How do I keep the quality when I bring a video into Dvd studio pro 3

just curious, the quality is really bad when I burn a dvd. the m2v movie that comes out is really bad, just curious if you would know how to fix this. It looks fine when I export it from fcp6 but when I bring it in to DSP3 it looks like something that's gone through the system of an old women.

whatever that means.
why not detail your complete workflow along with bit rate settings, treatment of audio, original source codec, length of the video in total minutes.

Similar Messages

HELP how do I compress my DV Video into DVD Studio Pro??

Thank you in advance for taking your time out to even read this!
I have a 40 minute 4:3 DV format video in final cut pro and I need to fit it on a DVD (4.7 gig) using DVD studio Pro. I have the whole FInal Cut Pro package (compressor, live type, etc...) so how would I compress the video and then put it in DVD studio pro, with the highest video quality possible?
Again thanks to all you people taking time out to just help!!!! Darin.

Take a look at these liks also
http://dvdstepbystep.com/faqs_7.php
http://dvdstepbystep.com/faqs_3.php
http://dvdstepbystep.com/qc.php (Compressor 2 but concepts apply)
http://dvdstepbystep.com/fasttrackover.php (General workflow, but you can send from Final Cut without rendering exporting, more for settings)

How can I keep the formatting when converting from Word to pages?

How can I keep the formatting when converting from Word to pages?

Use only formatting that is supported (in the same manner) in both applications. You'll need to find which that is through trial and error. Beyond those formatting options, you'll need to do some corrections, as Fruhulda suggests.
Regards,
Barry

How i can increase the volume when i playing a video? dont showing the volume control in the player..

how i can increase the volume when i playing a video? dont showing the volume control in the video player..

Are you sure you increased the caller volume? This is only adjustable while in conversation. So, while you are calling you'll see a few icons on your screen and one of them is to adjust your caller volume.

How can I import .mov file into dvd studio pro?

Hi,
I have a .mov file and want to but a dvd with menu and chapters. But when I try to import the .mov file into dvd studio pro it says Incompatible format. How can I import my .mov file in to dvd studio pro?

Two ways…
Transcode into a codec like Pro Res, import into DVDSP and let it do the encoding.
Or better yet:
Import into Compressor, choose a DVD preset and let Compressor encode. It will make two files, separate video and audio files. Import those into DVDSP.
Good luck.
Russ

BEST HD QUALITY SETTINGS IN COMPRESSOR TO EXPORT TO DVD STUDIO PRO

I shot in HD, and edited with FCP. I am now trying to use compressor to make a DVD, but first I am trying to figure out what settings I should use in compressor to get the best quality for my DVD?? I wil be completing the DVD process in DVD studio pro.... Thank you!

Unless you have HD-DVD media and an HD-DVD burner, you are doing an SD DVD. As in, what most DVDs are these days (Blu-Ray and HD-DVD still being quite cost prohibitive on the user end). If you have standard 4.7GB DVD-R or DVD+R this is SD DVD.
As far as settings, depending on how many audio tracks you have and what format they are, I would take one of the two-pass MPEG-2 settings (e.g. MPEG-2 Best Quality 90 Minutes) in compressor, go to the Encoder pane -> Quality tab and raise the Average/Max bitrates. Set Motion Estimation to Best.
Keep in mind you want all your bandwidth usage (audio, video, subtitles, etc) to go no higher than ~9.5Mbps lest you run the risk of players choking.
If your HD source is real clean, even at the default 6.2 Mbps you should get great quality, but some extra bits in there will give more room to avoid artifacts...
Hope that helps.

Is Compressor 4 necessary when sending from FCP X to DVD Studio Pro

I am making a FCP X movie and when it's finished I want to put it on a DVD using DVD Studio Pro. I have done this before but now I'm wondering if I should first export it to Compressor 4 and then to DVD Studio Pro. I understand that if I was puting it on YouTube or an iPod device I would need to Compress it however why would I need to go to Compresss 4 first if ultimately going to DVD Studio Pro? Would I get a better Codec quality then what I get from exporting in FCP X using their default Compression format i.e. Quicktime? Should I use an Apple ProRes Compression from Compressor 4? I guess I really don't understand the encoding quality options very well however I do want the best quality on my finished DVD. The DVD or Sequence is somewhere around 20 - 25 minutes if that makes any difference in your response.

