How do I keep border on Master Page on top?

I have a page border and page numbers on my master page that I need to stay on top of all overlapping items. However, I have several rotated images where the corner overlaps the border. I've tried to send them to the back and bringing the border to front but nothing is working. Any advice?

In InDesign master objects are always behind live page objects on the same layer, so you essentially have two stacking hierarchies to deal with -- multiple layers and the order on the individual layers.

Similar Messages

Any ideas on keeping images on master pages consistently high quality display when exporting to pdf?

Any ideas on keeping images on master pages consistently high quality display when exporting to pdf?

Set up the Preflight panel so it checks image resolution. Ask your printer what the appropriate resolution is for your printing process, and set that in Preflight.

How to set unequal columns using master pages in InDesign CS3?

How to set unequal columns using master pages in InDesign CS3?

I don't have CS3 anymore but I don't think this has substantially changed in the last few versions of InDesign.
Choose View > Grids & Guides > uncheck Lock Column Guides. Then drag the column guides to the position you want.

Keeping the A Master design on top

Hello, I have the latest update of Muse but i'm having a problem. I'm trying to put my A master page on top of all the created pages. As of now, all my content overlaps my A master design. I've seen this before on a previous version but would like to know how this is possible to the new version of Adobe Muse. Thank you, please respond.

The stacking order of page elements is not determined by being placed on a master page or not. The stacking order can be influenced by placing it onto the correct layer.
Go to your master page, open the layers panel and create a new layer above all others. Then drag all elements, which shall appear in front of all others, onto this layer.

How do I keep my status bar at the top and not moving from side to side and bottom of phone

how do I keep my status bar at the top of my phone? I let my grandsn play a game on my phone and after he gave it back I noticed my status bar would move from the top to the side or bottom etc

Reset, hold both home and power buttons until the iPhone begins to restart itself, ignore the slide to power off slider. Let the iPhone restart itself. Usually takes about 10 seconds of holding both buttons.
Probably do not need this, but Portrait Lock can be set by, pressing home button twice quickly, slide bottom row of icons to the right one time, tap the Portrait Lock icon.

How to add the border to full page

Here has the problem about adding the border to full page. How can I fix it?
The border is added as below.
However, the border is
disappear when it comes to print page.
Thanks!

Hi,
It seems you are using Word 2013, if not, feel free to correct me.
I actually tested on my Word 2013 but couldn't reproduce this issue. If I added the border to a page, the print preview displayed the border as expected.
Is this issue reproduceable with another document? If so, please exit Word and try to find the Normal.dotm template, rename it to .old, thus Word shall generate a new one the next time it starts.
Normal.dotm is the template upon which all new blank documents are based. It opens whenever you start Microsoft Office Word 2013 and it includes default styles and customizations that control the basic look of your document. Changes you make to Normal.dotm
will be applied to documents that you create in the future.
To find the Normal.dotm file, navigate to C:\Users\username\AppData\Roaming\Microsoft\Templates.
Hope it helps.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

How to remove infopath ribbon using Master Page?

Hi All,
I would like to remove infopath ribbon using Master Page, using f12 removed like "<div id="s4-ribbonrow"
class="s4-pr s4-ribbonrowhidetitle" style="display:none">". But how to perform in original master page? Thanks in advance!

Hi,
Based on your description, my understanding is that you want to remove InfoPath ribbon using Master Page.
using F12 to find the <div id=”RibbonWrapper”> section:
Navigate to :C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\TEMPLATE\LAYOUTS\ FormServer.aspx. Add the following CSS into <head runat="server"></head>section:<style type="text/css">
#RibbonWrapper
display: none !important;
</style>
Best Regards,Lisa Chen
Lisa Chen
TechNet Community Support

How can you get get two master pages to repeat in a document with one of them having numbering.

How can you get two master pages in Indesign to repeat when one of them has a numbering section and the back side is a common back. For example, Master A has numbering 001-500 and Master B is the common back for all 500 pages.

My guess is you either want to use a numbered list for the numbering, rather than a page number marker, or you want to make two files and print a single page file with the static text 500 times, then flip the stack and print the 500 page file.
What are you trying to do?

How do I create an underlying master page for my master pages (without messing them up)?

