How do I justify text at the end of a column

How do I justify text at the end of a column In Pages?
Also, is there any way to sort a document (alphabetically by the first word of each paragraph) that is not in a table?

RTPLaw writes:
How do I justify text at
the end of a column In
P    a    g    e    s     ?
Also, is there any way
to   sort a document
(alphabetically by the
first   word   of   each
paragraph) that is not
in         a         table?
No. Like Peter and Walt, I wonder why you'd want to, considering the appearance of such manipulation, illustrated above. Is this a requirement for some specific type of document?
Regarding your second question, there's no way to do this using Pages as it comes out-of-the-box (or in the downloaded edition). But you can sort the paragraphs of a document alphabetically using WordService, freeware from Devon Technologies. The link will take you to their download page. Scroll down to the Freeware section and the download link for WordService.
Regards,
Barry

Similar Messages

How to Print Sales header text at the end of last page of Main Window

Dear All,
I have a requirement to print Sales order header text at the end of Main of last page. I don't have footer window.When i use Bottom-End bottom.Only one line is printing.The header has 5 lines.
Request you to provide <b>code</b>to handle this situation. Your response is highly appreciated
Best Regards
Praveen

Hi,
If u r using standard layout set RVORDER01.
U can print that sales order header text in the following text element.
/E SUPPLEMENT_TEXT.
U can include ur text objects here.
Then it gets printed.
Regards,
Veda Kumar

How to Right Justify text on Ipod

My ipod has been through some wear and tear, long story short, the screen is "cracked" so to speak down the middle and from the middle of the screen to the left side i cannot see anything. I'm trying to figure out how to right justify all of the text so that i can actually use my ipod and search songs

You can't change the layout of any part of the iPod OS. Sorry. You might want to consider getting the screen replaced. There are lots of third party repair outfits that charge less than Apple to so the job.

How Do I Wrap Text Like the iOS Camera App?

Hello. I am in yearbook, and I have been challenged with designing the cover of the yearbook, and I have been having a few problems along the way. One of these problems is to wrap text. Specifically, I'm stuck on how I would wrap text like the iOS camera app on the bottom of the screen. The words seem like they are wrap around a 3D object to give it that effect, but I can't really tell. If anyone can help me, it would be greatly appreciated.

JJMack wrote:
There is a big difference between being a casual user than real work or development. I own a iPod its a great MP3 player and a device I can display my pictures on out of my pocket. I'll even Facetime my kids at time to see my grand kids or help fix something. My wife has a mini iPad for quick internet access and quire music and uses her iPod to entertain our two year old grandson with games. She uses a Canon 1D mark 4 and I a Cannon 1D mark II. The only use the iPad and iPod cameras get is Facetime. No iOS apps are use to work on images they have no value when you have Photoshop. The iPod is better for displaying image then the iPad mini it has a 3:2 aspect ratio display and travels better the the mini iPad which has a 4:3 aspect ratio display. I also crop image for display on wall mounted HDTV. The iPad is better for casual internet access then the iPod. All our kids have iPhones and they all use computers either Mac or PC for work and internet access. When you have a Unix or Windows why would you want to touch an iOS device for work or serious internet access. Apple mobile devices are convenient for casual use and grand kids don't get that dirty finger painting on them as they do using real paint. Nothing of real value is maintained on an iOS device.
Well...there's Photoshop Touch and Photoshop Mix as well as Lightroom Mobile. It could be argued that they're don't exactly mirror their desktop cousins, yes, but they weren't meant to be. They were meant as extensions to the desktop experience. (e.g., Lightroom Mobile lets one work with the RAW images they have in their Lightroom desktop collections.)
The more powerful Windows tablets can run Photoshop desktop (like Photoshop CC) too.
@bluebocat: Are you looking for text with a perspective? Like it has a vanishing point? As if it was turned in a certain direction in 3D space?

How to rotate a text in the adobe reader for mobile ios ?

how to rotate a text in the adobe reader for mobile ios ?

There's no rotate command to rotate the document. Instead, rotate the iPad. If it doesn't rotate, turn off the Rotation Lock switch on the side of your iPad.

How to attach a text in the center of the Ellipse using JXML ?