People will tell you that encoding in Compressor will give the best quality, but that assumes you are using a suitable preset and for your length of video the ready made ones are unsuitable and will waste time as they are all 2-pass with variable bit rates (VBR).
For DVDs under 70 minutes long the best quality and fastest encoding times are achieved using a constant bit rate (CBR) of around 7.5mbps.
For your short DVDs you should achieve the highest quality and fastest processing by simply exporting the project from the timeline as it is, drop it into DVDSP and set DVDSP to encode and burn it at the specs I gave above.
Returning to my opening comment, you will frequently find that the theoretically best solution to a problem results in no discernible improvement but often entails a lot more work and time-expenditure.
P.S. You might get marginally better quality by raising the bit rate to 8mbps but you run a slight risk that some old or cheap players may not be able to keep up, resulting in dropped frames.
Message was edited by: Ian R. Brown

AAC audio file increase in size when imported into DVD Studio Pro

Hello all!
I just encountered a very unique issue with the DVD Studio Pro. I used the compressor to export my video as an MPEG2 file and my audio as AAC file. After the compression my audio file had an .mpg4 extention and was about 160MB in size. When I imported it into my DVD Studio Pro project, however, the audio increased in size to 1.2 GB. I tried so many different compressions, but the problem really is (I think) that the file bumps up in size once imported into DVD SP project. Is there anything in preferences that I need to adjust or change? Please help!
Thank you.

Hi
I'm a little lost now with versions history, but if you have A.Pack in your App folder, then must use it. Check this tutorial: Encoding AC3 with A.Pack.
Compressor 2 and 3 has AC3 encoding inside the main application.
Alberto

How can I keep the quality of an MP4 video high when I export an interactive PDF from InDesign?

I am making an Interactive PDF with embedded MP4 video using InDesign. When I view the video in the PDF it has degraded the quality and the colour contrast is poorly affected. I can have the video as a floating window but this gives a harsh black line around the video when it plays which is not acceptable.
Can anyone advise how to maintain the quality of the original video when it is embedded?

You can control the quality of the video (aspect ratio, pixel dimensions, frames/minute, etc.) by using the Adobe Media Encoder which comes with InDesign CS5 or later installations, including InDesign CC. InDesign only includes what you have placed and passes it on to the PDF file. There are no video quality controls in InDesign.
You cannot change the way Adobe Acrobat or Adobe Reader displays the MP4. If you don't like the way Acrobat/Reader handles display of a floating window, then you'll have to display it within the page. For more info, inquire in the Rich Media Acrobat forum.

How do I keep the vocal soundtrack from on imported video while inserting clips from another video?

I'm new to iMovie10 and this is a first for me to ask a question on the community support site. Anyway, I have this video of a stationary shot of a demonstration with the presentor giving his vocal explanation of how to perform the task at hand. I also have a video of hand-held shots with close ups and different angles of the same presentation filmed simultaneously. How do I insert the clips from the hand-held video into the main video without losing the audio of the main video? Thanks ahead of time for any help.

First, go to iMovie/Preferences and make sure the Advanced Tools are enabled.
If so, you can use the Cutaway Feature.
Drag the second clip and drop it on the first clip at the frame where you want the second clip's video to start playing. A popup menu will appear. Choose Cutaway.
Here is a good Tutorial on the Cutaway Feature.

Hello. How do I get my FCP sequence into DVD Studio Pro? I've tried exporting as QT movie, then importing as asset, am told format is incompatible.

Trying to get my HD sequence in FCP to burn to DVD. How to accomplish this? I export sequence as Quicktime movie, try to import as as asset, after a couple minutes a window says "format incompatible" or something to that effect.
Also, in FCP the canvas only shows timeline video when it's playing. When stopped, blank screen -- how do I fix this?
Many thanks.

#42 - Quick and dirty way to author a DVD
Shane's Stock Answer #42 - David Roth Weiss' Secret Quick and Dirty Way to Author a DVD:
The absolute simplest way to make a DVD using FCP and DVDSP is as follows:
1. Export a QT movie, either a reference file or self contained using current settings.
2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.
3. Select the left blue one and hit delete.
4. Now, select the green one, right click on it amd select the top option "first play".
5. Now drag your QT from the broswer and drop it on top of the green monitor.
6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."
7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.
THATS ALL!!!
NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing. Then take THAT result into DVD SP and follow the rest of the steps. Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.