I created a Muse site long ago, and wanted to fix my SEO easily overall by better analytics among other things.
Perhaps I am doing this the wrong way but I was thinking I could create a master page that I could just drop the html I needed into, and thus not fuss too much with my other pages. The problem is I already have master pages that my site is based on (before you could do this), and it would be much easier to have those master pages stem from one source (a Master master page?).
Everytime I try to do this it changes my current master and final pages. Anyway I can create and invisible master so this doesn't happen?
What should I do instead?
THANK YOU.
William

Thanks,
Your intructions were my plan untill I realized that in doing so, it changed the backgrounds etc of my current masterpages. I realize that this is a lack of planning due to my very rusty design principles, and something I wouldn't have done in my day job if the features had been in place. (so thank you for the new features!)
While I realize I could probably fix this by recreating the site with a uniform underlying Primary Master Page feeding into my Secondary Master Pages, I was trying to create a master page that in effect wouldn't change a thing in the other subservient masterpages (thus allowing me freedom to create groups of pages with common analytics or any other types of code).
Simply when I take your suggestion, things change... can I do this without making things change?
Not sure if this makes sense. I am trying to avoid coding or a overhaul b/c of time constraints.
William

How to Add App Part to Master Page OR Page Layout

I have a very simple requirement.
I need to add an app part on left nav so that it appears on all the pages. E.g. Its a calendar app which shows holidays.
If its not doable in master page i left with no choice to add it in page layout.
But I dont find it in Snippets within Page Layouts or master page...
Is there any way?
Prasad

Hi Prasad,
A very similar conversation was recently discussed here:
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/ed858354-fa66-42fa-8afa-2352ada015be/add-app-client-app-part-in-master-page?forum=appsforsharepoint
Although not advisable to add webparts directly to masterpages but there are options using delegates to do so.
Thanks, Ransher Singh, MCP, MCTS | Click Vote As Helpful if you think that post is helpful in responding your question click Mark As Answer, if you think that this is your answer for your question.

How to make guides on a master page more effective

I have a grid of guides on a master page. They are visible in my working pages, but they don't have that "magnetic" quality that I expect - things don't snap to them. I have layers in the master page and layers in my working pages. Can someone help me sort out what I need to do to make the guides more effective? CS4 on a Mac.

Guide Options "Snap to zone" 1px?
Also, 1 pixel isn't much, maybe you're not seeing the snap. Try 5 pixels

How do I keep the Reference Point setting at top, left

The nine-by-nine grid in the top left corner (where the vertical and horizontal rulers meet) won't stay selected as the top left setting depending on what I select in my document. Sometimes it's the top left, sometimes it's the bottom right and sometimes it's the top middle. How can I set it so that every box I select in a document will give me the top left reference point (X-Y coordinate)?
I'm proofing a document to make sure it's set-up correctly and all the page-heading colored boxes are starting at the same X-Y coordinate, have the same width and the next box down on the page starts at the proper location. None of these boxes were created on a master page so I have to check each one. (And even if they were, they've all been released from the master to change their colors and place images.) In other words, on one page there is a colored box across the top that is 10p6 high, so the next box down (vertically) needs to start at the X-Y coordinate of 0, 10p6. But when I click on it the reference point is not always at the top left. So I click on the box, then click on the top left reference point, check the X-Y location and height of the box, then click on the next box down the page and click on the top left reference point and compare the X-Y location to the previous box's height.
I have selected the top left reference point with no documents open to set that as my default preference but I didn't create this document.
InDesign CS5 7.0.4
Mac OS X 10.6.8

@Peter / @FergyMac – in case of rotated objects the reference point will change from object to object.
Not rotated object selected:
Rotated object selected:
Uwe

Show bottom border in First page and top border in next page for rectangle in SSRS

Hi,
I have rectangle inside that Text box and tablix are there, where the text data spans to multi pages (2 or 3 Pages) , so the Bottom border in first Page will go off and in other pages both bottom and top border will be not visible, and where the text
data ends in that page we can able to see the closed rectangle bottom border. .“OmitBorderOnPageBreak”
property is set to false only.
Kindly send me if any expressions is there and how to set it, Kindly do the need.

