How do I join up my small video clips?in simple terms please!

HOw do I join up my small video clips? In simple terms please!

You mean combine clips into a single clip?
You could try iMovie. https://itunes.apple.com/us/app/imovie/id377298193?mt=8

Similar Messages

How can I join up my home videos in order to see them together rather than in short bursts? IN SIMPLE TERMS PLEASE.

How can I join up my home videos in order to see them together, rather than in short bursts? In simple terms please?!

You can research into the iMovie app and see what it'll do. I'm afraid I've never used it. But I know it does have a section on this forum so maybe someone there can answer your question.
The only other way I can think of would be to get your files off your iPad and onto a computer and then get a video editing program (there are several that are inexpensive) and use that to put them together.

Just got fcp, how do mute the sound on the video clip so it does not come through the audio track?

just got fcp, how do mute the sound on the video clip so it does not come through the audio track?
Please help

Don't edit the audio into the timeline. Or pull the audio level down to zero in the inspector or on the audio waveform in the timeline.

Hi, is there any option how I can edit duration of multiple video clips (not stills) in iMovie 11, lets say if I want them 2 seconds long? Many thanks for any advice... Tom

Hi, is there any option how I can edit duration of multiple video clips (not stills) in iMovie 11, lets say if I want them 2 seconds long? Many thanks for any advice... Tom

Yes.
iMovie 11 tutorials:
http://help.apple.com/imovie/
http://www.apple.com/ilife/tutorials/#imovie
and also these:
http://www.kenstone.net/fcp_homepage/imovie_09_stone.html
http://www.kenstone.net/fcp_homepage/imovie_09_stone.html#interface

How do I re-import an original video clip

How do I re-import an original video clip
I want to re-edit a particualr clip (68 secs) and I have cleard the old clip (13 secs). But each time I try to import the original clip it only imports the portion I previously edited ie. 13 seconds.
I have renamed the clip, tried to open it in a new project same thing - PREMIER PRO 5

please be more precise about exactly what actions you took...
by giving very detailed info on what you did (from the beginning, when you first imported "the clip" to Premiere) and what you want to do, you help people, who'd like to help youfinding a solution.
But they need to understand what exactly your problem is.

How to combine several small video clips of different size?

The first 4 segments I added were all the same size, as far as length and width. However, my last segment was slightly larger. My whole video clip now as big black areas when the smaller segments are play, and then when it gets to the 5th segment, it perfectly fills the QuickTime window. So how do I tell that 5th segment to reduce in size so that it matches the others? Does this make sense?
Thanks!

Open your file with QuickTime Pro and then open the Movie Properties window.
Highlight your "oversized" video track (single click on it) and then click the Visual Settings tab.
Reduce its dimensions to match your other video track sizes.
Save As to make a new self contained file.

How can I match sound quality between video clips and audio clips?

Hi guys,
First of all let me say that I enjoy using the latest Media Encoder. However, as a novice, I have two related problems.
1.I am recording video to use with PowerPoint slides in Adobe Captivate. I am encoding the video with best quality FLV. This produces very good video,
      but with a degraded audio track, even though I had filtered the audio in soundbooth. The post encoding sounds like it did before Soundbooth corrections.
2. Some of the video recording has been set cut into audio clips to be used as background narration behind PowerPoint. The logic behind this is: that if both are
      recorded at the same time, the voice quality should match.
This is far from the outcome. I have tried MP3 for the audio which of course produced the best sound- but is entirely unlike the rest of the video. I have also encoded the audio with Windows Waveform preset figuring that since the soundbooth edit was a .wav file, that there should be a reasonable match. Wrong again!
So, the audio quality of all clips is poor, and the difference between the encoded video clips, and the audio encoded clips spoils the otherwise professional result in Captivate.
Please help, all of you experts.

