How do I integrate a new camera into the MAX system?

I'm working on modifying the interface to an existing camera evaluation board. The design of the interface is changing enough that the current .ICD file and .txt for the camera might need to be changed. I'd like to know what information is available for creating a new configuration that can be used by MAX.
I'm using the PCI-1422 board. Software is being developed using MSVC++. Windows 98 is most likely the target system.
Additionally, the PCI-1422 board shows a series of control signals (Control<0..3>) available on the interface. However, I see no documentation on how these lines might be used. Can somebody point me in the right direction?
Thanks for your time.

You will get much better results posting this question to the Vision section of developer's exchange instead of here. This forum is for the Measurement Studio MSVC++ tools discussion.
Best Regards,
Chris Matthews
Measurement Studio Support Manager

Similar Messages

I came into the store because my middle button was not working. Then they gave me a middle button that's on the screen of my phone. I got a new phone do now my middle button doesn't work but I still have the internal digital button, how do I remove it?

I came into the store because my middle button was not working. Then they gave me a middle button that's on the screen of my phone. I got a new phone do now my middle button doesn't work but I still have the internal digital button, how do I remove it?

Settings>General>Accessibility>(scroll down to)AssitiveTouch and change to Off

How can i create a new camera roll?

How do you create a new roll in the photo app on an iPhone?

You cannot.
Camera Roll is temporary storage for pis taken with iphone. They should be imported regularly to your computer as with any digital camera. From there you can sort them however you like and sync them to the iphone.

How can we open a new folder in the email account (ex: need to save certain emails into a new fodder called "work". can anyone help

How can we open a new folder in the email account (ex: need to save certain emails into a new fodder called "work".
Anyone can help?

Right click on any folder in mail and select Create new mailbox.

With firefox, how do I bookmark a new page into folder contained in From Internet Explorer?

i imported IE favorites into firefox bookmarks. my IE favorites contained many folders with different categoties of information......eg., folders for car repair, investments,etc. now that i am using firefox, how do i
bookmark a new page into one of the existing IE favorite folders? I have tried every option I could think of using the options shown when i click bookmark this page.......i am getting as far as FROM INTERNET EXPLORER, but i can't seem to find a way to reach one of the sub-folders within the FROM INTERNET EXPLORER folder? also, nothing is happening when i click on the star symbol to the right of the address space?

thanks for the suggestion....sounds good to Old Goofy! Before your response was received, I continued to fiddle with the popup box that appears when you click the "bookmark this page". in my fiddling, i noticed that at least once, a litlle small solid triangle appeared just before From IE....I clicked on that little triangle and voila, there were all my sub-folders under the main IE folder!!! Nowhere in all the old posted Firefox support had I seen I clear illustration of doing this......probably I missed it or I'm just a dumbie?
Meanwhile, if anyone is having all kinds of strange problems with computer, and no browsers including IE, with the exception of Firefox, are working properly, if you have Norton Security on your computer and it al;so is not working properly, UNINSTALL NORTON!!!!!!!!!!! That was my situation, to the extent HP free support was going to help me wipe the drive and try to put the computer back "as new", but using a different security program!!!!!

In iPhoto 11, I know how to create new libraries. I do not know how to split my existing large library into the new ones.

In iPhoto 11, I know how to create new libraries. I do not know how to split my large existing library into the new libraries?

You need to use the iPhoto Library Manager.
(66928)

TS3274 How do I get the Camera into the video mode

How do I get the Camera into the Video mode

Swipe up or down on the Camera function selector to move it to the desired position.

How do I create a new calendar for the current year, using last years calendar's birthday's/photos and comments from the lower pages?

Each year for the past 5 years I make a family calendar and send copies to all he family members around the globe. I hate that I have to recreate all the birthdays and special occasions from scratch, and re-drag all the photos onto these dates, in the lower half of the page of each month on the new calendar. How can I create a new calendar for the current year and port all of these photos/comments into the new calendar from last years calendar, to save having to redo all this work!! I am not talking about the upper half page of the photos only...I am referring to the calendar page of each month.
Thanks in advance.
Colin

Welcome to the Apple Discussions. Open iWeb so you see your original site in the left hand pane. Use the File->New Site menu option to create a new site. Give it the name you want.
Now select a page in your original site and type Command+D. That will duplicate the page. Drag the duplicate page down to the new site and rename it as needed. Do that for the other pages you need in the original site.
OT

How do I add a new font to the list?

In "Tools/Options/Content/Advanced" how do I add a new font to the list? I have "Comic Sans MS" listed for one of the options, but the drop-down menu does not contain that option, so I can't select it for another font option.

Thanks for your reply.
As to your question: No, of course I wouldn't scroll down, it's in alphabetical order, so why would "C" for Comic Sans MS be anywhere but between B and D on the list?
Now a question for you: If person or group was going to alphabetize a list and then break it down into sublists, why would he, she, they not include headers for each portion and maybe even indent each font name, so a person might have a chance of getting the drift?
Also, how do you add new fonts to the list?

