How do i install with no dvd drive

My laptop doesn't have a dvd drive how do I install my photshop?

Direct Download Links for Adobe Software
Mylenium

Similar Messages

  • How do I install Tiger without DVD drive?

    How do I install Tiger without DVD drive on a Powerbook?
    My Powerbook had some problems recently, the HDD and the Superdrive where gone. I replaced the HD but can not get Tiger installed here because the DVD drive isn't working. I boot right now from a FW HD. Any Ideas how to install the OS on the internal drive?
    Any ideas would be apreciated.

    See Option 2 in
    <http://docs.info.apple.com/article.html?artnum=304129> or Option 1 in
    <http://docs.info.apple.com/article.html?artnum=303028>
    It has worked for at least one person:
    "Kenichi Watanabe
    Posts: 853
    Registered: 2-Sep-2003
    Re: Using DVD drive in iMac G4 for iMac G3 in Target Disk Mode-->won't read DVD
    Posted: 26-Oct-2006 4:37 PM in response to: AJ Nealey
    Reply Email
    I just tried it between a Power Mac G5 and a PowerBook G3 (Pismo) and it worked. The G5 was Mac in Firewire Target Disk Mode. I started the G5 with the T with no DVD in the drive. I started up the G3, and the G5's hard drive appeared on the G3's desktop. I pushed the eject key (on the G5 keyboard) and the SuperDrive opened. I put in a DVD (the Tiger installation disk) and closed the SuperDrive. The DVD appeared on the G3's desktop. I restarted the G3 with the Option key held down, and the DVD in the G5 appeared as a valid startup choice."

  • How do you install MACOSX without DVD drive?

    hey guys,
    I have a Powerbook, the DVD drive does not work anymore. I would like to format my Powerbook. I remember hearing that you can install MAC OSX via network?
    The Powerbook is my only MAC computer, I have another computer which is a PC running on Windows XP. Is there anyway I can put my original MAC OSX bootup disk on the PC and have it read by the Powerbook via ethernet network?
    If there is a more simpler solution, please advise.
    PS. I'm aware I can use an external firewire DVD drive, but I do not have access to any at this point, and unfortunately can't spend money on one. I'm broke from school tuition, books and the necessities of life.
    Thanks again for your help and support.
    Teddy

    You can only install OS X over a server running OS X Server. If you don't have access to an Apple server then you cannot install over a network.
    If you have access to another Mac with a good DVD drive it is possible to use Target Disk Mode to do what you want.
    How To- Installing Tiger Using FireWire Target Disk Mode
    How to Use FireWire Target Disk Mode

  • How to reinstall OS with dead DVD drive?

    Hi everyone. I recently upgraded to a new MacBook, and have an iBook G4 which I want to sell. Unfortunately the DVD drive has died in it. I put it in target disk mode, hooked it up to the MacBook, did a secure wipe of the hard drive, and then (mistakenly) thought I could run the installer from my MacBook and install a fresh copy of the OS on the iBook. You used to be able to do this sort of thing back in the old OS9 days, but when I try and boot the old installer on my MacBook it says that it can't be used on this machine, and when I try and run the installer on the MacBook it tells me to reboot the machine.
    Is there any way to do this? Or am I going to have to replace the DVD drive before I sell it?
    Message was edited by: Mac VFX Artist

    I understand the concept, but will that work? This is an Intel machine, whereas the iBook is Motorola. I have a PowerPC Tiger installation disk. If I try and install it the MacBook thinks I'm trying to install a PowerPC OS and won't let me do it. If I use the MacBook install disk it will (I believe) install an Intel OS on a PowerPC computer. (Or will it install a UB OS?)
    I even went into the individual installers at Install/Disk/Installation/Packages/ and ran OSInstall.mkpg. This boots, but when it gets to the list of disks it won't let me install on any external drives, saying "Mac OS X cannot start up from this volume," presumably because I'm trying to install a PowerPC OS.
    Ugh!

  • How does eject work with 2 DVd drives fitted?

    I have a Mirror Door Powermac G4 and want to run two DVD drives. What worries me is how I'll eject them since I use the eject keyboard button. When I press eject will both drives eject simultaneously?
    Anyone got experience of running two optical drives at once in a Powermac?