How to attach a text in the center of the Ellipse using JXML ? Can we use labelFor="$topEllipse" ?
<StackPane fx:controller="myfxml.ArchiveLogsController" id="Login" xmlns:fx="http://javafx.com/fxml">
<children>
<AnchorPane>

<maxWidth><Double fx:value="-Infinity"/></maxWidth>
<maxHeight><Double fx:value="-Infinity"/></maxHeight>
<children>
<Ellipse fx:id="topEllipse" centerX="100" centerY="100" radiusX="50" radiusY="10" strokeWidth="2" stroke="#FF0000" style="-fx-fill: linear-gradient(to right, white 0%, red 100%);"/>
*<Label fx:id="ArchLogs_lb" text="My Ellipse Label" />*
</children>
<properties>
<backgroundColor>
<Color blue="1.0" green="1.0" red="1.0" />
</backgroundColor>
<elementLockSel>
<Boolean fx:value="true" />
</elementLockSel>
</properties>
</AnchorPane>
</children>
</StackPane>

I'd suggest putting the Ellipse and the Label in a StackPane.
I wonder why so many people call it JXML?
It is so strange - I guess the JXML name just seems more natural to some people, though I don't know why.
I think Greg is right and that labelFor is not what you want:
http://docs.oracle.com/javafx/2.0/api/javafx/scene/control/Label.html
"Labels also are useful in that they can have mnemonics which, if used, will send focus to the Control listed as the target of the labelFor property . . . A Label can act as a label for a different Control or Node. This is used for Mnemonics and Accelerator parsing. This allows setting of the target Node."

How to draw horizontal line at the end of table for multiple line items

Dear Experts,
                   Pls can anyone help me how to draw horizontal line at the end of table for multiple line items . kindly help me regarding this
Thanks
Ramesh Manoharan

Hi
   I tried as per your logic but it is not solving my problem . when i am gone to table painter it is showing line type 1 and line type 2
is below format.. if u see here line type 1 bottom line and line type 2 top line both are same.. so how to avoid this ?
                          line type 1
                         line type 2

How do i put text in the picture

how do i put text in the picture ?

In addition to the apps already mentioned here are some that can add text to a photo:
Some Image Editors That Support layers:
Photoshop Elements 11 for Mac - $79
GraphicConverter - $40
Rainbow Painter - $30
Imagerie - $38
Acorn - $50
Pixelmator - $60
Seashore - Free
GIMP for Mac - Free
Xee 2.1 - free

How can i highlight text in the Adobe Difital Editions?

How can i highlight text in the Adobe Difital Editions?

You have to remember that Digital Editions was never designed to have 'text
editor' capabilities. BTW: Bluefire and Overdrive also have such
limitations. Put in another frame of reference, DE presents you with the
ebook, as you would be presented with a physical printed book.
==============

How does one put text on the spine?

I'm a little confused about the difference between the version I'm creating and the template I start with. I start with a template, then resize and mess with the arrangement of the pictures. I move text boxes. All seems okay.
I put a colored background on the front and back cover (by inserting a specially made pdf from Pages, a gradient color). The back spine remains white, and blank. How can I add text to the spine? And is there a way to have the color from the background bleed over the spine?
Ben

I certainly don't know how it was constructed, but I suppose the form was intended for people that use Word. If you were using Word, you would just select the "insert" key (or something - I forget) and type away. The text would type above the line. I thought maybe there was something like that in Pages. I find myself getting very frustrated using Pages and Numbers. They really aren't that easy to use. Word and Excel have them beat.

How to sending simple text in the mail body

Hi friends,
             How to send simple text in the mail body through ABAP code
   plz send me the related code and setting for that mail.
Thanks&Regards,
Srinivas

