How Do I Join a Workstation to a Domain

I'm trying to join a workstation to my domain (Server 2012 R2 Foundation). I've set the workstation up with a static internal IP address (192.168.1.2), and can both ping the server from the workstation and the workstation from the server. When
I go into system properties and change the workstation from a workgroup to the domain (Averihire.local), I get an error message saying that "An Active Directory Domain Congroller (AD DC) for the domain "Averihire.local" could not be contacted".
I'm very new to servers, so I suspect there's something else that needs to be done on the workstation and/or the server, but I haven't a clue to what it would be.
I'd very much appreciate it if someone explaining what steps must be taken in order to join the workstation to the domain.
Capt. Dinosaur

What DNS address did you assign to the workstation? It should be the IP address of your domain controller. If that's not the problem, please post the output from ipconfig /all from both the workstation and the domain controller. That
error is almost always a network configuration issue.. : | : . : | : . tim
I'm afraid I'm terribly confused here. When I posted my question above, I had set up the workstation's static IP Address to the same as the automatic one (i.e. 192.168.1.2). That gave me the error I cited above. After reading your
post, I changed it to the IP Address of the server (i.e. 192.168.1.8), and when I saved it I got an error saying that there are two computers on the network with the same IP Address, and, of course, when I then tried to add it to the domain, I got
the same error as above. Also, each time I try to set the workstation's IP Address to the 192.168.1.2, within a minute or two, the workstation loses it's internet connection. Here's the ipconfig /all for the server
Windows IP Configuration
Host Name . . . . . . . . . . . . : AVDC1
Primary Dns Suffix . . . . . . . : Averihire.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : Averihire.local
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
Physical Address. . . . . . . . . : D4-AE-52-D5-3C-03
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::51ca:6bd:aa5c:b3e7%12(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.8(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 315928146
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1B-C1-57-A0-D4-AE-52-D5-3C-03
DNS Servers . . . . . . . . . . . : ::1
127.0.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{CC3EB832-8869-48E5-B39C-0CDB5BB27590}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Here's the DNS from the Workstation, but with dynamic DNS. Every time I try to set up a static IP there it loses its internet connection:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Averi02
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom 440x 10/100 Integrated Controller
Physical Address. . . . . . . . . : 00-1A-A0-2D-F4-0D
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::297d:9587:544d:de1d%10(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Monday, December 01, 2014 6:10:57 PM
Lease Expires . . . . . . . . . . : Tuesday, December 02, 2014 6:10:57 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 234887840
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1B-5C-59-07-00-1A-A0-2D-F4-0D
DNS Servers . . . . . . . . . . . : 66.119.96.9
70.158.128.9
192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{CC18CC2F-EC81-44AB-B600-E8916A02420C}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 11:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fb:30f1:403:3f57:fefd(Preferred)
Link-local IPv6 Address . . . . . : fe80::30f1:403:3f57:fefd%12(Preferred)
Default Gateway . . . . . . . . . : ::
NetBIOS over Tcpip. . . . . . . . : Disabled
I hope this helps. I guess I need to know exactly what settings I need to put in the workstation's DNS.
Capt. Dinosaur

Similar Messages

My wife and I have made many purchases over several years on seperate accounts, how could we join them into one account, without losing everything?

My wife and I have made many purchases over several years on seperate accounts, how could we join them into one account, without losing everything? We both use Iphone 5's and share an Imac at home.

Purchases using one Apple ID cannot be merged or transferred to another Apple ID. Purchases are forever tied to that Apple ID used. You have to decide which Apple you want to use for purchases and stick to that Apple ID so that you can share: Settings > iTunes & App Stores > Apple ID : > use the same Apple ID here to share purchases.

I can not join my Apple extreme with the Apple express. I shows a conflict in the network! I've tried everything. How can they join on the same network?

I can not join my Apple extreme with the Apple express. I shows a conflict in the network! I've tried everything. How can they join on the same network?

It says that my DHCP has to be changed! How? to what?
It is 802.11g.express. but is set to default by the computer (Macbook Air).
The other is 802.11n. (express)
Extreme is 802.11.g. Is the Main Airport.
It is on ethernet & wep 128 security.

How do I join multiple Contacts on my iPhone 5?

How do I join multiple Contacts that are exact or very similar on my iPhone 5? When I bought my iP5, I merged my contact from my android phone but almost all of my contacts were duplicated (I now have over 4k contacts) in this process. Any suggestions are appreciated.

The app My Contacts Backup Pro will identify and delete identical duplicate contacts.

How do i join multiple clips into a single movie?

I imported various video clips from my device into imovie 09. I have move all my selected parts of all the clips into my project pane. How do I join all these seperate clips in the project pane into one single movie, and then save it as such??

i have used the share menu to save the movie under quicktime. This brings two more questions:
1. Is there not a way join the clips into one movie and save it with iMovie, rather than having to share it with another application?
2. If I do share it with quicktime, can i delete the original clips from iMovie, or will that also delete the new movie in quicktime?

