How do I keep an image constrained in one size, and not become enlarged?

I would like to disable the feature where images on iweb will expand when clicked on.
I had thought I edited the photos to keep them one size- 300 x 300 px. After I added them to a web page on iweb, I used the site inspector, and tried to put the information and constrain the size .
I could only adjust the width, as the height was in grey, and unable to be adjusted. The box for constrain proportions was also in grey, and was unable to pick that.
I tried using different images, but was unable to adjust this.

To change the size of the thumbnails in a photo page use the Setting pane and increase or decrease the spacing between images:
Click to view full size
If you add 300 pixel x 300 pixel photos into a photo page then the large size image that comes up when you click on a thumbnail will be 300 x 300. Is that what you want? You don't need to reduce the size of the image to get a specific thumbnail size. You just need to adjust the spacing between them as described above.
OT

Similar Messages

  • How do I keep my status bar at the top and not moving from side to side and bottom of phone

    how do I keep my status bar at the top of my phone? I let my grandsn play a game on my phone and after he gave it back I noticed my status bar would move from the top to the side or bottom etc

    Reset, hold both home and power buttons until the iPhone begins to restart itself, ignore the slide to power off slider. Let the iPhone restart itself. Usually takes about 10 seconds of holding both buttons.
    Probably do not need this, but Portrait Lock can be set by, pressing home button twice quickly, slide bottom row of icons to the right one time, tap the Portrait Lock icon.

  • How can I keep the cookie history for one website while not allowing it for others?

    My privacy setting is set to clear history, cookies, etc whenever I close out of Firefox. As a result, one website I use frequently re-asks security questions after I log-in even though I tell it that it should remember and recognize my private computer. According to the web tech support, it is because my cookies are being deleted. She said in Windows Vista, she found a way around that. I have Windows 7, but have not figured it out yet.
    I would like to be able to specify which websites I want to be able to keep cookies for my computer. How do I do that?

    Let all cookies expire when you close Firefox.
    * Tools > Options > Privacy > Cookies: "Keep until": "I close Firefox"
    Make an Allow exception for the ones that you want to keep.
    * Tools > Options > Privacy > Cookies: "Exceptions"
    You can inspect and modify the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
    Tools > Options > Privacy > Firefox will: "Use custom settings for history"

  • How do I delete a column for just one table and not all the others?

    I have multiple tabels in a Pages document. I want to delete some columns on some of the tables but keep them on the other tables. When I delete the columns it deletes all of them on all of the tabels and I dont want that.

    No. To do what you are asking for would require a separate table on each page.
    Of course you can always move blocks of cells around manually, but I can't imagine how you would manage that.
    Jerry

  • Adobe Premiere Elements 11 - HOW DO I KEEP THE IMAGE QUALITY WHEN I RENDER?

    I'm using Adobe Premiere Elements 11, on a Windows 8 PC and when I "render" still pictures, some videos and simple effects -- they lose quality and get grainy --
    HOW DO I KEEP THE IMAGE QUALITY WHEN I RENDER?

    Molnar are you receiving that error during the download or install process?  Also which operating system are you using?

  • How do you keep in image/photo from sliding throughout a movie on iMovie?

    I'm creating an audio movie using a picture as a background, but there is one problem. As soon as I hit play, the song begins to play while the picture slowly starts moving in any direction.
    How do I keep the image from moving, rather staying motionless as in Windows Movie Maker. I tried turning off the Ken Crops effect to no avail. Any help would be appreciated.

    Select the photo. Click on the Rotate, Crop, Ken Burns Tool. Instead of Ken Burns, choose FIT or CROP. Fit will letterbox, Crop will fill the screen by cutting of the edges.
    You can also go into Project Properties and set the default action to Fit or Crop instead of Ken Burns. Then any additional photos you add will be imported the way you want them.

  • When converting word to PDF and reducing the size, the formatting changes how can i keep the format but reduce the size?

    When converting word to PDF and reducing the size, the formatting changes how can i keep the format but reduce the size?

    The original file is 32 MB:
    15 MB is images
    15 MB is Content stream
    2 MB is everything else
    After the PDF/A-1B save as:
    The file is 182 MB
    Almost 100% is Images
    It is an architecture portfolio with many complex images.  Is there a setting when I change to PDF/A that can limit the growth of the image files?

