How do I keep my text from being distorted when I do a lower arc?

When I create an upper arc in my text it looks normal, but when I do a lower arc, it expands all the letters in the middle instead of just curving them, so that it has a sort of "fish eye" look. How do I keep it from doing this?

No, gratitude for your help. Since I've never done the text the way you suggested, I found a video on youtube to show me how. However, I have not been able to get satisfactory results. Why will PS allow me to make a perfect upper arc with my type, and it won't do the same on the lower arc?

Similar Messages

How can I keep my images from being deleted when using Image capture. Even when I do not check the box they still get deleted.

This happened after I updated my operating system.

Whats with the MBP lid? Dont close it ... if you're so concerned! Just go to System Preferences/Energy Saver and set it to how you like it.

How do I keep .mov clips from being squashed when imported into iMovie HD6?

Hi there! First time poster... Hoping someone can help me out with this:
I've stupidly shot some footage with my digital camera sideways, portrait-style. I used QuickTime Pro 7 to rotate the footage clockwise, preserving the aspect ratio, so now the .mov clips are 480x640 pixels (so 3:4, instead of the standard 4:3).
When I import the clips into iMovie HD 6, the footage gets squashed to fit the 4:3 screen, making everyone look shorter and fatter. The Help file advises that iMovie "automatically adjusts incoming footage to fit the screen size (aspect ratio) of your project".
Is there some way I can opt out of this automatic adjustment? I'd prefer to have black bands on the sides of the screen than squashed video!
Thanks for any help you can give. Cheers!

You'll need to make an all black 640X480 image file and add it to your video.
Adjust its layer so it is in the background and then reduce the dimensions of your video so it fits over it.
Bring this new file into iMovie.

How do I keep my Imessages from being viewed on other devices under my apple ID?

How do I keep my Imessages from being viewed on other devices under my apple ID?

No, you can authorize any number of email addresses on your Apple Id and then select one of those to use as an alternate Send and Recieve for Messages. It isn't necessary to use seperate AppleIDs. I use my phone number on my iPhone and an email address on the iPad.

Re: How do I keep an application from being started morethan once?

Here are some quick ideas. None of them should be too hard to implement,
although each has some drawbacks.
1. Have a login server track who is logged on, and if there is already a
logon for a given user or a given machine, then deny the application
startup. The nice thing about this is that a user will not be able to have
multiple logins even by going to another machine. Then again, this may not
be so nice, and you also get a possible single point of failure on the
login server for which you will have to prepare.
2. Drop to the operating system, and get a list of processes for the client
machine. If the name of one of them matches the name of application that
is being run, then deny startup. This avoids a network hit, but requires
some OS specific code. Also, a clever user could change the name of an
executable to get around this. Note that a user could have another login
on another machine.
3. Write to a file on the local machine. You can hide the file in some
suitable place, and can also scramble some information so that a user
cannot get around having this file present by reading from the file at
startup and then writing to it. Based on the state of your application,
the file will have some scrambled information indicating if an instance of
an application can be started. If you retain the write lock (i.e. do not
close) the file for the duration of the application, you increase your
security at the risk of a confused user if the application gets terminated
without releasing the lock. Depending on the OS where the client will run,
this could be an issue. If you like this option, perform some experiments
first on all configurations of an example client machine to determine the
behavior. Again, this only works to prevent an extra login on a single
machine, not system wide.
If you are not concerned about your users hacking around too much and don't
care about a login on another machine, I would opt for some version of
number 3. Otherwise, I would venture number 1.
Regards
CSB
At 07:47 AM 2/18/98 -0500, Martin G Nystrom wrote:
A user can launch an application, then launch it again. How do we make it so
that the user can only run one instance of the application?
Martin Nystrom
Eli Lilly and Company
([email protected])
Curtis Bragdon, Senior Consultant, Forte Software
[email protected]
Voice Mail: (510) 986-3807
Paging: (888) 687-6723
"I've seen dozens of triggering towns." - Richard Hugo

