How do i keep the results from a formula but delete the original data

I want to delete the column of original data and only keep the results.

Hi rdavidland,
Select and copy the cells that contain the formula.
Menu > Edit > Paste Formula Results.
Delete the original data.
Regards,
Ian.

Similar Messages

How do you extend the frame from one side but not the whole thing?

I am updating my blog and want to put a rectangle picture into the pre-set frame. I need to stretch it horizontally but the entire frame (i.e., both sides and top/bottom) stretched instead. How do you extend the frame from one side but not the whole thing?

In Inspector, select the Graphic Inspector. Choose, from the Fill options, Image Fill. Select the image from the dropdown and click Open. Now go back to Inspector and click on Scale to Fit. Choose from the options in the window. There are a number of them which should address your problem:
With the Blog template, you will probably need to insert a text box over the stock placement frame and work with that instead.
Mark

After an erroneous contacts delete on the mac, they've been removed from icloud and all the synced devices. I was able to restore the contacts from a backup, but since the iCloud version is newer than the backuped one, they are deleted every iCloud sync

After an erroneous contacts delete on the mac, they've been removed from iCloud and all the synced devices.
I was able to restore the contacts from a backup, but since the iCloud version is newer than the backuped one, they are deleted every iCloud sync.
Now I have an iPhone with the contacts and iCloud deactivated, but I lost all the contacts on the Mac and the iPad.
There is a way to tell iCloud "restart using the contacts I have on this device"?

An iCloud backup will save the state of your Camera Roll at the time of the backup but, if you delete photos from the Camera Roll, they will not be in the next backup taken.
If you are using the iCloud Photo Library (beta) read this FAQ which will tell you what happens when you delete photos from one of the devices sharing the Photo Library.
iCloud Photo Library beta FAQ - Apple Support
The relevant section is:
How does iCloud delete photos and videos from iCloud Photo Library?
Deleting a photo or video from your Photos app will also remove the item from iCloud Photo Library and from your iCloud storage allocation. Photos and videos you remove can be recovered from the Recently Deleted album for 30 days. After 30 days, your content will be removed from the Recently Deleted album. Photos are backed up on our servers for up to 30 days after they're deleted from the Photos app. If you need to recover these photos during that time, contact Apple Support.

I have different music files all over three computers. Everytime I connect my iPod to one of these computers it transfer the music files from that computer but delete the music files that I already have in my iPod. I want all my music in my iPod.

I have different music files in three computers.
Everytime I connect my iPod into one of these computers it transfer the music files from that computer but delete the music files that I already have in my iPod.
I want all my music in my iPod.
What I need to do?
Thanks!

I haven't researched it and I don't claim to know everything about iTunes, but it has always been my understanding that you can only use one computer per iPod, but you can have multiple iPods per computer. From what I understand, this is to prevent illegal sharing and whatnot.

How do i remove album art from a tune without deleting the song?

i have songs with the wrong artwork. i cant seem to get rid of the wrong one. it just stays there after i drop in the right art.

You need to delete the old artwork.
Dropping new artwork will simply add more.
Get info on a song and click the Artwork tab.

How do I stop Google results from redirecting me back to the main site itself?

Hi, so today, this morning, when I booted up my laptop (Mac, OS X Mavericks), Safari and Google started freaking out on me. It was the first time anything of the sort has happened to me before, and being the lousy tech person I am, I am freaking out quite a bit.
Let me elaborate.
I opened up Safari as per usual, went on Skype, had a nice little conversation with my friend when she suddenly brought up the topic of Mila Kunis. Me, being the girl that lives under the rock, goes "I don't know anything about her except for the fact that she's pregnant", and my friend goes, "Well, Google it, then!"
So I do, and then all **** breaks loose.
I go to the toolbar in Google, everything's looking normal, and then I enter "Mila Kunis", and click on the first result that pops up (Wikipedia, basically). Now this is where it starts to go strange.
The result doesn't open at all; instead, it redirects me back to the Google homepage: www.google.com.hk. I have tried entering in different results in the Google toolbar, but when I click on any of the results, it always redirects me back to Google. The only way I can open the results given to me is by copying and pasting the URL that is sometimes displayed on the bottom of the link; if not, then I get, you guessed it, redirected back to Google. This can be very annoying as no one likes to enter in the URLs of websites manually.
I have tried many solutions, such as disabling add-ons, starting the laptop in safe-boot and deleting, as some high-tech professionals put it, "files that don't look like they belong". It seems that the problem resides within my laptop, as when I Google things on my phone and desktop computer, it works perfectly fine. Please help, I really don't know what to do.

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test.