try this...
FORM send_file_as_email_attachment .
DATA: objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: reclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE.
DATA: objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA : i_body TYPE soli_tab WITH HEADER LINE.
DATA: it_attach LIKE it_display1 OCCURS 0 WITH HEADER LINE.
DATA: doc_chng LIKE sodocchgi1.
DATA: tab_lines LIKE sy-tabix.
DATA: att_lines TYPE i.
DATA: lv_lines TYPE i.
DATA: file TYPE string.
data: g_datum like sy-datum.
data: g_datum1(10) type c.
DATA: len TYPE n.
LOOP AT it_email.
    CLEAR : objpack,
            objhead,
            objbin,
            objtxt,
            reclist.
    REFRESH: objpack,
             objhead,
             objbin,
             objtxt,
             reclist.
    g_datum =     sy-datum - 1.
    concatenate g_datum6(2) '.' g_datum4(2) '.' g_datum+0(4) into
    g_datum1.
doc_chng-obj_descr = 'Aged Stock more than 45 Days'.
    CONCATENATE 'Aged Stock more than 45 Days' '-' it_email-vkbur INTO
    doc_chng-obj_descr.
    CONCATENATE 'Please find enclosed Aged Stock Details ( >45days ) report as on'
    g_datum1
    INTO objtxt-line SEPARATED BY space.
    APPEND objtxt.
    objtxt-line = ' '.
    APPEND objtxt.
    objtxt-line = 'Regards'.
    APPEND objtxt.
    objtxt-line = 'LIS SAP Projects'.
    APPEND objtxt.
    objtxt-line =
    'PS: Pls send feedback for futher improvements to SAP office.'.
    APPEND objtxt.
    DESCRIBE TABLE objtxt LINES tab_lines.
    READ TABLE objtxt INDEX tab_lines.
    doc_chng-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
   CLEAR objpack-transf_bin.
    objpack-head_start = 1.
    objpack-head_num = 1.
    objpack-body_start = 1.
    objpack-body_num = tab_lines.
    objpack-doc_type = 'TXT'.
   objpack-obj_name = 'Run_prog'.
   objpack-obj_descr = 'Agestock.txt'.
   lv_lines = tab_lines.
    APPEND objpack.
*CONCATENATE 'Plant'   'Material Number' 'Qty(More than 45days)'
*'Amount' INTO
       it_display SEPARATED BY space.
       append objbin.
       clear: objbin.
    CLEAR:it_display2.
    REFRESH it_display2.
    it_display2-werks = 'Plant|'.
    it_display2-matnr = 'Material Number'.
    it_display2-qty = '|Qty > 45 days'.
    it_display2-amount = '      |Amount'.
    APPEND it_display2.
    it_display2-werks = ''.
    it_display2-matnr = ''.
    it_display2-qty = ''.
    it_display2-amount = ''.
    APPEND it_display2.
    CLEAR : it_display2.
    sort it_display1 by amount descending.
    LOOP AT it_display1 WHERE werks = it_email-vkbur.
     AT FIRST.
*CONCATENATE 'Plant    '   'Material Number' 'Qty(More than 45days)'
*'Amount' INTO
       objbin-line SEPARATED BY space.
       append objbin.
       clear: objbin.
     ENDAT.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
        EXPORTING
          input = it_display1-matnr
        IMPORTING
          output = it_display1-matnr.
      it_display1-qty = TRUNC( it_display1-qty ).
      MOVE-CORRESPONDING it_display1 TO it_display2.
      APPEND it_display2.
      CLEAR:it_display1,it_display2,objbin.
      CLEAR:it_display1.
    ENDLOOP.
    objbin[] = it_display2[].
    DESCRIBE TABLE objbin LINES tab_lines.
    objhead = 'Suug'.
    APPEND objhead.
    objpack-transf_bin = 'X'.
    objpack-head_start = 3.
    objpack-head_num = 1.
    objpack-body_start = 1.
    objpack-body_num = tab_lines.
    objpack-doc_type = 'RAW'.
    objpack-obj_name = 'Run_prog'.
    objpack-obj_descr = 'Agestock.txt'.
    APPEND objpack.
    reclist-receiver = '[email protected]'.
    reclist-rec_type = 'U'.
    APPEND reclist.
=====================================================================
    CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
      EXPORTING
        document_data              = doc_chng
        commit_work                = 'X'
      TABLES
        packing_list               = objpack
        object_header              = objhead
        contents_bin               = objbin
        contents_txt               = objtxt
        receivers                  = reclist
      EXCEPTIONS
        too_many_receivers         = 1
        document_not_sent          = 2
        operation_no_authorization = 4
        OTHERS                     = 99.
    CLEAR : it_email.
ENDLOOP.
ENDFORM.                    "send_mail
Message was edited by:
        Sugumar Ganesan

How to Including custom text in the step "User Decision"

Hi All
Please help me in this regards I got problem
How to Including custom text in the step "User Decision"
Regards
Poonam
Edited by: Julius Bussche on Feb 2, 2009 1:59 PM
Please use the corect forum, meaningfull subject titles and use the search before asking questions

Hi Poonam,
If I understood your problem correctly...
When you create a user decision a screen will appear.
In the decision tab under Title you can give your custom text.
Even if you want to give some variable (value of which will be determined at runtime) you can give that as well.
Like you have created a container for BOR objects MAT_DETAIL, in that object there is a field MATERIAL.
You can define your custom text as below:
Title: Would you like to create new material or display material &
Parameter 1: &MAT_DETAIL.MATERIAL&;
In Title you can give as max. as 4 &(ampersand). And each & will be replaced by each Parameter at runtime in same sequence.
In parameters you use to select the container defined by you earlier.
Hope this will help.

How to add a total at the end of a characteristic column

Hi All,
There is a report where sales document number(0doc_number)is displayed in one of the columns,
now There is a requirement where I need to add a total count of those doc numbers at the end of that column.
I am not able to find a suitable way to do that.
I tried exception aggregation for taking a count of doc numbers but that will be another column then while I need the total at the end of the same
column which already exists.
Please assist.
Thanks,
Dolly

Hi Suman,
A part of the report is :
I need a count as 2 in above example at the bottom of sales document column.
Dolly

How to add a string at the End of TLFTextField without loosing current text format!