    On some Macs, you can press Option-Eject to open or close the tray of an optional second optical drive.
     Cheers, Tom

  • How do I install bootcamp on the new drive that I installed with the dvd drive adapter

    Hello, I have a macbook pro mid 2012 13 inch, I have just earned some money, enough to buy a SSD, and I happily went to the store and bought a samsung evo 840 120gb SSD. My plan was to clean install windows 8.1 on the SSD, I already had bootcamp on the 500GB HDD with windows 8 that came with the mac, so I backed up the important files from the windows partition. I deleted the partition, and restored it to the mac's partition (which I was going to partition again after the windows installation is complete for the storage for my windows partition) I made a installation usb with the iso I have made with bootcamp assistant, and waited. After that was done I restarted my computer holding the option key, then I booted into the EFI boot partition, and went through the process, entered the serial key, and agreed the thing, and then  when I did the format it said it couldn't do it, so I took it out put it in an external hard-drive case, then I plugged it into my windows 8 laptop, then I opened command prompt, then I typed "diskpart", then after the administrator thing popped up, I clicked yes, then in the diskpart prompt, I typed in "list disk", and my SSD was disk 1, so I did "select disk 1" then I typed "clean" Then I went into the drive manager, then a thing popped up saying which one would I choose between MBR or GPT so I selected GPT, then made a new NTFS partition on the SSD, then took it out, then I popped it back in then went through the installation, until the actual installing part where after copying files is done, this pops up "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. Error code 0x8007045D" So I downloaded a torrent because I had thought that this was corrupted, and downloaded a torrent from a website, and downloaded the iso, and I tried and the same error, again and again of taking out the drive from my computer to format it and putting it back in again (since there was some files made on the SSD) so I had decided that I would download a windows 8 torrent, then I did then it couldn't even start, so I want to install windows 8.1 on my macbook pro, on a separate drive in the the DVD cage (not external, internal), would there be any way to do it, please help!
    Specs:
    Macbook Pro Mid-2012
    OSX 10.8.5
    i5-3210m
    Samsung 2x4GB 8GB RAM (Dual Channel)
    Hitachi 500GB (comes with it) in the normal hard drive cage
    Samsung EVO 120GB SSD in the DVD cage

    1. The disk layout in OSX Disk Utility.
    2. Choosing the Free Space partition.
    3. Executing the installer
    4. After the installation, from W8.1 Disk Management.
    5. On a soon-to-be-released OS, diskutil list before and after W8.1 EFI installation.
    diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *256.1 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:          Apple_CoreStorage                         128.7 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                  Apple_HFS OSY-MBP13              *128.3 GB   disk1
                                     Logical Volume on disk0s2
                                     AFB7276E-51EF-478F-98A1-47D941BD9843
                                     Unencrypted
    diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *256.1 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:          Apple_CoreStorage                         128.7 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
       4:         Microsoft Reserved                         134.2 MB   disk0s4
       5:       Microsoft Basic Data                         126.4 GB   disk0s5
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                  Apple_HFS OSY-MBP13              *128.3 GB   disk1
                                     Logical Volume on disk0s2
                                     AFB7276E-51EF-478F-98A1-47D941BD9843
                                     Unencrypted

  • How to install Snow Leopard on a Mac with busted dvd drive

    My problem is that my Mac Mini doesn't read all CDs or DVDs - including the new Mac OS X v10.6 Snow Leopard that I just bought. From the support articles, I figured that I could install remotely, as you do if you have a MacBook Air. I couldn't get it to work, until I read this article:
    http://jasonevangelho.com/2008/11/02/how-to-really-enable-remote-disc-dvd-drive- sharing-non-air-macbook/
    All it took was two commands in Terminal.
    I hope this will be helpful for others too.

    Snow Leopard (SL) upgrade in my mac mini failed part way through and when I tried to re-do the upgrade, it would give me a blue screen (via DVI to my HD TV).
    So, following the advice I found elsewhere, I did the following:
    Booted up my 24" iMac, inserted SL disk into iMac.
    Turned off mini, connected mini to iMac w/firewire cable.
    Started mini and pressed and held the T key on the mini keyboard until it mounted on my iMac (seen in Finder) as a hard drive.
    Started SL installation icon (iMac) and indicated that I wanted to install on the mini hard drive.
    It went through a number of steps, then asked AGAIN which drive I wanted to install SL.
    Then took quite a long time (upwards of 1.5 hours) to install, and the estimated time left during the install would sometimes appear frozen at 40 minutes, but the blue bar kept extending indicating it was making progress.
    I was able to then boot SL on my iMac off the mini hard drive and configure everything (making sure that back to my Mac/mobile me was up and running and the proper in home network was correct).
    Then "shut down" the iMac (which was still running off the mini hard drive), then powered down the mini.
    Moved the mini out to it's normal place and reconnected to the HD TV and started it up and everything was perfect.
    BTW, as many people know, if you're having video out difficulties with your mac mini, it's nice to be able to go "back to my mac" via another iMac to adjust the configuration. It's saved me a couple of times.

  • ?I have Adobe Photoshop elements 12, my computer crashed and I purchased a notebook with no DVD drive, how do I install my product on my new computer?

    ?I have Adobe Photoshop elements 12, my computer crashed and I purchased a notebook with no DVD drive, how do I install my product on my new computer?

    Download is for multiple languages, including English

  • How to buy and install mac os x 10.6 in a late 2007 mac book with no dvd drive?

    i want to buy snow leopard for mac book with no dvd drive, but the only choice in app store is dvd copy, no digital copy!

