How do I keep the settings in color range/quick mask from reverting?

When I use Color Range, I like to use Quick Mask as the selection preview, and I like to use the quick mask to show the selected area. Since upgrading to CC, these settings don't seem to stick -- every time I open up color range, the selection preview defaults to "none", and the quick mask setting is defaulting to show masked areas. This is a pesky two-step process to set up and it used to stay as the default setting once I set it up the first time. Is there a way to make the current settings "stick" for use with the next file?

I just did a short SR test, first I exported to 480p, then I saved the file. Now I have 2 files one 11.9mb (export) and the other 42.8mb (save). I then took the save file and performed an export on it to 480p.  Guess what, it saved at 11.9mb.  So it seemed to save me 3/4 of the space.  Lets see what happens with a 17 minute SR.  Thanks!
Any suggestions on getting the sound louder with the SR?
For anyone else ever seeing this post, for me the best was using an external speaker whether wired or bluetooth, facing the left side of the computer where the internal mic hole is.   Good Luck!

Similar Messages

  • I had to re-download itunes for my computer, how do I keep the songs that I did not buy from itunes?

    I had redownload itunes because I had to get a new harddrive for my computer. Some of the songs from my ipod are not purchased from itunes. They are from cds and songs I have downloaded from the computer. How do I keep those from being erased when I sync my ipod onto itunes?

    Ideally you should restore your library from a recent backup - hard drives fail, usually without warning, so you should always maintain a backup of all data that you value.  Otherwise, see turingtest2's user tip on Recover your iTunes library from your iPod or iOS device.

  • How can I keep the file/ album names when copying music from the Finder to iTunes?

    Hi,
    Is there a possibility to keep the file names one uses in the Finder when adding music to iTunes?
    [e.g. that a Beethoven symphony still ends up under 'Beethoven/ symphony No./' and not under the name of the orchestra/ dirigent]
    Thanks in advance
    Kath

    Yes.  Go into Preferences and make sure that "Keep..." and '"Copy..." are both not checked.  Then put the file(s) where you want them (preferably somewhere in your iTunes Media folder) and use the command File > Add File (or Folder) to Library.
    Try this first with a file or two so you can see that it keeps the same file name as it adds to your library.

  • How do I keep the original background color in a Keynote presentation after PDF?

    My Keynote presentations have a grey background. But when I convert to PDF, it turns to black. Help?

    Hi jvtennis,
    What are you using to convert your file to PDF? Are you using Acrobat or "printing" to PDF from Keynote?
    Regardless, one thing to check is that you have Show Large Images selected in the Page Display settings in Acrobat or Reader.
    Best,
    Sara

  • How do you keep the settings on the home page from changing?

    On my firefox home page it was set to no graphics, now it's changed to a simulation of the game space invaders.
    This is the same type of thing that Yahoo, aol, google ALL do. I was under the impression you DO NOT do this type of stuff. I guess I was wrong!

    To narrow the search for the problem -
    Try opening Firefox in Safe Mode by holding down the Shift Key as click on the Firefox icon,
    and try re-setting your Home page via Options>General>When Firefox starts Show a blank page.
    Does the problem persist in either of these two cases?
    Do you have any extensions or third-party toolbars.?
    Have you tried a malware scan?

  • How do I keep the name tags in Picasa Web Albums from appearing on the images by default? With Explorer, name tags only appear when mousing over the image, but with Firefox, all the tags appear on the picture as soon as it is loaded, which looks messy.

    I use Picasa to create web albums, and I tag people who appear in the pictures. With Explorer, the name tags do not appear on the pictures until I mouse over a specific person, at which point the tag appears. With Firefox, the name tags appear as soon as the picture is loaded, and only disappear when you mouse over the people in the picture. This makes the picture look messy; by default, one would want to see a picture without tags all over people's faces.
    The only way to "fix" this is to disable the name tags completely (or tell people to use Explorer!), but this is not an ideal solution, since I would like to be able to share albums with people's names in them.

    I use Picasa to create web albums, and I tag people who appear in the pictures. With Explorer, the name tags do not appear on the pictures until I mouse over a specific person, at which point the tag appears. With Firefox, the name tags appear as soon as the picture is loaded, and only disappear when you mouse over the people in the picture. This makes the picture look messy; by default, one would want to see a picture without tags all over people's faces.
    The only way to "fix" this is to disable the name tags completely (or tell people to use Explorer!), but this is not an ideal solution, since I would like to be able to share albums with people's names in them.

