How do I invert the horizontal trackpad scrolling in Dreamweaver CC code window (Mac)?

Having recently installed CC I'm enjoying all the apps so far...although Dreamweaver (which I use quite a lot) is showing unusual scrolling behaviour.
In my previous version of Creative Suite, for all apps I have a two-handed approach where I use the trackpad to navigate around the document with two fingers, while using a mouse to select the code/element etc.
I have already turned off the default 'natural' vertical scroll because it feels more intuitive to me (i.e. if I want to scroll down the page, I pull down with two fingers).
However, with this new version of Dreamweaver, it breaks convention by having reversed the left-right scroll direction, which has thrown me because it is the only app so far that goes against the norm. Previously if I wanted to see code off the right hand side of the window, I would swipe right, but now I have to swipe left. I had a look at the settings and couldn't see a way of changing this.
Can anyone help?
Thanks

Yes, this issue has been fixed in DW CC 2014.1 release. Please try the same.
More on this is below
Dreamweaver October 2014 release is now live! Important information.
Install instructions are below
Installing the latest update of Dreamweaver CC 2014

Similar Messages

  • How can I retrieve the serial number from my Dreamweaver CS5.5 installation (mac OS X)?

    I don't have access to the serial number any other way.
    Thanks,
    SC

    If you registered your product, you can retrieve your serial number by logging into your Adobe account.
    https://accounts.adobe.com/
    Nancy O.

  • The Horizontal & vertical scroll is not visible or not working when i run the form in Forms 6i.

    Hi all,
    The Horizontal & vertical scroll is not visible or not working when i run the form.
    In this form , there are 5 canvas namely
    CANVAS2 - Stacked Canvas
    PASS - Content Canvas
    MAT_RATES - Content Canvas
    DATE - Content Canvas
    PREVIOUS - Content Canvas
    I have set "Show Horizontal Scroll Bar" to "Yes" and  "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
    I have  set "Show Horizontal Scroll Bar" to "Yes" and  "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
    But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
    Help me with this please. How do i make it visible??
    Oracle Forms 6i..
    Thank You.

    Vijetha wrote:
    Hi all,
    The Horizontal & vertical scroll is not visible or not working when i run the form.
    I have set "Show Horizontal Scroll Bar" to "Yes" and  "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
    I have  set "Show Horizontal Scroll Bar" to "Yes" and  "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
    But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
    Help me with this please. How do i make it visible??
    Oracle Forms 6i..
    Thank You.
    hello vijetha,
    window and canvas show scroll bar when it need.
    You should show block property
    and set block scroll bar
    hope this helps..
    Hamid

  • How do you reactivate the grey utilities scroll up tab at the bottom of the screen that should reveal wifi, bluetooth etc? Doesn't matter what orientation the ipad is in, it won't scroll up from the bottom. All other screen functions work normally.

    How do you reactivate the grey utilities scroll up tab at the bottom of the screen that should reveal wifi, bluetooth etc?
    Doesn't matter what orientation the ipad is in, it won't scroll up from the bottom.
    All other screen functions work normally.

    Settings/Control Center. There are two options which are pretty self-explanitory...one enables/disables access on the Lock Screen and one enables/disables access within apps/games.

  • How do I disable the hardware acceleration in Flash player on a Windows XP machine remotely?

    How do I disable the hardware acceleration in Flash player on a Windows XP machine remotely?
    I have a few hundred computers running Adobe Flash Player.
    The operation system is Windows XP.
    They are Compaq 6005 desktop PC’s, with an inbuilt ATI radeon HD 4200 video card.
    We have a persistent issue where viewing a flash video (e.g. something on youtube) causes the video card driver to crash.  You are left with no video signal to the monitor.  Audio continues and the computer still responds to commands. This only happens when watching flash video.
    We have tried:
    Updating flash plugin (numerous versions)
    Updating the video card drivers (we have tried the last three video card driver versions, including the HP drivers and ATI drivers)
    Updating the browsers (this problem happens with IE8/9 and Firefox10/11/12)
    There seems to be two ways to work round this issue.  One is to disable the video acceleration in the ‘troubleshoot’ section in the advanced part of the display settings area in windows.  The other way is to start a flash video, right click, go to ‘settings’ and untick the box marked ‘Enable Hardware Acceleration’.
    Doing either of these things allows the user to view flash videos with no apparent issues.
    Is there a way to disable the hardware acceleration in Flash without visiting the PC?  Perhaps an undocumented option in the mms.cfg file? I understand that you can use an option to skip the video card check, and so force hardware acceleration on, can you do the opposite?
    Thanks in advance
    Daniel.

    Hi.
    I have had over 200 views, and no suggestions as to how this could be fixed.
    I have also posted in the general flash forum, that thread has fewer views.
    If I should put this question in a different forum please let me know which one.
    If what I am asking is not possible is there a mechanism for escalating this issue or requesting a feature for the next version of flash?
    Thanks.

  • How do I change the default setting from Pages to MS Word for Mac?

    How do I change the default setting from Pages to MS Word for Mac?

    https://discussions.apple.com/message/13008817#13008817

  • How do you open the DVD tray on a K430 without using Windows Explorer?

