How do i keyframe 3D movement?

I am using motion 3, i am trying to keyframe a 3D movement so it is 2d then goes into 3D. I can't find out how or find any youtube tutorials. Does any have a link to a video tuorial? thanks

Look in the on line Help files included with Motion 3, I think it starts around page 95.
The Z axis of your work is represented in the Keyframe editor in the same way as the X and Y axes.

Similar Messages

How I make my BLURS move in the video?

I want to know how I make "Blurs" move in the video. The image in the video has obviously movement and I need to put a Blur in some part and I want that blur keep moving along that clip go off.
???

In the Viewer check out the Motion Tab.
Place your blur where you want it in the frame. Double click it in the Timeline. This will open it in the Viewer. Go to the Motion Tab and then click the little Diamond shaped thing to the right of Center. This will place a Keyframe.
Move forward in your Timeline, adjusting the placement of your blur in the Canvas. This should add more keyframes as you reposition the blur.
That's really basic overview. Hope it helps!
~Luke

How do I make multiple movies look like one?

I created a demo of 136 slides with mostly screencaps and one
small flash animation. The final published flash file is
approximately 30MB. When the demo is run on multiple computers, the
CPU utilization rises up to almost 100%, this makes the demo run
very slowly on most computers. I was advised to cut my captivate
movie in half ( in slides)... however even then the CPU utilization
is quite high. How can I break my demo into multiple linked movies
(to bring down the file size) but still have it play smoothly
without it stopping to load after each new movie? How do I make
multiple movies look like one?
Thank you.

Would it work to make the navigation of the page go to the
next movie?

How do I delete a movie from my iPhone 5s

How do I delete a movie from my iPhone 5s. I have tried swiping it to get a delete message, but it's not working. Help!

HI,
is it a movie you have shot yourself or is it one you have downloaded?
if it's a download then you need to uninstall via iTunes, just uncheck the movie and then sync,
if it is one you have shot yourself then :
Tap select top right: tap the video you want to delete: tap the bin.
good luck and hope this helps.

HT1657 How do I Sync a movie rental with my iPhone?

How do I Sync a movie rental from my computer with my iPhone?

Welcome to the Apple community.
You cannot transfer any content to the Apple TV 2 or Apple TV 3, you can transfer rentals to the first generation Apple TV however,using the information provided on this page.

How can I set the movies I have put into itunes so that they do not sync each time I try to sync new music purchaes?

I can uncheck tv shows and when I sync music or app purchase the tv shows do not sync unless they are marked us unwatched. I have put digital copies of some blu-rays into itunes and I cannot get them to be in itunes without syncing when sync new purchases. How can I keep the movies in itunes for storage but keep them from going to the device and taking up memory when I am not needing them?

Just untick Sync Movies or change the drop down below to selected movies.
tt2

How do I delete a movie (not bought from iTunes) and have it actually deleted from the library as well?

How do I delete a movie (not bought from iTunes) and have it actually deleted from the library as well, I keep deleting stuff from iTunes to try and free up some space only to find the file still in the library?

It depends upon what preferences settings you use. Most people use default settings so when you delete an item it asks you if you want to get rid of the file too.
If iTunes absolutely refuses to get rid of the file (I have never heard of this by the way) you can always go to the media folder or wherever the file is located and drag it to the trash yourself.

Automator - How do I: Mouse Click, Move Windows, and more

Hello,
I am attempting to create my own Automator programs and for a while I had some that worked nicely. I have recently been tweaking my iMac so that it can "think" on its own (by automator of course) and do things for me. However, I've run across a block with Mavericks (I believe it's due to Mavericks).
1. How can I get Automator to register a mouse click? "Watch me do" does not seem to want to work for me at all. I also would prefer if it would just be a registered mouse click, but not actually use the mouse (I know this is possible) so that if I'm doing something and it runs, it won't disturb my mouse and I can keep working.
2. How can I register a keyboard stroke? Same as above
3. How can I have automator move windows? I have two monitors and there are times when I may want it to move a window from one mintor to another
The following is a list of all the things I'm attempting to accomplish at the moment (with other things when I think of them) with automator (either through applications, folder actions, or ical actions):
1. Register a mouse click at a given area or on a given element in a safari page
2. Register a keyboard stroke in a given program (be able to focus on a program and then do the keystroke)
3. Move windows from one location to another
4. Full-screen and Un-full-screen iTunes at certain times of day
5. Download all purchased items on iTunes that aren't on the computer (sometimes iTunes doesn't download stuff if it was downloaded on my MacBook Pro first)
6. Automatically voice read reminders (that I've set in Reminders) each day at a given time (I can use loop to repeat it to make sure I hear it all)
I'll think of more of course, but the mouse click, keyboard stroke, and moving windows is the big thing I'm trying to figure out how to do. Can anyone help?
Also, I am not a computer tech. I am tinkering with this because it's fun and helpful, but an answer of "just use applescript" or "just use java" will likely just give me a headache. I know that it's going to be one of those codes, but I'm hoping someone has a "base" code that can be copied and pasted that's just a standard click that I can adjust for where I need to click and what process I need to click on.
If there is an Action Pack that includes a "Register Mouse Click" and/or "Register Keyboard Stroke", then that would work great, but the only action packs for automator I've seen that work with Mavericks is for photoshop.