How do I join multiple (short) audio clips into one single long audio clip in Premiere Pro CS5?

Hello,
The question is in the title but I'm wondering how I can join multiple (short) audio clips into one single long audio clip in PP CS5.5. I put all my short clips right next to each other and selected all of them to see what options are available by right clicking and using the toolbar options at the top. The closest that I got was to nest the sequence, but that's not what I really want.
I'd like to merge all the short clips into one single (long) audio file to use under the video.
Thoughts are welcome and greatly appreciated.
Thanks,
-Melvin

O.K. This is kind of fundamental and you will need to learn up on this fully ...but for now...
Make sure you have the WAB ( work area bar )covering the length of the audio clips. ( You do not need to select them)
Go to the File Menu> Export Media
You will be given all the Export Options. Choose Wave File
Select option for Export Work Area.
Choose where to export the file to ( HD location)
follow your nose from there....
http://tv.adobe.com/watch/learn-premiere-pro-cs5/exporting-with-adobe-media-encoder/
BTW - Why are you taking the audio to Audition anyway? What are you going to do to it.

How to write join queries in Smartforms

how to write join queries in Smartforms pls give me sample

just as u write it in normal reports u can do the same in smartforms but it is suggested tht i u havve a custom print program do it thr and pass it thru interface
кu03B1ятu03B9к

Can you please help me by saying me how can i join two different picture to make it as one picture.??

Hi Sir/ Madam,
My name is Rishav and I am facing some problem with my Photoshop CC. Actually I have a question. If you guys could help me out i will be very obliged. The quest in "Can you please help me by saying me how can i join two different picture to make it as one picture.??"

Maybe you should post over at
Photoshop for Beginners
or start with the "Get Started" section of the Help:
Photoshop Help | Photoshop Help
And your question
Can you please help me by saying me how can i join two different picture to make it as one picture.??
does not seem particularly specific – do you want to simply combine two images as they are, do you want to clip elements from the one and insert them into the other, …?
Could you post (lores of) the images and explain what you intend to achieve?

I would like to know if I can "join CD tracks" once they are downloaded into a playlist in my ITunes folder on my computer and/or how do you "join CD tracks" if you are downloading from iTunes itself. I have two songs that I would like to "join" but I d

I would like to know if I can "join CD tracks" once they are downloaded into a playlist in my ITunes folder on my computer and/or how do you "join CD tracks" if you are downloading from iTunes itself. From the information through the "Help" menu, it seems you can only "join cd tracks" when you are in the process of downloading them from a CD onto your iTunes playlist?
.....any suggestions would help.
Thank You
DW

The help menu is correct.

How do I join text to shapes in pages?

how do I join text to shapes in Pages?

Just click inside the Shape and either type or paste.
or
select a Textbox and Shape by clicking on each with the command key held down > Menu > Arrange > Group
Peter

QUESTION: In Elements 12, how do I join together separate slideshows into a single integrated alideshow?

QUESTION: In Elements 12, how do I join together separate slideshows into a single integrated alideshow?

I hate to say this, but there is no way to put 1280X720 footage on a 1920X1080 sequence and upscale it to match the frame size without losing some quality. Basically, you are asking Premiere Pro to provide new pixels that were not in the original video. That is seldom a really good idea. You might want to try investing in program designed to upscale video. I have never used this, but there is a free trial, so give it a shot: http://www.infognition.com/VideoEnhancer/
Of course, it all depends on the content. Try it with Premiere Pro. Only you can judge. However, you might need to consider putting all of your 1920X1080 on a 1280X720 sequence instead, and just produce your video at that size.
Or, once again, this depends on the content, put some sort of frame around the smaller footage, either a blurred out version of the upscaled footage - lots of TV stations do this with 4:3 footage on a HD program, or purposefully make it even a little smaller, or crop it, and use parts of the same video in Picture-In-Picture. You have seen this before. A person talking on the phone in a larger frame to the left, and on the right a closeup of the mouth, or maybe a clip of the person they are talking to. Or use some B-Roll in the PiP.
Get imaginative, because you already know that you messed up, so perhaps make it look like you did it on purpose.

How do I join together arcs and lines in a single Shape???