    How do you open the DVD tray on a K430 without using Windows Explorer? I can't find a button on or below the door.  Am I missing something?  Additionally, will the K430 boot from a DVD/CD if it finds one in the DVD tray instead of the hard disk?  Please help. Thanks. 
    Solved!
    Go to Solution.

    hi penguin247,
    Regarding your questions:
    1. Can you try to press the eject symbol on the DVD bay and observe if the DVD tray comes out.
    Link to picture
    2. By default, the HDD is set as the first boot device and the ODD second on the K430. You will need to change the boot order or continuously tap F12 during POST to boot from the ODD (assuming you have a bootable media inserted).
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • How do you set the text of a Hyperlink component in code

    I am using Visual Web pack in NB 6.0. How do you set the text of a hyperlink component in code?
    Please see screenshots at
    http://coba.usf.edu/departments/isds/faculty/agrawal/projects/java/
    I have a hyperlink in a grid panel. I am using
    hyperlink1.setText("Hello"); in prerender(),
    but the Hyperlink shows up with the text "Hyperlink", whereas I was expecting "Hello". However,
    hyperlink1.setUrl("http://www.usf.edu"); works as expected.
    I tried nesting a static text in the hyperlink as suggested in the Creator guide (ed 2, Google project). I deleted the "Hyperlink" text in the properties editor but then the page turned out blank.
    Thanks
    Manish

    Hi Manish,
    Great to know you were able to fix your issue. The following blog entry has the list of resources you would like to look at for future.
    http://blogs.sun.com/NetBeansSupport/entry/useful_resources_for_visual_web
    Thanks
    K

  • How do I get The Night Sky app that I downloaded to my Mac on to my iPhone?

    How do I get The Night Sky app that I downloaded to my Mac on to my iPhone?

    Thank you for your reply.  It is a Western Digital external USB 3.0 formatted for PC.  It includes pics, videos, music, documents, power point, etc.  would it still just be a drag and drop?
    Thanks!

  • How do I see the specific things that take up space on my mac?

    How do I see the specific things that take up space on my mac? Because I want more specific than what I get if I click on the apple and storage.

    There is also another way to do this using spotlight. Lets say you want to know what is in other. You go to spotlight and type in other,then click show all. It will open a window showing what is other and when clicked on it will ,down at the bottom show the file path for anything in other that you click on.

  • HT1923 how do you get the dvd drive back after installing itunes to windows 7

    How do you get the dvd drive back after installing itunes to windows 7??

    Safari/Preferences/General and set a new default.

  • How can i download the 10.1.1.4 version on my windows 8 system?

    how can i download the 10.1.1.4 version on my windows 8 system?

    You do not.
    iTunes 10 is not supported on Windows 8.

  • How to find out the Functional module related to a T-code

    Hi All ,
    Please tell how to find out the Functional module related to a T-code.
    i want it for the T-code RSZDELETE.

    Hi
    There is no direct way to see this.
    You need to Pick the Program(Se37/38) and tables (SE16/11)and to see where its been used
    The FM for RSZDELETE is RSZ_DB_COMP_REORG_AS_POPUP.
    Hope it helps

  • How can we link the Apple iPad or any Apple device to window's based network/server?

    how can we link the Apple iPad or any Apple device to window's based network/server?
    we are software development company !
    how to use apache developed web site from windows pc in aaple i-pad
    and testing that perticuller web site on windows network !
    ipad software version 5.0.1 !
    How We Open developed web site in safari browser from i-pad !

    No ... won't work.
    If this is iPad is a first generation, the iOS should be 5.1.1.

  • How can i call the certificate selection dialog box from source code?

    How can i call the certificate selection dialog box from source code?
    NB: Of course if i have more than one certificate in the Microsoft Keystore 'My'.
    Thank You in advance

    I found an example of the "TestStand UI Expression Control.ctl" and it works just the way I need it. (check the link)
    Proper use of "TestStand UI ExpressionEdit Control" in LabVIEW http://forums.ni.com/ni/board/message?board.id=330&requireLogin=False&thread.id=10609 
    The "Expression Browser Dialog Box Button" F(x) stays disable while editing the VI, however it become available when the VI is called from TestStand.
    Thank you,
    Hecuba
    Mfg. Test Engineer
    Certified LabVIEW Associate Developer

Maybe you are looking for

  • Install the whole suite for calendar, email, tasks, & contacts

    Hello I'm trying to install the whole communication suite but I am unfamiliar with the application. I'm looking for all the functionality in the subject, however for 1 I don't know what all of the dependancies are. Once I install all of the dependanc

  • KE30 report - currency selection

    HI Community, I am looking for a possibility to select a "report" currency in the selection screen of a KE30 report. In general, when I am executing a KE30 report (e.g. in OPCON currency = EUR) I have the possiblity to translate the report output in

  • Where did the debug panel go in illustrator cs6?

    Hello illustrators. I was trying to do the  cmd+shift+option+fn+F12  to calculate the area on an object and nothing happens! so i was reading on the Internet that adobe dropped this feature no longer exists is this true? thank you.

  • Encore CS6 Rendering of Motion Menu very Slow

    I have a motion menu with 4 motion buttons 1500 frames in length. It takes 1hour and 14 minutes to render. So with 5 menus it takes 6 hours to render 5 minutes of menu. I have a HP Z800 with two X5660 xeon processors with 48gB of ram and a raid 1E di

  • Don't open Excel format

    How to repair xls file? Microsoft Excel report me what file is not Excel format.