You're asking for a lot in one post. It would be better to break your requests down a bit.
For example, to deal with mouse clicks, you can use the Automator Action Run Shell Script with this python script:
import sys
import time
from Quartz.CoreGraphics import *
def mouseEvent(type, posx, posy):
        theEvent = CGEventCreateMouseEvent(None, type, (posx,posy), kCGMouseButtonLeft)
        CGEventPost(kCGHIDEventTap, theEvent)
def mousemove(posx,posy):
        mouseEvent(kCGEventMouseMoved, posx,posy);
def mouseclick(posx,posy):
        mouseEvent(kCGEventLeftMouseDown, posx,posy);
        mouseEvent(kCGEventLeftMouseUp, posx,posy);
ourEvent = CGEventCreate(None);
# Save current mouse position
currentpos=CGEventGetLocation(ourEvent);
# Click the "Apple"
mouseclick(25, 5);
# 1 second delay
time.sleep(1);
# Restore mouse position
mousemove(int(currentpos.x),int(currentpos.y))
It will look like this in Automator:
To drag something (i.e. a window, a file icon) from position 40,60 to 60,300:
import time
from Quartz.CoreGraphics import *
def mouseEvent(type, posx, posy):
           theEvent = CGEventCreateMouseEvent(None, type, (posx,posy), kCGMouseButtonLeft)
           CGEventPost(kCGHIDEventTap, theEvent)
def mousemove(posx,posy):
           mouseEvent(kCGEventMouseMoved, posx,posy);
def mouseclickdn(posx,posy):
           mouseEvent(kCGEventLeftMouseDown, posx,posy);
def mouseclickup(posx,posy):
           mouseEvent(kCGEventLeftMouseUp, posx,posy);
def mousedrag(posx,posy):
           mouseEvent(kCGEventLeftMouseDragged, posx,posy);
ourEvent = CGEventCreate(None);
# Save current mouse position
currentpos=CGEventGetLocation(ourEvent);
# move mouse to upper left of screen
mouseclickdn(40, 60);
# drag icon to new location
mousedrag(60, 300);
# release mouse
mouseclickup(60, 300);
# necessary delay
time.sleep(1);
# return mouse to start positon
mouseclickdn(int(currentpos.x),int(currentpos.y));
For keystokes in AppleScript (which can be added to Automator with the Run Applescript Action) see: http://dougscripts.com/itunes/itinfo/keycodes.php

How do I download a movie to my phone? when I click 'rent' through itunes, I get a message that there is not enough available local storage, but I can manage my local device storage usage in 'Settings'. I have activated icloud, but this has not helped.

How do I download a movie to my iphone 3G? When I click 'rent' in itunes, I get a message that there is not enough available local storage, but I can manage storage on my device in 'Settings'. I have activated icloud, but don't know how to change my storage so that I can rent and watch the movie on my phone. thanks for any help you can give.

I always do my Rentals with the itunes program on the computer.
Make rental from itunes store. It will show in movies under library, DO NOT click to play it. Plug in the device to the computer. Click the name of the device on left. Click on movies. There is an option to copy to the device. Sync. obviously you still need space on ipad to put rental but you can have it take computers hard drive space until you need it.

How do you select and move more than one bookmark at a time? Shift+Click does not select multiple items that are next to one another in a list because the item

How do you select and move more than one bookmark at a time?
Shift+Click does not select multiple items that are next to one another in a list because the items open in firefox before this happens.