  • With multiple iPhones and iPad, how do you keep from downloading data from one device to another? ie, my calander ended up on my daughter's iPad.

    With multiple iPhones and an iPad, how do I keep from downloading info from one device to another? All of my info, example my calendar, ended up on my daughter's iPad.

    Each device has its own sync preferences with iTunes when syncing multiple devices with the same iTunes library under the same computer login account.
    If sync calendars with the same calendar is selected under the Info tab for your daughter's iPad sync preferences with iTunes, the same calendar will be synced with her iPad.

  • How do I keep my HP1510 All-in-one from printing so many test pages?

    How do I keep my HP1510 All-in-one from printing so many test pages? My printer is connected to my laptop, and it seems that every time I disconnect, the printer wants to print an test page when I reboot. I don't know where the option is to turn this off.
    This question was solved.
    View Solution.

    The pages are likely alignment pages.  When a new cartrdige is installed the printer will print an alignment page that must be placed on the scanner glass and the Scan button pressed to complete the alignment process.  If the alignment is not completed it will repeat when the printer is turned on or perhaps at the end of print jobs.
    The alignment page will stop printing when the alignment process has completed.  See the page here for information.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How can I make a image like this one? (image in description)

    Hi guys I need to know how can I make a image like this one http://img31.imageshack.us/img31/2710/69823211.gif
    I need step by step instructions please. How can I animate it like that? Whats the font? Tell me everything please.

    To do a step by step instruction on here will take someone a very long time, as you havent really said at what level you are at.
    On Youtube there are a lot of animation tutorials for PS. But essentially in this case you are moving that white streak across a few frames at a time.
    The font might be found with the help of http://http://www.myfonts.com/WhatTheFont/

  • How can I make an image appear partially in front and partially behind another layer in Adobe Illustrator?

    How can I make an image appear partially in front and partially behind another layer in Adobe Illustrator?

    Put the image behind the layer (at the back of it or on a layer below). With it still selected, Copy.
    Now Paste in Front (Ctrl+F). Depending on your Paste Remembers Layers setting, you may have to bring the newly pasted copy to the front, or to the upper layer.
    Draw a shape over the image to define the portion of it you want to appear "in front."
    With the shape and the image selected, clip the image using the shape. (Object > Clipping Mask > Make)

  • How can I blur a image with two variables : degree and radius?

    how can I blur a image with two variables : degree and radius?
    a lot of thanks !

    What are the values of these variables supposed to represent?

  • HT1766 I cannot backup my iphone, it keeps telling me the backup is corrupt and not compatible. All forums have suggested I delete the last backup but that was months ago and I'm afraid if I do that and it still doesn't work, I won't have anything saved

    I cannot backup my iphone, it keeps telling me the backup is corrupt and not compatible. All forums have suggested I delete the last backup but that was months ago and I'm afraid if I do that and it still doesn't work, I won't have anything saved. Can anyone help?

    Try to connect in recovery mode, explained in this article:
    iOS: Unable to update or restore
    Before that, back up your device, explained here:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    How to back up your data and set up as a new device
    You can check your warranty status here:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • Is it possible to create an invoive that keeps a running total in one column and in another column keep total of monies spent from a starting amount of funding?

    Is it possible to create an invoive that keeps a running total in one column and in another column keep total of monies spent from a starting amount of funding?

    Hi Sara,
    Many thanks for your reply.  We just brought Adobe Acrobat XI Pro complete
    with Adobe Forms Central, My manager asked whether I could use the forms
    part to create a summary tracking sheet for all of our contracts.
    Having looked at it I could see how to create a table that in the first
    column deleted costs from a starting fund, and in the last keeps a running
    total of all monies spent.
    I agree, Excel does seem to be much better suited to the task.  I was try
    trying to comply with her request
    Regards,

  • How can I email a photo as an attachment only and not as a photo in the body of the email?in the message

    How can I send a photo as an attachment only and not in the body of the email?

    Just drop it into the message. It goes as an attachment. Or select the image, CTRL- or RIGHT-click and select Compress .... from the context menu. Then attach the archive.

Maybe you are looking for