How do I keep a clip on my camera that I just imported in to iMovie??

When I import a clip from my video camera, how do I keep that clip on my camera still?  I have the latest version of Imovie and everytime I import a clip off teh camera it removes it from teh camera.  In the previous version of Imovie I had the option of keeping that clip on the camera but I can't find that option now????

a question for the iPhone forum?
LN

Similar Messages

  • How do I keep my clipping path from shifting positions when I crop an image? [was: Question]

    How do I keep my clipping path from shifting postitions when I crop an image?

    The work path will remain positioned relative to the same underlying pixels after a crop.  Are you trying to position it relative to one or more image edges after cropping?  I don't think you can do that without moving the workpath after the crop.

  • How can i download an app from iTunes store, that exists just in a "swiss store". Because my account isn't allowed to download apps from other stores than a slovene. ???

    how can i download an app from iTunes store, that exists just in a "swiss store". Because my account isn't allowed to download apps from other stores than a slovene. ???

    You have to be in a country, and have a billing address in that country, to download from its store. You can try requesting that the app be added to the Slovenia store, but unless the app's developer/rights-holder agrees to it then Apple won't be able to sell it there : http://www.apple.com/feedback/itunes.html

  • My iphone 5s was stolen and i gps d it and found where it was but they turned it off and denied it and i googled how to open iphone 5s without passcode and a youtube video showed how, so now i am out of a phone that i just paid 300 dollars for becaus

    my iphone 5s was stolen and i gps d it and found where it was but they turned it off and denied it and i googled how to open iphone 5s without passcode and a youtube video showed how, so now i am out of a phone that i just paid 300 dollars for because i dropped my last 5s and the glass shattered and i didnt have any insurance. so now it seems like i am out again. i was sold on the fact that the fingerprint sensor would stop that from happening but they can just reset the phone and have it as theirs new. is there anything i can do to get my phone back.

    If you set up your phone correctly, it is still protected by the Activation Lock and can be used without knowing your AppleID and password.
    Here are some more things about that:
    What if your iOS device is off or offline?
    If your missing device is off or offline, you can still put it in Lost Mode, lock it, or remotely erase it. The next time your device is online, these actions will take effect. If you remove the device from your account while it's offline, any pending actions for the device will be cancelled.
    How do you turn off or cancel Lost Mode?
    You can turn off Lost Mode by entering the passcode on your device. You can also turn off Lost Mode on iCloud.com or from the Find My iPhone app.
    copied from If your iPhone, iPad, or iPod touch is lost or stolen

  • How do I keep all my documents in iBooks that were purchased from on line store not at the iTunes Store. (Ver 7 has screwed up iBooks and it no longer works)

    I have hundreds of 3rd party purchased lists and legal documents I keep in Ibooks. Since upgrading to version
    7 iBooks only opens for a few seconds then closes any open document and kicks me all the way out of iBooks
    How do I keep these and reload ibooks ? I am 500 miles from my main PC and need thee forms now.

    The iPad is not new. It is almost 2 yrs old. Many of the documents are legal documents, legal journals text books etc that have a 30 day limit on downloads and that time period has expired. Your post suggested closing all applications and forcing a power down. That I have done several times. I have not restored the software as that would require deleting the contents. Not all the files are backed up and the ones that are, reside on my personal laptop that is states away and will be for at least a week and I need the data now.

  • I imported a slide on my old mac book pro to my iTune i had on it, but it got a new one how can i get my old iTune  back with that slide i imported

    imported a slide on my old mac book pro to my iTune i had on it, but it got a new one how can i get my old iTune  back with that slide i imported

    If this is a question about syncing with iTunes, you might want to post it over in the iTunes forum.

  • How do i get rid of 20,000 emails that have just downloaded onto my new 5s

    hi can anyone tell me how to get rid of 20,000 emails that have just downloaded onto my new 5s
    thanks

    Once in a while your e-m provider will make changes and you will get a large dump like that.
    I recommend using your web-based e-m to quickly delete them.

  • My iPhoto keeps saying it has found photos that weren't imported?