This is a somewhat lengthy question, if two people have text msg to one another, is it possible for one party to erase all the texts sent on their end of the conversation from their phone, therefore deleting the conversation on MY phone?

I find myself in the midst of a lengthy divorce and custody battle. Many contentious texts have been sent back and forth between parties, hard copies of those texts were made and submitted to Court. Now I turn on the old- As I had to get a new phone and number- but kept the old phone for evidence- and all my responses are there, but the other parties are mysteriously gone. This has happed to another party involved in this issue as well a third party that receieved texts from said individual.
Is this possible? and if so HOW??? It is the offending parties cell account if that makes a difference. I am glad I made hard copies, but don't know how much it will bring to bear as evidence if the other side of the whole conversation is wiped out?

So you are saying that, if a soon to be ex deleted ME from their phone contacts- then their responses would no longer be visible from my old phone.?
Say we said-
how are you today
                                                       I responded great You?
Good thanks...
                                                          whats up?
Nothing...
OK then all I now see is
                                                       great you?
                                                         whats up?
but their responses are now gone from my phone on their side of conversation. See what I mean?

Suddenly, my 1st gen can't access iTunes store. It sits on "Accessing iTunes Store", with a spinning wheel for days. I can access the store from my iMac, but not the Apple TV. Everything is up to date. What's the deal?

I can't figure out why my 1st gen appletv cannot access the itunes store. All newer movies are coming up to view and I can watch previews, but when I go to rent, it stays on the spinning wheel with the Accessing iTunes Store forever. I've left it going for at least 4 or 5 days. I can rent from my iMac, but all I have is the headphone, analog, 2-channel audio feed and not the true digital surround. It sounded much better from the appletv. HELP!

Read a bunch of posts from 2008 and 2010. The only step I found that I hadn't tried was the ol' plug pull. After that, I got the first movie I tried renting. ??? At least it works now.

How to join the results from 2 webservices using BPEL?Architecture question

Hi,
I am new to BPEL. BPEL process calls two webservices, which return complex results. I need to process the results from 2 webservices using BPEL .The result will be a complex xml, join/merge of previous results.
What is the best practice to do it with BPEL?
I see three ways:
1.To do the processing (join/ merge) inside the BPEL process itself and return complex xml.
2.Develop auxiliary webservice in java. Auxiliary webservice will do the processing (join/merge). Call this webservice from BPEL process.
3.Do a plain concatenation of the two XMLs in BPEL and forward it to the frontend. Frontend then will do all the logic on its side
Thanks,
Boris

you could process the XMLs one at a time, and use XSL transformations to process the payload to a target schema.
Activity 1:
output from webservice1 -> transform 1 -> partial XML (of target schema)
Activity 2:
output from webservice2 -> transform 2 -> completed XML (of target schema)
Regards,
Shanmu.

How can i keep my music from my iPhone and sync it my new macbook? Only purchased music seems to be available to sync, even though the rest of the music was uploaded from CD's on my last laptop.

Hi, I have changed from an old laptop to a macbook air. how can i keep my music from my iPhone and sync it my macbook? Only purchased music seems to be available to sync, even though the rest of the music was uploaded from CD's on my last laptop.
As I can't upload CD's onto the Macbook Air, how do I keep the existing music on my iphone syn onto my new macbook without deleting all the cds on the iphone??
Many thanks!

Hi RaulRod,
Are you pressing the Sync button to transfer music after connecting your iPhone or do you have the option checked to 'Automatically Sync when the iPhone is connected?'
Have you tried manually dragging and dropping music from your library into your phone?

How to export the result from executing sql statement to excel file ?

HI all,
Great with Oracle SQL Developer, but I have have a trouble as follwing :
I want to export the result from executing sql statement to excel file . I do easily like that in TOAD ,
anyone can help me to do that ? Thanks so much
Sigmasvn

Hello Sue,
I just tried to export to excel with the esdev extension and got java.lang.NumberFormatException. I found the workaround at Re: Windows Multi-language env, - how do I set English for application lang?
open the file sqldeveloper\jdev\bin\sqldeveloper.conf and add the following two lines:
AddVMOption -Duser.language=en
AddVMOption -Duser.country=USyet now my date formats in excel are 'american-style' instead of german. For example 01-DEC-01 so excel does not recognize it as date and therefore I can not simply change the format.
When export to excel will be native to 1.1 perhaps someone can have a look at this 'feature'
Regards
Marcus

In VB how do I pass my low and high limit results from a TestStand Step into the ResultList and how do I retrieve them from the same?

