityord quantityreceived 123456 123 0 700 123456 124 700 21345 213 0 801 21345 222 800 34567 123 0 870 34567 124 870 So now I am going to shift the quantityreceived which has the exact quantit