Yet another quick and dirty solution is to use local ExternalConnections.
This is a single instance per machine solution.
Example is attached.
(See attached file: TestOne.pex)
[email protected] on 02/18/98 10:01:07 PM
Please respond to [email protected]
To: [email protected]
cc: [email protected]
Subject: Re: How do I keep an application from being started more than
once?
Martin,
there are two ways to read your question
(a) no more than one instance of an application per machine
(b) no more than one instance of an application per "user"
now if a user has only one machine, and your system has "userids" and you
only want
one active "session" per "user" then the distinction is irrelevant.
However, many systems
let people share logins, so a token based thing enforcing one login will be
problematic.
The downside of #1 approach suggested by Curtis happens when a machine gets
hosed without "logging" the user off the security system, then they can't
get in until their ticket expires or a sysadmin gets involved. Should be
manageable, however. But this enforces one application
instance per user, unless you check both for the presence of an active
token for that user as well as the presence of a token tied to that
particular node name. Otherwise there is nothing to prevent the same user
from launching the app again and logging in as a different user. This is
definitely the best approach of the bunch, and can be adapted for either
(a) or (b).
Suggestion # 2 won't work unless the application is built as a compiled
client,
since the process name will be 'ftexec' and not the "name" of the
application. And it doesn't
prevent a user from launching the app from a different machine (or people
sharing logins). So again it depends on what you are trying to achieve.
#3 also only prevents multiple instances per machine, not necessarily by
user. Of course
most people don't have multiple machines. The point is that you may be
trying to
prevent your users from sharing logins. In which case the file thing won't
do it.
Some other ideas:
1. You could, however, enforce one application per machine using the
installed partition agent's ExecutingPartition instrument name. As long as
the user doesn't run the app in a different environment, you can have the
app check at startup time if there is another
ActivePartition running under the same InstalledPartition name.
(ActivePartitions are child agents
of InstalledPartitions).
2. use the ObjectLocationManager and bind a simple object into the naming
system using a naming scheme such as
/MyApplication/MyNode or
/MyApplication/MyUserId
the presence of either one would indicate that another instance of that
application is running on either that machine or that user. Of course
these have to be cleaned out, and subject to similar downside as
alternative #1. So you'd essentially be using the forte naming system as a
distributed lock manager (ouch).
3. Have the application remove the shortcut to launch it upon startup, and
recreate it when it is finished, or move it to a hidden place. There it
is - the worst idea I've ever come up with. Don't
do this!
Regards,
John
From: Curtis Bragdon <[email protected]>
Date: Wed, 18 Feb 1998 16:36:58 -0500
Subject: Re: How do I keep an application from being started more than
once?
Here are some quick ideas. None of them should be too hard to implement,
although each has some drawbacks.
1. Have a login server track who is logged on, and if there is already a
logon for a given user or a given machine, then deny the application
startup. The nice thing about this is that a user will not be able to have
multiple logins even by going to another machine. Then again, this may not
be so nice, and you also get a possible single point of failure on the
login server for which you will have to prepare.
2. Drop to the operating system, and get a list of processes for the client
machine. If the name of one of them matches the name of application that
is being run, then deny startup. This avoids a network hit, but requires
some OS specific code. Also, a clever user could change the name of an
executable to get around this. Note that a user could have another login
on another machine.
3. Write to a file on the local machine. You can hide the file in some
suitable place, and can also scramble some information so that a user
cannot get around having this file present by reading from the file at
startup and then writing to it. Based on the state of your application,
the file will have some scrambled information indicating if an instance of
an application can be started. If you retain the write lock (i.e. do not
close) the file for the duration of the application, you increase your
security at the risk of a confused user if the application gets terminated
without releasing the lock. Depending on the OS where the client will run,
this could be an issue. If you like this option, perform some experiments
first on all configurations of an example client machine to determine the
behavior. Again, this only works to prevent an extra login on a single
machine, not system wide.
If you are not concerned about your users hacking around too much and don't
care about a login on another machine, I would opt for some version of
number 3. Otherwise, I would venture number 1.
Regards
CSB
At 07:47 AM 2/18/98 -0500, Martin G Nystrom wrote:
A user can launch an application, then launch it again. How do we make itso
that the user can only run one instance of the application?
Martin Nystrom
Eli Lilly and Company
([email protected])
Curtis Bragdon, Senior Consultant, Forte Software
[email protected]
Voice Mail: (510) 986-3807
Paging: (888) 687-6723
"I've seen dozens of triggering towns." - Richard Hugo
John Jamison
Vice President of Technology
Sage IT Partners, Inc.
415 392 7243 x 306
[email protected]

How do I keep my texts from showing up on my daughter's macbook air?