I am out of my depth, I am probably missing something spectacular .... I need to construct a shape from arcs and lines to get something like this, only closed:
Like a winding river sort of thing... I do not need to draw this I need to have this shape and its area available to me.... How do I join these two arcs and two lines into a shape from which I can find - area.contains(xy.getX(), xy.getY()); , preatty please?
here is the code that causes numerous errors:
import java.awt.*;
import java.awt.Graphics.*;
import java.awt.Graphics2D.*;
import java.awt.geom.RectangularShape.*;
import java.awt.geom.Arc2D;
import java.awt.geom.Line2D;
import java.awt.geom.Rectangle2D;
import java.awt.geom.Area;
import java.awt.geom.GeneralPath;
class MyShapes //extends Arc2D
public static Arc2D outerOne;
public static Arc2D innerOne;
public static Line2D upLine, bottomLine;
public static Area area = new Area();
public MyShapes(double[] upper, double [] lower)
outerOne.setArc(upper[0], upper[1], upper[2], upper[3], upper[4], upper[5], (int)upper[6]);
//                         x,          y,               w,          h,               OA,      AA, int OPEN =1
innerOne.setArc(lower[0], lower[1], lower[2], lower[3], lower[4], lower[5], (int)lower[6]);
//outerTR=this.makeClosedShape(outerTopRightArc,middleTopRightArc);
upLine     = new Line2D.Double(outerOne.getX(),outerOne.getY(),innerOne.getX(),innerOne.getY());
bottomLine = new Line2D.Double(outerOne.getX()+outerOne.getWidth(),outerOne.getY()+outerOne.getHeight(),innerOne.getX()+innerOne.getWidth(),innerOne.getY()+innerOne.getHeight());
area = this.joinAll(outerOne,innerOne, upLine, bottomLine);
private Area joinAll(Arc2D out, Arc2D in, Line2D one, Line2D two)
GeneralPath joiner = new GeneralPath(out);
joiner.append(in, true);
joiner.append(one, true);
joiner.append(two, true);
Area temp = new Area(joiner);
return temp;
public boolean isInArea(Point xy)
return area.contains(xy.getX(), xy.getY());
public boolean isItClosed()
return area.isSingular();
Thanks

Glad to hear you find what was wrong. Still, it doesn't the main problem : why is that method crashing?
Here is what I've done in the mean time. See if it fits your purpose.import javax.swing.*;
import java.awt.*;
import java.awt.event.WindowAdapter;
import java.awt.event.WindowEvent;
import java.awt.geom.*;
public class MyShapes {
     private Arc2D outerOne;
     private Arc2D innerOne;
     private Shape line1;
     private Shape line2;
     public MyShapes(double[] upper, double[] lower) {
          outerOne = new Arc2D.Double(upper[0],
                                             upper[1],
                                             upper[2],
                                             upper[3],
                                             upper[4],
                                             upper[5],
                                             0);
          innerOne = new Arc2D.Double(lower[0],
                                             lower[1],
                                             lower[2],
                                             lower[3],
                                             lower[4],
                                             lower[5],
                                             0);
          line1 = new Line2D.Double(outerOne.getStartPoint().getX(),
                                          outerOne.getStartPoint().getY(),
                                          innerOne.getStartPoint().getX(),
                                          innerOne.getStartPoint().getY());
          line2 = new Line2D.Double(outerOne.getEndPoint().getX(),
                                          outerOne.getEndPoint().getY(),
                                          innerOne.getEndPoint().getX(),
                                          innerOne.getEndPoint().getY());
     public void paint(Graphics2D aGraphics2D) {
          aGraphics2D.draw(outerOne);
          aGraphics2D.draw(innerOne);
          aGraphics2D.draw(line1);
          aGraphics2D.draw(line2);
     public static void main(String[] args) {
          double [] XO= {56, 58, 400, 280, 90, 90};// outter arc
          double [] XI={114, 105, 300, 200, 90, 90}; // inner arc
          final MyShapes myShapes = new MyShapes(XO, XI);
          JPanel panel = new JPanel() {
               protected void paintComponent(Graphics g) {
                    super.paintComponent(g);
                    Graphics2D g2 = (Graphics2D)g;
                    myShapes.paint(g2);
          final JFrame frame = new JFrame("Test shape");
          frame.addWindowListener(new WindowAdapter() {
               public void windowClosing(WindowEvent e) {
                    System.exit(0);
          frame.setContentPane(panel);
          SwingUtilities.invokeLater(new Runnable() {
               public void run() {
                    frame.show();
}

HT204053 How do I join two Apple ID purchases into One?

How do I join two Apple ID purchases into One?

You can't, accounts can't be merged nor content transferred from one account to another account - content will remain tied to the account that downloaded it.

How to write Join View Adaptor which will pull data from Siebel and OID ?

Hi Experts,
I wanted to write web service call where OIF will talk to OVD than OVD will have join adaptor which will pull few data like msisdn from Siebel and view data from oid like given name and generate SAML assertion.
I wanted to know how to write join adaptor for the same
Help Appreciated.

Hi Experts,
Is anyone has any idea on webservice call to OIF which will call OVD that will have join adaptor connecting siebel and oid ?
any help is appreciated

How do I join up my small video clips?in simple terms please!

HOw do I join up my small video clips? In simple terms please!

You mean combine clips into a single clip?
You could try iMovie. https://itunes.apple.com/us/app/imovie/id377298193?mt=8

How Do I Join a Workstation to a Domain

Similar Messages

Maybe you are looking for