I would like to import two different cf cards from two different cameras into the same project/folder and have them be in order of the times they were taken, is there a trick?

I would like to import two different cf cards from two different cameras into the same project/folder and have them be in the order of the times they were taken, any ideas on how to do this?

Just import them normally and sort the project by date. They will fall into place. If you tried this and it isn;t happening then make sure the data and times on the two cameras are identical and make sure you are sorting by date and time and nothing else.

How do I insert a video clip into the timeline?

Do you happen to know how I could insert a video clip into the middle of a movie like you do in FCP? Can you add tracks and insert the clip above the spot i need to change for each movie.
I don't want to render the whole movie (convert it into a MPeg2) each time.

No - DVD timelines are a little different to FCP. If you need to add a clip to the stream, you need to split the exisitng clip (you could trim it back to where you want to insert the new piece) and drag the new piece onto the same timeline. If you trimmed the existing piece then add another instance of it to the timeline and trim the new part from the left until you get to what you want as the out point.
If you have a collection of video clips on your DVDSP timeline, simply dragging a new one on will shuffle the others along appropriately. However, the audio will not shuffle with them, and you'll end up moving it all manually.
The very best thing is to create the timeline precisely as you want it in FCP and encode it to MPEG2 before bringing it in to DVDSP. Remember that DVDSP is not an editor, it is a place to assemble your work - it won't do anything remotely like FCP in that respect.

How can I get a new copy of the Voicemail app for my LG Spectrum?

How can I get a new copy of the Voicemail app for my LG Spectrum? It no longer works....the screen say Loading please wait....the
!Visual Voice Mail - A Visual Voice Mail error has occurred. Please try again. OK I've tryed several times with the same message. I've
deleted the app from my screen and replaced it from the Apps Library....still the same message.
I cannot find an answer on MyVerizon. Any ideas?
Thank you,
Dee

OK, at least 3 is working.
I don't know how you have a Tape Recorder icon on your Home Screen. I cannot add one myself. But, I am running Holo Launcher in replacement of the default LG "Optimus" User Interface. It's much better in my opinion.
Try long pressing the icon and select Edit and maybe you can change some attribute of the icon.
Another thing you could do, is long-press an empty area of your desktop, to add an icon. Select Shortcut, then Select Contact, and scroll through your contact list and choose the contact that you added for *86.
You realize if you have voice mail you haven't heard, there is a tape recorder icon in the notification bar, which you touch and pull down, then press it to dial voicemail.
If that functionality doesn't work, you MIGHT want to consider doing a factory data reset on your device, but that is going to nuke all your personalizations and cause you work to set up again.

On Firefox 4, how can I put one "new tab" on the "tab bar" (The + sign) and one next to the "back/forward" buttons (as in FF 3.6)?

On Firefox 4, how can I put one "new tab" on the "tab bar" (The + sign) and one next to the "back/forward" buttons (as in FF 3.6)?
In my current Firefox, the "new tab" icon/item from the "customize" pop-up window menu of items is placed next to my home, back, forward buttons near the top-left of my header (Button 1 for "new tab"). Then, the tab bar automatically come with a small tab (with a + sign) to the right of your last tab opened (so you click on + and a new tab opens. Button 2 for "new tab"). I like to have this "new tab" button twice (as a + mini tab, and next to my "home icon".
When I upgraded to Firefox 4, I seemed to be only able to "customize" or use the "new tab" in one place. Either as an icon next to home button, or as a "+ minitab", but NOT both.
What can I do to put this button in Firefox 4 on BOTH places???
Your help is really appreciated. I want to upgrade, but I want my buttons on both places...
I upgraded to FF 4, but downgraded again just because this feature... that's just me of coarse :-)

*New tab toolbar button: https://addons.mozilla.org/firefox/addon/new-tab-toolbar-button/

How do I add a new computer to the canning fuction on my

How do I add a new computer to the scanning function on my PIXMA MX870? I can send print jobs to it from the new computer, but it tells me to "Set the PC to start scanning" when I try to scan to it. The old computer still accepts scanned images when it is turned on.

Hi, Illiniboy67!
So that the Community can help you better, we will need to know exactly which operating system is running on the computer you're trying to connect to the scanner, and how it's connected (USB, ethernet, or wi-fi). That, and any other details you'd like to give will help the Community better understand your issue!
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

How do you add a new icon to the home screen?

How do you add a new icon to the home screen?

The only new icons you can add to your home screen are webclips, which can be added by using the "+" button in safari on the desired web page.
You won't be able to add new apps until February when the SDK is fully seeded to developers.

How do I integrate a new camera into the MAX system?

Similar Messages

Maybe you are looking for