How do I keep my texts from showing up on my daughter's MacBook air?
jmacrdldn

hello,
go to iMessages on your daughters computer.
in the top left go to messages and select preferences.
in accounts tab. next to where it says your apple ID click sign out.
this should resolve your query, please let me know how you get on.
if you do not have access to your daughters computer I would suggest changing your apple ID password.

How can I remove ASCII text from a field when I use it in a query

How can I remove ASCII text from a field when I use it in a query?
I am running a select statement on a table that appears to have ASCII text in some of the fields. If I use these fields in the where statement like the code below nothing returns:
SELECT FIELD1 FROM TABLE1 WHERE FIELD1 IS NULL
But the field looks empty if I do a straight select without the where clause. Additionally, one of the fields has text but appears to be padded out with ASCII text, which I need to strip out before I can use this field in a where or join statement. I have tried using a trim, ltrim, rtrim, to_char, nvl, decode and nothing works. When I use excel to run the same query it looks as if these ASCII fields are boxes.
I have asked our DBA team to see what they can do to prevent these from going into the table, but in the mean time I still need to run this report.
Do you have any suggestions?

Can you provide an example? I've been trying (for
example) "select translate(' test one', ascii(' '),
'X') from dual" with no luck.
Thank you.To replace space, you should query like this:
select translate(' test one', chr(32), 'X') from dual instead of select translate(' test one', ascii(' '), 'X') from dual Thanks,
Dharmesh Patel

How do i keep my cursor from jumping around when i am typing

how do i keep my cursor from jumping around when i am typing [email protected]
== This happened ==
Every time Firefox opened
== none

Check your settings in System Preferences > Trackpad
Try a different Tracking speed.
Sometimes just cleaning the trackpad can avoid erratic cursor behavior.
How to clean Apple products

How do i keep certain songs from being uploaded from my library to my ipod

how do i keep certain songs form being uploaded from itunes to my ipod the check button does nothing
30gig ipod Windows 98

Set your iPod so you can manually manage your songs, see here for details:http://www.apple.com/support/ipod/tutorial/ipgettingstartedt3.html

How do I keep older emails from being in the cloud, taking up my space?

How do I keep older e-mails out of the cloud, taking up my space?

Patti23 wrote:
How do I move purchased movies from itunes to the icloud?
Delete them from the local computer. Nothing gets moved. If the content was purchased from iTunes it should be available for download again in the future.
Patti23 wrote:
I want to keep them on the ipad they have been moved to.
If the device is synced with iTunes on the computer and the content is deleted from iTunes it will also be removed from the device.
Realistically, if you want to keep the content, keep it stored locally. Purchase an external drive to store the content on. Keep in mind that iOS devices are NOT backup devices, they merely mirror the content in the iTunes library on the computer.

How can I stop sound track from being divided when adding clips to other tracks in PrE12?

The situation:
I have a project with several minutes of video clips on the timeline (expert view) in "Video 1/Audio 1." There is also music on the sound track (below the empty "Narration" track).
Any time I make an edit to the Video 1 track, PRE cuts the Sound Track. (Note that this is not the Audio 1 track, it's the sound track which is two tracks away.) If I insert a clip, the Sound Track is cut and left with a gap. Same if I do a FreezeFrame insert. This is bad enough (make ten insertions, have the Sound Track chopped into ten separate pieces), but it gets worse: when I try to slide the Sound Track pieces back together, the Video 1 clips will be moved around.
This appears to be a major bug but I'm hoping there is a simple way to deal with it.
Here's what the Manual (p.71) has to say about it (not much).
"When you insert a clip into the Expert view timeline, adjacent clips on all tracks shift to accommodate the new clip. By shifting all clips together, the audio and video of the existing clips remain in sync."
* The question here is, adjacent to what? The Sound Track is a continuous music clip of many minutes; it is alone on the Track, and there is nothing on the track above it (Narration track). So it's not adjacent to anything, and yet it is being chopped up.
The Manual continues:
"Sometimes, you don’t want all clips to shift with each insertion. For example, when you add background music that superimposes the entire movie, you don’t want clips to shift."
*They got that right, but they don't say anything about how to prevent it.
This next makes no sense at all:
"To shift specific clips togather, press the Alt key as you insert. At a time, you can shift specific clips simultaneously on a maximum of two tracks. These include the track receiving the insertion and the track containing the linked audio or video (if any). The affected tracks shift together, remaining aligned. The clips on other tracks are unaffected."
*There is no mention of how to specify what clips would be shifted, or not.
I'm not dealing with linked clips. And they tell me how to shift clips (sort of) but nothing about how to stop clips from being cut up and shifted. This all makes it very hard to create a coordinated product.
Any suggestions or solutions will be much appreciated.