I am retrieving high and low limits from step results in VB code that looks something like this:
' (This occurs while processing a UIMsg_Trace event)
Set step = context.Sequence.GetStep(previousStepIndex, context.StepGroup)
'(etc.)
' Get step limits for results
Set oStepProperty = step.AsPropertyObject
If oStepProperty.Exists("limits", 0&) Then
dblLimitHigh = step.limits.high
dblLimitLow = step.limits.low
'(etc.)
So far, so good. I can see these results in
VB debug mode.
Immediately after this is where I try to put the limits into the results list:
'Add Limits to results
call mCurrentExecution.AddExtraResult("Step.Limits.High", "UpperLimit")
call mCurrentExecution.AddExtraResult("Step.Limits.Low", "LowerLimit")
(No apparent errors here while executing)
But in another section of code when I try to extract the limits, I get some of the results, but I do not get any limits results.
That section of code occurs while processing a UIMsg_EndExecution event and looks something like this:
(misc declarations)
'Get the size of the ResultList array
Call oResultList.GetDimensions("", 0, sDummy, sDummy, iElements, eType)
'Step through the ResultList array
For iItem = 0 To iElements - 1
Dim oResult As PropertyObject
Set oResult = oResultList.GetPropertyObject("[" & CStr(iItem) & "]", 0)
sMsg = "StepName = " & oResult.GetValString("TS.StepName", 0) & _
", Status = " & oResult.GetValString("Status", 0)
If oResult.Exists("limits", 0&) Then
Debug.Print "HighLimit: " & CStr(oResult.GetValNumber("Step.Limits.High", 0))
Debug.Print "LowLimit: " & CStr(oResult.GetValNumber("Step.Limits.Low", 0))
End If
'(handle the results)
Next iItem
I can get the step name, I can get the status, but I can't get the limits. The "if" statement above which checks for "limits" never becomes true, because, apparently the limit results never made it to the results array.
So, my question again is how can I pass the low and high limit results to the results list, and how can I retrieve the same from the results list?
Thanks,
Griff

Griff,
Hmmmm...
I use this feature all the time and it works for me. The only real
difference between the code you posted and what I do is that I don't
retrieve a property object for each TestStand object, instead I pass the
entire sequence context (of the process model) then retrieve a property
object for the entire sequence context and use the full TestStand object
path to reference sub-properties. For example, to access a step's
ResultList property called "foo" I would use the path:
"Locals.ResultList[0].TS.SequenceCall.ResultList[].Foo"
My guess is the problem has something to do with the object from which
you're retrieving the property object and/or the path used to obtain
sub-properties from the object. You should be able to break-point in the
TestStand sequence editor immediately after the test step in question
executes, then see the extra results in the step's ResultList using the
context viewer.
For example, see the attached sequence file. The first step adds the extra
result "Step.Limits" as "Limits", the second step is a Numeric Limit (which
will have the step property of "Limits") test and the third step pops up a
dialog if the Limits property is found in the Numeric Limit test's
ResultList. In the Sequence Editor, try executing with the first step
enalbled then again with the first step skipped and breakpoint on the third
step. Use the context viewer to observe where the Limits property is added.
That might help you narrow in on how to specify the property path to
retrieve the value.
If in your code, you see the extra results in the context viewer, then the
problem lies in how you're trying to retrieve the property. If the extra
results aren't there, then something is wrong in how you're specifying them,
most likely a problem with the AddExtraResult call itself.
One other thing to check... its hard to tell from the code you posted... but
make sure you're calling AddExtraResult on the correct execution object and
that you're calling AddExtraResult ~before~ executing the step you want the
result to show up for. Another programmer here made the mistake of assuming
he could call AddExtraResult ~after~ the step executed and TestStand would
"back fill" previously executed steps. Thats not the case. Also, another
mistake he made was expecting the extra results to appear for steps that did
not contain the original step properties. For example, a string comparison
step doesn't have a "Step.Limits.High" property, so if this property is
called out explicitly in AddExtraResult, then the extra result won't appear
in the string comparison's ResultList entry. Thats why you should simply
specify "Step.Limits" to AddExtraResul so the Limits container (whose
contents vary depending on the step type) will get copied to the ResultList
regardless of the step type.
I call AddExtraResult at the beginning of my process model, not in a UI
message handler, so there may be some gotcha from calling it that way. If
all else fails, try adding the AddExtraResult near the beginning of your
process model and see if the extra results appear in each step's ResultList.
Good luck,
Bob Rafuse
Etec Inc.
[Attachment DebugExtraResults.seq, see below]
Attachments:
DebugExtraResults.seq ‏20 KB

How do I keep my installer from trying to update with Photoshop instead of installer? Quark can't update because the installer opens Photoshop which doesn't recognize the file and I'm not given the option to choose anything else.

How do I keep my installer from trying to update with Photoshop instead of installer? Quark can't update because the installer opens Photoshop which doesn't recognize the file and I'm not given the option to choose anything else.