    Okay I just bought an Macbook Pro and im still learning the ins and outs of it. My iphoto keeps telling me i have "11 photos have been found in the iPhoto library that were not imported." and ask me "Would you like to import them?" I click NO then it stores it in a Recovery folder. The thing about that is every time I open iPhoto it always says the same thing. and keeps creating new recovered folders for these unknown photos. I really don't care what photos they are any more because I can't seem to find them, so is there a process that will stop this from happening? Can someone please help me?

    Right click on the show package contents, find a folder named import (or importing) and drag it to the desktop. Do NOT make any other changes. Aunch iHoto and you will be fine. Open the folder on the desktop and if there are any photos you want in it. If there are are import them to iPhoto. Then delete the folder
    LN

  • How do I keep .mov clips from being squashed when imported into iMovie HD6?

    Hi there! First time poster... Hoping someone can help me out with this:
    I've stupidly shot some footage with my digital camera sideways, portrait-style. I used QuickTime Pro 7 to rotate the footage clockwise, preserving the aspect ratio, so now the .mov clips are 480x640 pixels (so 3:4, instead of the standard 4:3).
    When I import the clips into iMovie HD 6, the footage gets squashed to fit the 4:3 screen, making everyone look shorter and fatter. The Help file advises that iMovie "automatically adjusts incoming footage to fit the screen size (aspect ratio) of your project".
    Is there some way I can opt out of this automatic adjustment? I'd prefer to have black bands on the sides of the screen than squashed video!
    Thanks for any help you can give. Cheers!

    You'll need to make an all black 640X480 image file and add it to your video.
    Adjust its layer so it is in the background and then reduce the dimensions of your video so it fits over it.
    Bring this new file into iMovie.

  • TS1702 How do I keep the iPad from installing apps that are on my Mac?

    I have an iMac and an iPhone 5. My wife has an iPad and an iPhone 4S. We each use different apps. However, we notice that occassionally the iPad will install the apps I have on my iMac. How can I stop this from happening?

    You can select the exact content that you want to sync each and every time that you sync if you want to do so. You can also turn off auto sync so that iTunes does not automatically sync without you having the opportunity to select what you want.
    Connect the iPad (or the iPhone) to the Mac and launch iTunes.
    Click on the iPad name on the left side under devices.
    Click on the Apps Tab on the right.
    Only click on apps that you want to sync. Uncheck the apps that you do not want to sync.
    Click on the Sync Apps Heading.
    Click on Apply in the lower right corner of iTunes
    iOS: Syncing with iTunes
    You can turn off auto sync by launching iTunes and go to iTunes>Preferences>Devices>Prevent iPods, iPhones and iPads from automatically syncing. Click OK. Quit iTunes.
    Read this for more information.
    http://osxdaily.com/2012/05/01/disable-automatic-syncing-itunes/
    It is recommended that most users not keep auto syncing turned off all of the time so that you do not forget to backup your device. I do not subscribe to that belief myself. Besides I have seen way too many users that claim to sync with iTunes or that use iCloud and they don't have a clue about what a backup is, where they can find it or what to do with it - if they even have one. Too many users get caught in the "This device has not been backed up with iCloud for three weeks message" because they don't have the sense to backup on a regular basis.
    But I digress .... Sorry.

  • How do I keep Notes out of my inbox?  I just want them on the iPhone Notes

    and on the computer under On My Mac.

    Go to Mail -> Preferences, click Accounts, then Mailbox Behaviors. For each one of your accounts (if you have more than one), uncheck *Show notes in Inbox*.

  • How do I install Windows Vista in my R500 that I just put a new hard drive into?

    I was given an R500 that had the hard drive removed by the previous owner for security reasons. I bought a charger and a new hard drive and intended to install Windows Vista that I bought a while ago and never used. I charged up the battery. The battery is good. I installed the hard drive. I'm pretty sure I got that right. Then I turned on the laptop. I expected to see a menu giving me some hint as to what to do next but all I see is ThinkPad in big white letters and underneath "To interrupt normal startup, press the blue ThinkVantage button." I stared at the screen for a while and then pushed the blue ThinkVantage button. Nothing happened. I opened the disc drive and put in the installation disk thinking that should bring up a menu. It didn't. Nothing happened.
    I'm reasonably experienced with computers and have installed hardware and operating systems before but this has my stymied.
    Anybody have any idea about how this is supposed to work?