Thanks, ATR,
I wll try this--but I still am unclear on how to do what the Manual says is possible: select clips on another track that WILL be moved, if I so desire, so as to remain synched to the main Video track.
UPDATE:
In the case of inserting Freeze Frame, I just tried both Ctrl method and Alt method, and neither worked.
1. Put Video on Vid1 track
2. Put Music on Sound Track
3. Ran a few seconds of Vid
4. Stopped Vid, selected Freeze Frame
5. Held down Ctrl key while clicking "Insert in Movie" also tried with holding down Alt key.
Result: a 3 second still was inserted int the Vid1 track. A corresponding gap was created in the Sound Track.
6. Slid the final part of the Sound Track to the left along the timeline to re-connect it to the next segment created by the above process.
Result: the video following the final Freeze Frame was pushed to the right end of Video1 track.
7. Slid the Sound Track all the way to the left.
Result: the entire Video 1 Track contents were pushed to the right and divided in pieces.
I documented each step with screen shots which I can send if you want them and if I can figure out how to do it.
UPDATE #2
In the case of inserting a video clip to the Timeline, I just tried both Ctrl method and Alt method, and neither worked.
1. Locate video in Project Assets
2a. R click video in Project Assets (pull-down menu appears), hold down Ctrl, click Insert to Timeline.
Result: Vid clip is inserted on Video 1 track, Sound Track is separated with a corresponding gap.
2b. R click video in Project Assets (pull-down menu appears), push Alt
Result: pull-down menu disappears as soon as Alt is pushed down.
I can stil drag the Vid clip but it's one more manual step...I love shortcuts!!

How do I keep my computer from shutting off when I plug in my iphone

What do I need to do to keep my computer from shutting down each time I plug in my iphone?

Hello goldeeneyes!
I'd love to tell you how to adjust your screen settings. Keep in mind that a longer screen timeout may drain your battery significantly, so you may wish to change it back when you are not using your knitting application.
Please go to Settings>Display and change the Sleep to a longer period of time. Happy creating!
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

How do I keep my iphone from duplicating songs when I sync to my computer?

How do I keep my i-phone from dulicating songs when I sync to my computer, and how do I delete the duplicated songs from my phone?

Hmmm, mine has never done that in the 7 1/2 years I've had an iPhone, and I've never seen a post that reported this problem before, so it's a mystery. If you provide a little more detail maybe someone can help. For example, is it all music that gets duplicated, or only some? Where did the music come from; the iTunes store, ripped CDs, or imported MP3s? Do you see the duplicates in the iTunes music library on your computer? What kind of computer? What version of iTunes? What operating system?

App or podcast downloaded to iphone is deleted from iphone and transferred to iTunes 11. How can I keep the file from being deleted from the iPhone?

I recently updated iTunes from version 10.x to 11. In version 10, I could download a podcast or an app to my iPhone from the app store, then the app or podcast would co COPIED to iTunes during a sync. Now with version 11, when I sync, the app or podcast is deleted from my iPhone and MOVED to iTunes. How can I get back the old feature of making a copy? This is a very dumb thing that happens in iTunes and I can not believe that I am the only one to complain abou this. Please help me. What do I need to change in iTunes to keep my copy on the iPhone.
Thanks to all you geniouses out there!
Doug

Not 100% sure of your question. If you are wanting to delete apps from itunes just right click then delete then empty recycle bin.

How do I keep iPhone Contacts from being visible in iMessage on MacBook?

I've disabled iMessage, but if you open it and try to type a message, you can easily see all the Contacts from my iPhone. How do I prevent that?

HI,
When I have turned Off the Contacts app part of my iCloud account it asks me whethr I want to keep them on my Mac (and not whether I want to delete them from all devices).
They always stay on my iPhone.
7:36 pm Sunday; June 1, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How do I keep my text from being distorted when I do a lower arc?

Similar Messages

Maybe you are looking for