Use the bookmarks library. You may use Shift +Click, and Ctrl + Click to create groupings of selected bookmarks to drag and drop.
* one method of opening the bookmarks library is keyboard shortcut <br /> Ctrl+Shift+B (Windows)
*see also [[How to use bookmarks to save and organize your favorite websites]]
*and [[Use bookmark folders to organize your bookmarks]]

How can I burn a movie to dvd when I don't have iDVD on the new macbook pro?

I have recently purchased a macbook pro and I have made a movie in iMovie, however i don't have iDVD as it no longer comes on macs so how can I burn this movie to DVD without this program? Is there a program already on my laptop or do I need to purchase one and if so what can I purchase?

ToastTitanium from roxio
http://www.roxio.com/enu/products/toast/titanium/overview.html?ClickID=dxsztmmzk 0ookbzn2brmtsr2hcomcnhysxrs

How do I search for movies in the videos app

We just got an iPad 2 and I can't see how to search for a movie in the videos app.
We do not have any movies on the iPad, but wIth home sharing running I can see our extensive movie library. However the only navigation is swiping up and down through a list of cover art. With 400+ movies in iTunes it can take a while to scroll down to Zombieland or Zulu... Spotlight doesn't search the home sharing stuff.
I don't even see movie names in text under the cover art, or the normal quick scroll letter down e side of the page like you see in other iOS apps. It just seems very un-Apple and un-iOS.
I feel like I am missing something, some setting to make the movies interface more user friendly.
I'd appreciate any help or advice here
- Rick

I don't see any way either, but it is a Version 1.0 of Home Sharing.
Tell Apple you want a search capability here: http://www.apple.com/feedback/ipad.html

How do I import or move multiple selected photos to an existing album in iPhoto 9.6? In previous versions I could select and drag multiple photos into an album. Now I can only move one photo at a time. Help!

How do I import or move multiple selected photos to an existing album in iPhoto 9.6? In previous versions I could select and drag multiple photos into an album. Now I can only move one photo at a time. Help!

Try this general troubleshooting procedure:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder: User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks and Yosemite, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.

I recently brought a new HP laptop and I downloaded the newly updated iTunes on it; however I have an old Aver laptop with iTunes version 10.7 on it or the one before iTunes 11 came out. How can I transfer my movies from the old version to the new one?

I recently brought a new HP laptop and downloaded iTunes 11 on it. My old laptop which is a Acer has iTunes version 10.7, I believe. I wanted to know, How can I transfer 18 movies from the old iTunes onto my new Itunes? It only shows the most recent two movies when I look at the purchases in my account. I had a lot of moves downloaded last year from the old version and would like some assistance on how to get all those movies into my iTunes 11 library. Thank you.

you should starting with copying the iTunes folder from your old laptop to the new one.
the iTunes folder is in your user profile Music folder.
it should go to the same location on the new laptop.
Provided that you have your media, music and movies in the default location, and you sign in to your apple ID and authorize your new computer (all in iTunes)
you should have all intact.
Post if any problems.

HT204370 My computer says "the disk Im trying to save to is full", which Im assuming is my computer. So, I tried to redeem a movie on my ipad, however, the movie code has already been redeemed so I cant redeem it again. How can I get the movie saved to

I just redeemed a movie through iTunes, however, my computer says "the disk I'm trying to save to is full", which I'm assuming means my computer is full. I tried to go on my iPad and just redeem the movie through that, but now it says the code has been redeemed, so I cant redeem it again. How can I put this movie on my iPad or iCloud?

Hello johnciti123,
Thank you for ordering a PlayStation Network currency card from Best Buy's eBay store. I am sorry to hear of the trouble you have had with it when you recently attempted to use it.
While I recognize this may not be what you were hoping to hear, I regret to inform you that Best Buy is unable to support currency cards after they have been sold. After we activate the cards for use we have no way to verify if or when they ever are, as this information is only available to the company for which the currency card is sold. In this case that is Sony and PSN. If there was anything that could be done, it would need to be from Sony. In this case it sounds like they are likewise taking the stance that they cannot verify who was authorized to use the code so they do not provide support either.
I am sorry there is not something else we can do. Please let us know if you have any additional questions in the future.
Sincerely,
Mike|Social Media Specialist | Best Buy® Corporate
Private Message

How do i keyframe 3D movement?

Similar Messages

Maybe you are looking for