Thank you.
OS Windows 7 x 64; 3.2 MHz; 2 TB; 12 GB Ram-9GB ram allocated to Adobe.
My process is this:
1. The whole video and audio narration material is shot in one continuous video sesseion.
2. The microphone is only mono, but the camera is set to stereo. Noone can work out how to change the camera to mono.
3. In Premiere Pro 5, I select render and replace in SoundBooth.
4. In Soundbooth, I choose Add Multichannels.
5. In Multichannels, I delete the unwanted noisy channel, and any other unused channels.
6. With the remaining mono channel, I then select Export and Save As option, then Stereo.
7. Next I edit the stereo channels as needed.
8. The imported stereo won't automatically update in Premiere Pro, so in PPR I import the new edited stereo track.
9. I test this track in PPR, to check that it is playing R & L channels. It is. OK.
10 On the timeline, I proceed to cut apart this single stereo wavelength .
11.These clips are saved as Video, or Audio subclips.
12 From the video subclips, I export to Media Encoder, and choose either FLV4 match attributes (High Q). This I modify to custom 2 pass (Custom save).
     The summary says that this is saved to MP3 Stereo.
13. I import this into Captivate 5, but the Video outcome is Left channel only. I have tested this on Media Player/Real Player where it is also L channel only.
14. I export my Audio subclips to Media player, and select MP3 option and this summary also reports stereo. The Audio outcome is stereo, when played in any player and in Captivate 5.
I cannot understand how a single, continuous track edited uniformly in Soundbooth to stereo, can produce different outcomes in Media player.
I would so appreciate a solution to this problem, because, in the Captivate 5 e-learning production, the switch between stereo audio (behind PowerPoints), and l. channel video is distracting. Naturally, the l. channel only is a thin sound. It is as if it had never been edited in SoundBooth at all.

Need help on how to a user can control a video clip using their mouse

I need help. I've got a video clip of a rotating 3D
object(left to right) and i would like the user to be able to
control the rotation of the object using their mouse. I've looked
everywhere and i'm at a lost. Can anyone help me
Here is a link to what i'm trying to achieve:
http://www.sun.com/servers/blades/6000/gallery/index.xml?p=1&s=2
I know they use Java but i'm sure this can be done in Flash.
Thanks
Ray

Here are the instructions...
Update firmware with DOS CD
To boot from CD you have to hold down the option key (<alt>) during startup. A HDD icon and a CD should appear on the gray screen. The HDD has the volume name written below and the CD is named Windows. Select the CD and boot to DOS.
Hit <ESC> to skip the README.TXT
Use PG UP/DOWN keys on an external keyboard to scroll through the readme, using arrow keys may lock DOS.
SeaFlash offers some options you should explore before performing the update. If you just want to do it ASAP then hit <D>.
Hit <L> to list compatible drives and FW version. (Column New FW version should state SD24, hit <ESC> to go back to main menu.)
Hit to scan your drive(s). (Shows your model and FW, <ESC> for main menu)
Finally hit <D> to update your Momentus XT to SD24. (takes about 15s to update)
Power off your Mac.
-- Although it did made sense to what you are saying to just follow Seagate's instructions. But they only had instructions outside the realm of MS Windows is to burn it on a disk and run a cold boot to the disk drive. Otherwise if Seagate did provide detail instruction on how to install this then can you provide me a link?
Thanks again....

How to change the contrast of a video clip ?

Hi there,
I am embarassed to ask this basic & elementary question but it is driving me nuts finding it !
I want to adjust the contrast of the video clip that I imported.
When I went to the color board, it only have COLOR, SATURATION & EXPOSURE to be adjusted.
But where is the option to adjust CONTRAST located ?
Thanks & regards

Tom Wolsky wrote:
Open the video scopes and set it to waveform monitor. You adjust the contrast in the exposure board. Reduce the shadows to zero and the highlights to 100. Adjust the mids as you like.
Sorry Tom, my bad ... how do I open the video scope ?
When I click the video clip in the browser, what shows in the Video tab on the info panel are only:
1) Color - which upon clicking only have the option to tick & untick the "Balance: Not Alaysed" checkbox
2) Spatial Conform
Any ideas ?
Thanks

How to stop the jerking of my video clips? on Premiere Element 10

How do I stop the jerking of my video clips when I add effetcs ..to do not zoom in or out etc..smoothly.
Thank-you,
Claudette