1. Sync wasn't intended to be used in that manner. You would be better off carrying around a USB Flash Stick with Portable Firefox for use on "strange" PC's.
2. You could open the "Library" {Ctrl + Shift + B} and highlight all those bookmarks and then delete them all at once. But that would also delete all the other bookmarks, and it isn't foolproof. All another person would need to do it to '''''restore''''' a bookmark backup file that has your bookmarks. Beyond that, a new Profile could be created and then the current Profile deleted; but that's "messing with" someone else's computer - an action that is worthy of terminating a friendship over, IMO.
And if that "public" computer was set up properly, Sync should have been disabled.

How to dispatch the result from test cases to the function that loads

Hi ,
     I am currently working on writing a test case and i ant to execute the test case and the result of the test cases needs to be returned to function that loads the swf file using loader.
Below is the structure
1) Project A
         Has a action script file that has a loader which inturn loads the swf file.
public function testRunner():void {
            loader = new Loader();
            loaderDispatcher = loader.contentLoaderInfo;
            sharedEvents = loaderDispatcher.sharedEvents;
            parentURL = loaderDispatcher.loaderURL;
            parentDomain = URLUtil.getServerNameWithPort(parentURL);
            parentScheme = URLUtil.getProtocol(parentURL);
            load("http://localhost:8000/abc.swf");
    var callback:Function = addAsync(onMessage, 30000, {}, handleTimeout);
    sharedEvents.addEventListener("message", callback);
    /*Listener added to receive message event*/
    sharedEvents.addEventListener(MessageEvent.MESSAGE, onMessageEvent);
        private function load(location:String):void {
            // create SWF loader
            loaderDispatcher.addEventListener(Event.OPEN, onOpenEvent);
            loaderDispatcher.addEventListener(Event.INIT, onINIT);
            loaderDispatcher.addEventListener(HTTPStatusEvent.HTTP_STATUS, onStatus);
            loaderDispatcher.addEventListener(Event.COMPLETE, onComplete);
            loaderDispatcher.addEventListener(IOErrorEvent.IO_ERROR, onError);
            loaderDispatcher.addEventListener(Event.UNLOAD, onUnload);
            loaderDispatcher.addEventListener(Event.CLOSE, onClose);
            var request:URLRequest = new URLRequest(location);
    //request.idleTimeout = 8000;
    try{
loader.load(request);
_subMovie.addChild(loader);
       catch (error:Error)
                 trace("Unable to load URL: " + error);
            // listen for DISPATCH events
            sharedEvents = loader.contentLoaderInfo.sharedEvents;
    sharedEvents.addEventListener(DISPATCH_EVENT_TYPE, handleDispatch);
2) Project B
      Project B has the test cases written and teh swf file for this project is abc.swf.
test.mxml
public function go():void {
var core:FlexUnitCore = new FlexUnitCore();
core.addListener(new TestCaseListener());
core.run(ABCTest);
var messageEvent:MessageEvent = new MessageEvent("message","action test","action testing");
//loaderInfo.sharedEvents.dispatchEvent(messageEvent);
When I load abc.swf file this inturn call the mxml file which runs the testcases by using the FlexUnitCore .
What I am looking for is dispatching the result that is available in TestcaseListener to the call of loader ie; in Project A
public class TestCaseListener extends RunListener {
public override function testRunFinished(result:Result):void {
trace("testRunFinished invoked 1 ::");
trace("failureCount::"+result.failureCount);
trace("failures::"+result.failures);
trace("successful::"+result.successful);
Is there any way in which i can dispatch the result from testcaselistener to the call where this swf file is loaded .

Hello Sue,
I just tried to export to excel with the esdev extension and got java.lang.NumberFormatException. I found the workaround at Re: Windows Multi-language env, - how do I set English for application lang?
open the file sqldeveloper\jdev\bin\sqldeveloper.conf and add the following two lines:
AddVMOption -Duser.language=en
AddVMOption -Duser.country=USyet now my date formats in excel are 'american-style' instead of german. For example 01-DEC-01 so excel does not recognize it as date and therefore I can not simply change the format.
When export to excel will be native to 1.1 perhaps someone can have a look at this 'feature'
Regards
Marcus

How do I keep my Imessages from being viewed on other devices under my apple ID?

How do I keep my Imessages from being viewed on other devices under my apple ID?

No, you can authorize any number of email addresses on your Apple Id and then select one of those to use as an alternate Send and Recieve for Messages. It isn't necessary to use seperate AppleIDs. I use my phone number on my iPhone and an email address on the iPad.

How do i keep the results from a formula but delete the original data

Similar Messages

Maybe you are looking for