I have a TLFTextField that loads text from external text file.
Then a function changes the format of some parts.
Then as soon as I add a string at the end of my TLFTextField, All previous formatting is lost!
I use this code to add string:
myTLF.text += "." ;
or
myTLFText.text = myTLFText.text.concat(".");
Should I use another method??

pass the text through your formatting function again, or try appendText:
myTLF.appendText(".") ;

How to get consecutive numbering at the end of paragraphs?

In a big text some paragraphs, already styled, need a consecutive numbering.
At the beginning of the paragraph the numbering will create a mess.
Tried with fake footnotes: Impossible. The text has footnotes and converting the faked ones to text is not available.
Tried a nice script written by Jong to add/subtract a number on numbered items, but it is restricted to index situations.
O R I G I N A L                                   R E Q U I R E D
a. Many years ago.                    a. Many years ago. [1]
Lucy Smith                              Lucy Smith
b. Margaret run away.               b. Margaret run away. [2]

Hi, Camilo:
First of all, I was not thinking clearly when I blamed ID for a cross-reference bug. It was my error. Cross-references within a document need to be updated by the author, using the Update cross-references button at the bottom of the Hyperlinks & Cross-References panel, when they're moved or their source content changes. I was thinking about the known issues with cross-references that go between ID document files, which update automatically - performance slows, and sometimes they cause crashes.
Here's the replacement reply for my previous post #1:
camilo umaña wrote:
In a big text some paragraphs, already styled, need a consecutive numbering.
At the beginning of the paragraph the numbering will create a mess.
Tried with fake footnotes: Impossible. The text has footnotes and converting the faked ones to text is not available.
Tried a nice script written by Jong to add/subtract a number on numbered items, but it is restricted to index situations.
O R I G I N A L                                   R E Q U I R E D
a. Many years ago.                    a. Many years ago. [1]
Lucy Smith                              Lucy Smith
b. Margaret run away.               b. Margaret run away. [2]
It's not clear if the right-hand numbers are supposed to replace the left-hand numbers while keeping the same sequence, or if you want to retain the left-hand numbers. You can use cross-references to create right-hand numbers from the paragraphs auto-numbers.
Insert a cross-reference to the paragraph at the end of the text, with a format that captures its autonumber, and adds any ornamentation, like the square brackets in your example.
If the rightmost number must be positioned at the right margin of the numbered paragraph, no matter how long or short it is, or if it wraps around to new lines, add a right-aligned tab stop to the paragraph style, positioned at the location where you want the number to appear, and insert a tab character in the paragraph before the cross-reference.
If the left hand numbers are supposed to go away, you can't change the paragraph style to a non-autonumbered style, because you need the numbers that the cross-references capture. So, you need to create a character style that's very small and uses Paper for the text color, to hide the autonumbers. If the smallest point size (IIRC, it's 2 points) leaves too much space at the left of the autonumber, you might be able to reduce it further by using a small value in the Horizontal Scale property of the Advanced Character Formats in the Character Style dialog box. Your example seems to show that the numbered paragraphs are indented, so the space occupied by the hidden autonumbers may not be a problem.
If the paragraphs are rearranged in sequence, you'll need to use the Update Cross-References button at the bottom of the Hyperlinks & Cross-References panel to update the affected cross-references.
I'm still not clear about numbers at the end of the paragraphs in square brackets. Are they supposed to be the same value as the auto-number at the beginning of the paragraph, except that they use a numeric display format instead of an alphabetic format?
I don't know of any code that can work with a find/replace action that can capture a paragraph's autonumber and display it at a specific location. As you've seen, cross-references need to be inserted manually. You might post a query in the InDesign scripting forum to see if someone has figured this out. If there's no complete solution, you might want to ask about a script that searches for the ends of paragraphs of the autonumbered paragraph style and opens the Insert Cross-Reference dialog box.
Using Quick Apply to execute the Insert Cross-References command, which opens the New Cross-References dialog box, might save some energy for doing the many manual cross-references insertions. Search Google for terms like "InDesign quick apply" without quotes. You can open Quick Apply with a keystroke shortcut - Cmd+Return on Mac. You can type abbreviated commands. I use "rt cr" without quotes for (Inse)rt cr(oss-reference). Opening Quick Apply repeats the last command that was entered.
Also, if you haven't tried a Google search for phrases like "InDesign numbered list at right end of paragraph," without quotes, give it a try. There are lots of links, including one to this forum article. Perhaps there's a golden nugget among them.
If you think it's important for ID to be able to place autonumbers at the ends of paragraphs, please post a formal feature request here: Wishform Eventually, some user originated feature requests are incorporated in future ID releases.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

How do I justify text at the end of a column

Similar Messages

Maybe you are looking for