Hi Anand,
According to your description, you have a rectangle in your report, and there are tablix inside this rectangle. Now the issue is that there is no border on the bottom of first page and there is no border on the top of new pages when the tablix break to multiple
pages, right? If I have anything misunderstand, please point it out.
I have tested it on my local environment, and got the same results as yours. It seems this is default setting of Reporting Services. If there is border on the bottom of first page and there is border on the top of new pages, then this rectangle became
multiple rectangles.
The workaround for this issue is that add page header and page footer for your report, and add a line to them respectively. Then run this report, it looks like there is border on the bottom of first page and there is border on the top of new pages.
Thank you for your understanding.
Regards,
Charlie Liao
TechNet Community Support

Custom Master Page with Top Navigation and Left Navigation

Hi All,
I have successfully converted an HTML Page to a SharePoint 2013 Master Page. I also created a Custom Page Layout. Using both them I have created my SharePoint Site with 30+ pages. Each page is consisted with the Top Header Navigation as it is inheriting
from the Master Page I have used. Now I need the left navigation inherit from the master page also. It gives me the advantage of updating it from the master page and affects it through the entire SharePoint Site.
But at the moment I am inserting the Left Nav using a web part as an HTMl code snippet individually for each and every page. If needs a modification I have to go through all the pages and do the modification. This is not convenient also. I want to this left
nav like the SharePoint Current Navigation alternative but within my Page Layout.
Is there an option to chat within these forums?
Could someone help me to solve this problem?
Thanks and regards,
Chiranthaka

Hi,
In your HTML Page Layout, is your "current navigation" in its own content place holder, such as "PlaceHolderLeftNavBar" or did you add the current nav to the "PlaceHolderMain"?
Can you add CSS that hides the left nav found in each content page so that you do not have to manually remove the left nav? Then you could simply add the current nav back into the Master Page.
Eric Overfield - PixelMill -
ericoverfield.com -
@EricOverfield

Session state consistency - how does APEX keep session state across pages

I would like to know how the APEX develper tool keeps session state from being overwritten across mutiltple pages in the same Session. Because this is difficult to explain I'll use an example from withing the APEX dev tool
For Example:
1. I navigate to the page (4150) thet allows me to edit my Page 880 [Window 1]
2. I now do a Cntrl^N to Open a New Window in the same session (this opens on the same Page 880 in the new window) [Window 2].
3. In Window 1, I click an item to update ie I want to put a comment on the Unconditional Branch so click this to go to the Update page. I see the F4000_P4313_ID is passed in the URL (ie the context, UID of the Branch).
4. In Window 2, I change the page to 881 - ie this is overwriting my Session State variables for page 880 with page 881.
5. I click an item in Page 881 to update ie I want to put a comment on the Unconditional Branch so click this to go to the Update page. I see the F4000_P4313_ID is passed in the URL (ie the context, teh UID of the Branch).
6. In Window 1 (the Page 880), I add a comment to the Branch and 'Apply' changes. On returning to the Page the context has changed from 880 to 881 (as expected as Window 2 had overwritten the session state). Slightly confusing for the user as they did go from Page 880 not 881 but ok
What intrigues me is how the Edit Branch page applied the update to the correct branch [good !]. Why weren't the Branch Session state variables (ie the Branch for Page 880) overwritten with the Branch Session state variables for the Branch from Page 881 ?
Both navigations go to the same Page passing the UID of the branch, hence I would of thought the last navigation is the one that would be persisting (ie from Page 881 Window) ?
Any tips on preventing users updating the wrong record because of the Session State being overwritten would be most welcome.
Look forward to hearing from you.

Let me take a shot at explaining this.
Session state is stored in Oracle database tables. When a APEX page is rendered, those tables are read and the HTML is sent to the browser. When that page is submitted, all the HTML form inputs on the page are saved back into session state over-writing any existing values for that session
So, in your example, since Page 4313 has the hidden page item (the "GUID" of the branch), it doesn't matter if any other window has the same page open with some other GUID. Each page is a self-contained "unit" which has all the information necessary to properly process that page when it is submitted.
Think of it this way...in your example, when you have windows 1 and 2 open (window 2 was opened after window 1), go back to Window 1 and click the browser's Reload/Refresh button. Instead of refreshing the same page (branch 9000000), you will find that it will load branch 8000000! This is because session state is read from the database and when Window 2 was rendered, it has set F4000_P4313_ID in session state to 8000000.
Hope this helps.

How do I keep border on Master Page on top?

Similar Messages

Maybe you are looking for