Claudette,
When you started your Project, from the New Project screen, you were given some choices. If you do not recall what you chose, you can go to Edit>Projects Settings>General, and see what you chose. I do not think that location has moved in PrE 10, but if it has, someone will correct me.
Now, in very general circumstances, one should choose a Project Preset, that matches their Video Source Files 100%, or there can be issues.
However, if one ONLY has Still Images, and there is no Video being used, things differ a bit. In that instance, one would ask themselves a question, "how will I deliver my Video, created from those Still Images?" That answer might be a DVD-Video, a BD (Blu-ray Disc), a streaming Video files on a Web site, or as a file, that one sends to others. With a Stills Only Project, one would most likely choose a Project, that matches their delivery. If there are several delivery schemes used, then I would recommend choosing the one that is the highest resolution, and handling the others with Export/Share.
Now, within all Project Presets, there is a Frame Size, say 720 x 480 for an NTSC DV Project, designed to go to DVD-Video, or perhaps 1920 x 1080 for the production of a BD. Though PrE can Scale large Still Images to fit, it does not do the best job, and there is a major processing "hit," that can bring a computer to its knees. For those reasons, we recommend using a program, such as Photoshop, or Photoshop Elements, to do that Scaling, before one Imports the Still Images into the PrE Project. For SD (Standard Definition) DV, the "rule of thumb" is to Scale to 1000 x 750 pixels. For an HD Project, that same thinking would be 2000 x 1500 pixels. That gives one some "wiggle room." I will actually Scale to the exact pixel x pixel dimensions, unless I have a compelling reason to do otherwise - then, I will calculate the larger size, and Scale to exactly that.
How will you deliver your Project?
What are the specs. of the Project (using the method above)?
What are the pixel x pixel dimensions of your images? If they are random, then concentrate on the larger ones, please.
Good luck,
Hunt

How to set a quality of imported video clip

Hello folks,
I am trying to improve a quality of a video clip, which I
importing onto the stage from my desktop. When I reach compression
profile, maximum preset profile is DSL/Cable 786 kbps. Imported
clip is much worse quality than original. So I am wondering how can
I set a new custom compression profile to get better quality Flash
video on stage.
Thank you so much for any input or advise.
Cheers

Well yeh, you are compressing a video to be viewed for the
web, you always loose some quality due to bandwidth. you can also
use custom profiles by using the shipped flash video encoder which
comes with Flash 8 Professional or Flash CS3, both packages allow
you to change the bitrate of the video and much much more.

How can I stop iMovie Crashing on video clip import

I have only been using iMovie a short time period. Most recently it started to crash every time I tried to manually import a video clip. I've reported it to Apple several times over the past 48 hours. Sometimes I'm just getting ready to import a clip when it crashes. Very frustrating! Here I am a recent Windows convert but I'm about to return to windows just to produce movies (even Windows crashed, but much less). Any thoughts on how to solve this problem would be appreciated.

If you don't get an answer here, you may want to post in the iMovie discussion here.

Why is iphoto not allowing to send small video clip in email

Would it be an other way to send it , so far I havn't found a place beside iphoto to save pics & video tks

Select the video clip you want to send from iPhoto, then go to the File menu and choose Reveal in Finder > Original File. The movie file will be then shown in a Finder window. At this point, you can use the Share button in the Finder Toolbar to send the clip to a new Mail message, or you can control (right-)-click on the movie file and choose Share > Mail from the contextual menu which will also attach the clip to a new Mail message.

How do I convert Kodak Camera .mov video clips to Windows .wav files?

This morning I purchased Apple QuickTime Pro for ONE specific reason and this is so I can convert .mov video clips taken with Kodak cameras to Microsoft Windows .wav files. I have tried everything I can imagine so far with negative results.
I'm starting to think this may not be possible even though APPLE advertised this program as being capable of converting their .mov files to "LOTS" of the usual formats. IF Windows .wav is not a common format then what is?
If this is not possible with this program I am going to be one unhappy guy for having totally wasted $29.95 and will have a very bad opinion of Apple in my mind from now on.
DELL Dimension 8300 Windows XP Pro XP Media Edition

Open your Kodak file using QT Pro.
Open the Movie Properties window and "Extract" the audio track.
This will open in a new window. Choose "Export" and then Sound to WAV. Name and save the file.

How can I speed up loading of video clips in Elements 9.0?

Hi,
I upgraded from 7.0 to 8.0 and was unhappy with the product, so upgraded again to 9.0 (Elements and Premiere). Right now the problem is that it takes 20-25 seconds to load a short video clip, i.e. to play it.
I am running with an Intel Core 2 Duo CPU 2.20 Ghz/2.20+GHz with 3 GB of ram.
Any ideas?
Thanks!

As a practical example it originally took 3 min to load a 1 hour 29 minute wedding & reception I shot in ACVHD 1080x1900. This was using one disk for all PE9 functions.
I defraged my drives and arranged the program and pagefile on one disk (C:), the project on another and recaptured the media onto the third drive
The same project then took 1 minute to load or if I do it seperately, 20 seconds loading the program and 40 seconds the media
I can move up and down the full length of the long timeline quite quickly.
I have 2.4g core duo and 2mb ram
This is discussed to in many posts in this forum
So you know what to do!

How do I join up my small video clips?in simple terms please!

Similar Messages

Maybe you are looking for