  • How can I change the Settings to Full range in AE?

    I need to work in my new project in Full range. Is there any way to change the import-, project- and rendersettings to Full range?
    Thanks Ali

    Hi Todd,
    we are working with Alex Prores 4444. For some VFX-shots we made pregradings. After finishing the work in AE and exporting Prores 4444 and re-importing the files in "Baselight", the saturation and Gamma was not the same like the once we exported. So now we are looking for a solution for this problem. And some people were saying, that this is becouse we are working with legal and not Full-range. That is the reason why I would like to find out correct the workflow in Fullrange.
    Thanks
    Ali

  • How do I keep the music screen on after nano "wakes" from going to sleep?

    When I'm playing music and my 7 gen nano goes to sleep, it'll awake to the home screen, not the music screen it went to sleep with. This is really annoying, especially when I'm on a walk or something. I tested my friend's identical iPod and hers stays on the music screen when it wakes. Any solutions? Thank you.

    I have the same problem (deleted email account). I think I mistakenly set up an account when I was buying an Apple product online, not realizing that it would be the same ID as my iTunes.
    What is the way to actually contact Apple?
    I have been clicking around in circles for hours! Will I have to pay them to resolve this? I don't have any products still have applecare . . .

  • How to keep the settings of leica t after import the photo??

    After import the photo(.dng, by leica t), it looks very different!
    This is the original photo before the importing(preview in the import dialog):
    And the following is the picture after importing:
    Brighter, and different color!
    It seems like the settings of leica t is not be kept.
    I want to keep the settings of leica t, just like the preview in the import dialog!
    Does anyone knows how to do it?

    h.t.justfal wrote:
    I want to keep the settings of leica t, just like the preview in the import dialog!
    Does anyone knows how to do it?
    Can't be done.
    What you see when you first open a file in Lightroom is the jpeg preview from the camera that's embedded in the Raw file: after a few seconds Lightroom generates its own preview, with the effect you describe.
    There's no way round this - you'll have to adjust Lightroom's settings to resemble the in-camera results you want, and save the settings as the new defaults.

  • How can i keep the optimize settings in Muse

    Hello
    I just uploaded a web site www.coopdebici.com
    I was very carefully optimizing the images in adobe photoshop, and make them always at 100%.
    When the web site was oline i takes a lot to charge some images and i just realized that Muse increase a lot the file size of most of them!
    So, how can i keep the original optimize settings?
    I don't want to replace the images manually using ftp
    Help me please
    Sebastián

    I just realized what happens.
    I see that some images keep the original names an its compression and size, but other images doesn't.
    The "problem" is with the round corners that i used, the original images are in jpg, but in order to make the round corner the Muse convert them in to png and it increases a lot the file size.
    This can be helpful for you

  • Hi: I got my ipod in 2011 and synced it to my old computer. The music that Is on it is from imported cd, so I cannot transfer purchases to my new computer. I also want to keep the settings, favourites, folders, and information that is on my ipod. How do i

    Hi: I got my ipod in 2011 and synced it to my old computer. The music that Is on it is from imported cd, so I cannot transfer purchases to my new computer. I also want to keep the settings, favourites, folders, and information that is on my ipod. How do i sync it to new computer? Please Help.

    You will also have to copy the iPod backup file to the new computer and then restore your iPod from backup using that backup. The file is located here:
    iTunes places the backup files in the following places:
    Mac: ~/Library/Application Support/MobileSync/Backup/
    Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    Note: If you do not see the AppData or Application Data folders, you may need to show hidden files (Windows XP,  Windows Vista and Windows 7), or iTunes may not be installed in the default location. Show hidden files and then search the hard drive for the Backup directory
    You can also  make a backup on the new computer by conneting the iPod and right clicking on the iPod under Devices in iTunes and selecting BackUp. When you retore from backup sometime the app folder structure get messed up.

  • The auto play for videos resets everytime a new video starts, how can I get it to keep the settings I want?

    Every time a new video plays, it resets the settings to the default. How can I change the settings for video playback?

    Using a plugin ''(and which one)'' or with HTML5 < Video > ?

  • How do I restore the settings for apps using Time Machine?