    Actually, I tried that and nothing worked. Couldn't get past the opening screen. Fortunately, I have several other Thinkpads of various models that I got for a few bucks each (without hard drives) from a business that was replacing all their laptops. I pulled the hard drive out and put it in another R500 and, after a few fits and starts, got Vista up and running and then found out that the touchpad was flakey and the mouse pointer would freeze. All the USB ports were broken so I couldn't use my wireless mouse. Out came the hard drive and my next try was in an R61. Funny thing. Vista opened right up but there's no touchpad on the R61. (You can tell I'm new to Thinkpads.) Took me a few minutes of scratching my head and googling to figure out that the red button moves the mouse pointer on the screen. Now I have one good one so far and I'll see how many of the others I can make work.
    Thanks for your help.

  • How can I improve the quality of a photo that appears blurry when used in iMovie but not in iPhoto?

    A 320 x 240, 35 KB Jpeg file looks crisp and in focus in iPhoto.  But as soon as I put it into iMovie and hit full screen, it's blurry and looks terrible.  A photo taken with my Nikon D7100, a 3872 x 2582, 2.5 MB Jpeg photo translates to the big screen just fine, with perfect clarity.  How can I use this former picture but increase its clarity when it's magnified in iMovie?

    Apologies for opening this up again:
    I rasterised and embedded the photos, liked what I saw and marked the question as answered, then I zoomed out and lo! The white jaggedy edges are back! This is despite the fact I rotated them to vertical before rasterising them.
    It appears that the pixels in the rasterised image are relative to the screen, not relative to the object... so when I rotate the photo it goes back to the original hi-res photo and re-rasterises it to fit the new orientation.
    Also doing this has not lowered the filesize at all... It does appear that when you rasterise an image in Illustrator, the new raster is only a veneer, the original (hi-res photo) is still lurking in the background.

  • How do i uninstall all of the trial apps that have been imported into Lightroom 5?

    This is a screen shot from the pull down you'd get if you right clicked on the image in Lightroom 5. I'd like to uninstall all of those listed except the Exposure apps.

    Okay - but after that..
    I followed the instruction in the tutorial and did the following:
    Click Import (Existing Files)
    Select source - (pictures appear in grid)
    include sub-folders if appropriate
    Select “add”
    File Handling - Changed build preview to standard
    Apply During Import - Nothing added
    Add keywords - Added keywords
    Import (Tutorial says to click “Import” but import is greyed out and not available)
    What am I missing? The destination information does not appear. I tried selecting that before I clicked "Import" but that didn't help..

  • I accidentally imported and deleted my pictures and videos to my iphone. How can i send back my pictures and videos that i accidentally imported? please reply thanks

    my iphone has no sim so that i cant connect to the internet.

    Import them just like you would any other photos, via iTunes.
    You have to connect to iTunes, and sync via the photos tab.
    This will create a new album, so it won't add ot the camera roll but be in the photos app.
    Without a sim card you can still connect to wifi, so you do have internet access if you can get wifi accesss.

Maybe you are looking for

  • Crystal Report Viewing Problem in SAP b1 2007

    Hi , I have Installed Crystal Report Add On for 2007 SAP B1 but while display report i have getting following error, Any one can tell me what i have to do,please resolved my issue could not load file or assembly 'CrystalDecisions.Windows.Forms,Versio

  • Using jar file in other pc

    can the jar file being used in a pc that not installed with jdk?what i need to do to make the jar file to work in a pc that not installed with jdk?

  • Remove one logo & some text in pdf page

    Hi, i want to remove one logo & some text in pdf page, so i have used stamp tool & done it. my problem is after saving output pdf file size is very high. so pls tell me after editing how to save in pdf format & less file size.(without loosing image q

  • Automatic PO output Determination do not get trigger for SRM Classic impl

    Hello, We have implemented SRM 7.0 classic scenarios. We have set up system in such a way that whatever user put in Preferred Supplier at Shopping cart while saving the shopping cart we convert it to Supplier partner type and once approved create PO

  • Terminate 3th party application

    Hi Forum, I use a third party application (C+, no source) and a labview application in my test setup. Sometimes this C program does not work well. In this case the Labview application terminates and restarts it. In 99% of the cases it works well as a