Having a problem with audio in DVD Studio Pro with the finished copy

I am making a DVD of a clip I had transferred from a mini DV. All the audio was present when I transferred it. I had then turned it into an MPEG movie format (.mpg). When I play that clip there is audio. Then I compressed the file on Compressor. I selected the file format by choosing Apple > DVD > DVD: Best Quality 90 minutes > MPEG-2 6.2Mbps 2-pass (the clip was about an hour and 20min long) and compressed the clip. I then opened DVD studio pro, made a menu, and then added this new file (MPEG-2 6.2Mbps 2-pass). I burned the DVD and put it into my DVD player. The picture was great and everything worked fine except there was no audio. How do I get audio into this DVD? I have tried compressing my .mpg file into the Dolby Digital Professional 2.0 option that is under DVD: Best Quality 90 minutes, but when I try importing that into DVD studio pro it a message pops up saying "Incompatible format." It might also help mentioning that when I saw the file size on the Dolby Digital Professional 2.0 after compressing it, it said Zero kb. How would I get audio onto this DVD? I would really appreciate your help, I tried to be as detailed as I could. This DVD is for a family member and is urgent, so anyone who can help would greatly be appreciated. Thank you so much.
Message was edited by: rocco7070

If you don't want to go back and recapture the tape you need to understand that MPG files need to be "DeMuxed" to extract the audio. My recommendation would be to use the free MPEG Streamclip and then select your MPG to be Demuxed into an AIFF file. That AIFF file will then need to be converted to an AC3 file, similar to what you did with the video.

I just updated my iphone 4 to ios6 and now I can't keep the wifi connection to stay on. I have to keep entering my wifi password when the phone goes to sleep. How do I keep the wifi connection when I wake up the phone?

I just updated my iphone 4 to ios6 and I can't keep the wifi connection when the phone goes to sleep. I need to keep entering my wifi password when I wake up the phone. How do I keep the wifi on each time I walk into my house without reentering my password?

What? Do you work for Apple?
I have been on the phone for Apple since 5:30 Eastern Time today. We are still on the phone with them. It is 10:14 PM. We are going to get a new phone because the ios6 has major problems! The wifi connectivity is a serious problem. Apple is aware of it. More people need to do something about it. I am willing to start a class action suit against them. I have means to an attorney pro bono. If you are having problems using your iphone 4 or 4s with wifi and ios6...I suggest you spend time calling a senior advisor and get a new phone sent to you. They know they messed up but they can't fix it.

Exported video size smaller than original video size. How do I keep the original size?

I exporting a video from Adobe Premiere CS6 today, and I noticed the video was about 1/2 times smaller than the original video I put in. I then uploaded the video on YouTube, and the size was still the same. I tried to change the preset to 1080p 29.97, 1080p 25, etc. and the same with 720p, and 480p, but the size only changed slightly.
How do I keep the original size after exportation of videos?

More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840
Also, exactly what are you editing, and what are your export settings?
Also, The tutorial list in message #3 http://forums.adobe.com/message/2276578 may help

HT1338 i purchased dvd studio pro and im trying to install it but when i go to click continue it gives me this "you cant open the application gestalt tool becasue powerpc applications are no longer supported" what does that mean and how can i fix this ?

i purchased dvd studio pro and im trying to install it but when i go to click continue it gives me this "you cant open the application gestalt tool becasue powerpc applications are no longer supported" what does that mean and how can i fix this ?

I note this information from Wikipedia: "DVD Studio Pro was a high-end software tool published by Apple Inc. to allow users to create DVD masters to be sent out for replication at production houses. Its tight integration with other Apple applications allows users to take Final Cut Pro and Motion projects and render them into the DVD format without encoding to intermediary formats. This streamlines the production workflow and reduces overhead."
If that is your intent, finding a substitute program that will run on your Mac may not be as efficient. Others can advise you on alternatives, or you can post a new thread specifically with that question.
BTW: what Mac and what version of OS X?
If it is important to you to continue to use DVD Studio Pro, consider the option of installing Snow Leopard (with Rosetta) into Parallels on your Mac:
[click on image to enlarge]
Full Snow Leopard installation instructions are here.

How do I keep the quality when I bring a video into Dvd studio pro 3

Similar Messages

Maybe you are looking for