    I believe there are problems with items within the Library Folder inside the System Folder.  For example, there are two "Frameworks" Folders, but one has "(from old Mac)" after its name.  I dare not try to remove or even move either.
    Back in the day of OS 9, you could modify something, then search for it by "Last Modified" Date, and find where Apple has hidden itscontents.  It's not so easy in OS X.  I've had some success using Pondini's Time Machine FAQ's, though.  Here is how I got to this problem:
    Our family MacBook died.  After getting a repair estimate of $500 to $700 "if it's the Logic Board," we decided to replace it.  We purchased a MacBook Pro running Lion.  (Later, we brought it to an Apple Store and were quoted $435 in house or $280, but they would have to send it out.  Incredible repair: Logic Board, Top & Bottom Case, Super Drive, Battery, all for $280.  No wonder they're #1).  I pulled the Hard Dive out, erased it, and installed an older operating system, but during the repair they installed 10.6.
    Restored the MBP from the TM backup of the MacBook. OK
    The Macbook is repaired and the store showed me how to restore the data from the TM backup.
    Restart and the passwords do not work due to restoring a 10.6 machine from a 10.7 backup.
    Tech support guides me through resetting an admin password using the password utility on the install DVD.
    changed the other passwords inside of Accounts in System Preferences.  Then changed the password or the other Admin.
    Restart, get a circle with a line through it.
    Tech support guides me through fixing this.
    Restart, half my Apps do not work.
    Tech support says to re-install 10.6.
    I did but I thought it would erase and install but it just re-installed 10.6.
    Most Apps work, except iPhoto.  Mail is OK sending but only receives on one of 3 accounts.
    Is there a fix for iPhoto & Mail?  If not, I would plan to erase and use the finder to drag the user folders from TM to the MacBook.  Can I just drag the Apps too?  How about all of the settings for those Apps?

    If you don't keep a backup, you can't restore your machine to any state except the state in which you received it, brand new, with none of your own stuff on it. That makes a pretty convincing argument for backing up, doesn't it?

  • I have the iCloud Photo Library (Beta) turned on. The photos from my iPhone do get uploaded to the iCloud. The photos are then downloaded to my wife's iPhone (we share the iCloud account). How do I keep the photos from downloading to my wife's iPhone

    I do not want all the photos from my iPhone downloading to my wife's iPhone from iCloud? We share an iCloud account. How can I prevent the download to my wife's iPhone from iCloud. .The "Upload to My Photo Stream" is turned off on my iPhone. . I am running 8.1.3. 
    I have a related question. In order to same space on my iPhone is there a way to upload the photos to the iCloud and then delete them from my iPhone.

    The way to keep the photos from downloading to your wife's phone would be for her to go to Settings > iCloud > Photos > and turn off iCloud Photo Library. If that isn't an option, the other option would be for her to have her own Apple ID ( and possibly explore the new family sharing options https://www.apple.com/ios/whats-new/family-sharing/ )
    Regarding the "related question" see the quotes below from iCloud Photo Library beta FAQ - Apple Support
    Deleting a photo or video from your Photos app will also remove the item from iCloud Photo Library and from your iCloud storage allocation. Photos and videos you remove can be recovered from the Recently Deleted album for 30 days. After 30 days, your content will be removed from the Recently Deleted album.
    If you want to reduce the space used by photos on your phone, rather than deleting them see the following:
    How does iCloud Photo Library save space on my device?
    If you turn on Optimize [device] Storage, iCloud Photo Library will automatically manage the size of your library on your iOS device, so you can make the most of your device's storage and access more photos than ever. iCloud Photo Library stores the original, high-resolution photos and videos in iCloud and can keep lightweight, device-optimized versions on each of your devices. As long as you have enough storage, recent photos and videos that you access the most will stay on your device at full resolution.
    You can turn on Optimize [device] Storage from Settings > iCloud > Photos or Settings > Photos & Camera > iCloud Photo Library on your iPhone, iPad, or iPod touch. You need an Internet connection to access an original photo or video that’s stored only in iCloud.

  • I like the feature of the PDF being opened on the new tab on firefox browser windows. But the newer version (3.6 or 4.0) will automatically open PDF in a pop up adobe apps. How do I keep the PDF open on the new tab as before? thank you

    I like the feature of the PDF being opened on the new tab on firefox browser's windows. But the newer version (3.6 or 4.0) will automatically open PDF in a pop up adobe apps. How do I keep the PDF open on the new tab as before like the 3.5 ver.? I want the PDF opened in the new tab rather than in the Adobe's app's pop up window. Could you help?
    thank you

    '''I fixed mine by removing the Ask.com extension.'''
    Tools
    Add-ons
    Settings icon
    View Recent Updates
    Ask.com '''DISABLE'''
    Running FF 8.0 on Windows 7 (64-bit)

Maybe you are looking for