    You'd have to have someone with a DVD drive make a Disk Image of the DVD, have them Restore that .dmg to a Flash drive that's big enough, the boot the MB using alt key to choose to boot from the USB Flash drive.

  • Want to purchase new mac mini but I do not know how I would install programs from dvd without internal optical drive

    I am planning to purchase new mac mini that just came out today but I do not know how I will be able to install programs or save stuff to disk when there is now internal optical drive.  I know I could purchase an external drive but is that necesary. Thanks.

    If you have access to another Mac with an DVD drive you should be able to share it using Apple's drive sharing feature in the OS or at the very least if you have a firewire cable boot into firewire disk mode...

  • Install Windows 8 on macbook pro with external dvd drive

    My superdrive have broken, anyone have experience installing windows 8 on macbook pro with external dvd drive?
    Last night, I tried but end of with black screen.

    Bguzryanto wrote:
    the main point is 'anyone have exprerince install windows 8 with external dvd drive on macbook pro'
    Purchase new superdrive, takes 2-3 weeks for shipping at my city.
    It can't be done. If your computer has an internal optical drive, working or not, that is the drive you must use. Only computers such as the Macbook Pro Retina/Macbook Air that have no internal optical drive can install Windows from an external drive.

  • Install DVD onto MacBook Pro 13" with NO DVD Drive

    My son has a MacBook Pro 13" with no DVD drive.. He received iLife ON DVD.. What is the simplest way to get the contents of that dvd installed onto his macbook?
    Is there a way to download the ilife and just type in a serial # etc. from the DVD?

    You cannot download iLife from the Internet for free.
    Instead, you have two options to install iLife:
    1. Get an external DVD drive and use it to install iLife, or;
    2. If you have got another PC or Mac, use Remote Disc > http://support.apple.com/kb/HT5287?viewlocale=en_US&locale=en_US
    Note that your son's MacBook Pro already comes with iPhoto, iMovie and GarageBand, which are iLife apps. However, he needs the DVD to install iDVD and iWeb, in case he needs them

  • How can i install slim portable dvd witer lg

    how can i install slim portable dvd witer lg

    you dont have to INSTALL anything, its plug and play, I have same LG drive with AIR. no install needed

  • Is it possible to install a HD-DVD drive on a Satellite P20

    Hi Everyone
    Is it possible to install a HD-DVD drive on my P20?
    My screen has died, so I'm going to use this machine as a dedicated Media Centre attached to my TV.
    If I can install a HD-DVD drive it would help a lot.
    Regards
    Richard

    Well, I dont believe that you will be able to use a new HD drive or blue ray drive on this notebook but who knows everything depends on the master / slave and c-sel settings.
    Its possible to change such settings on external desktop drives by switching the jumper but something like that is not possible on slim line internal drivesusually the firmware controls this settings on notebooks drives.
    It seems nobody tried upgrade the P20 with such drive that because this is a new technology and at this time you will not find many internal HD or Blue Ray drives on the market.
    However, please come back and report if you have more info about the upgrade.

  • How do I install FF on a drive other than Win 7?

    I'm trying to conserve space on my SSD (small) and just have the OS (Win 7) on that drive. So how do I install FF on another drive, as so many of my other application programs are stored? They work great without any hitches, so far. . . But I would still like to try this with FF and Thunderbird. Thanks.

    Hi nicksdaddy,
    There is an offline version:
    http://get.adobe.com/reader/enterprise/
    Hope that helps!
    Stacy

Maybe you are looking for

  • Unable to open ".mht file" in Internet Explorer 10 and Microsoft Word running on Win7

    .mht file error in internet explorer 10 "MIME-Version : 1.0 Content-Type:multipart/relates; boundar="---=N_NextPart_01CEFB@&>FA^*@A&)" This document is a Single file Web Page, also known as a Web Archive File. If you are seeing this message, your bro

  • IDOC and Proxy to R/3 System.

    Hi I am working on a scenario where a file is read and IDOCS are sent to SAP system. My requirement is to create a proxy with a few fields like interface id, wait time and idoc type and trigger the proxy to SAP system as soon as the IDOCS are sent to

  • How to check file name in local c drive and run exe file

    Hi All, I'm newbie user in action script. How can i check sepecific file name in local c:\ drive and if file doesn't exist in local drive download from server and run and if exist go to frame ..... . Please help to me. Thanks,

  • Use material groups in FI invoices to determine the GL account

    All, For our incoming non purchase order invoices we use Vendor invoice in financial accounting in ECC 6.0 My customer wants to start using material groups in their financial incoming invoices to determine the GL Account.  ? It sounds not logical me

  • Keyword search hijacked

    For a long time I was happily using the smart keyword search. E.g. I had assigned custom searches to the letters "d","e","w". All of a sudden, they lead to different destinations. Whatever I tried to change them back - no luck. Please do not suggest