How do I know if a Map of the UK has been installe...

Hi,
Going to the UK on tue (nephew going to Great Ormond St Hospital) and tried to install a UK Map,how can i check before i go that I have installed it right??
Jo
Solved!
Go to Solution.

If you have OVI Suite 3 installed on PC go to Maps and click above device icon on Maps & Guidance All on left of screen and should then display contents of device.
Whilst in OVI Maps application (Offline) if you zoom out from current position, rotate map and zoom back down on London until you get to street level then you know maps are present.
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

How do I know if my router is broken or has been hacked?

I have a WRT54G and it stopped working. It's wifi gives off a single but no one can connect to it, and neither can I. The only way I can get online is by directly hooking my computer into my modem. I've reset the factory defaults and made my domain name my isp (satx.rr.com) Are there any other settings I need to fill in so I can get online? Thanks.

1)connect the modem to the router's internet port and the computer to the port#1
2)from the wired computer ,access the router using http://192.168.1.1 .. the default login password is admin
3)on the web ui , click on the "mac add clone" subtab , enable it and click clone..save the settings and do a power cycle
4)go to the "status" tab and check whether it has a valid internet ip add
5)if there is one , try going online ..

How will i know if an itunes email gift card has been redeemed by the recepient? do i get a notification?

I just want to check if the iTunes email gift card has been redeemed (without directly asking the recepient themselves). Is there a way to check that? Would I get an email notificaiton when the gift card is redeemed?

You can't log into any site and see your account's balance. You can log into your account on your iPad via Settings > iTunes & App Store - on my iOS devices my balance shows at the bottom of, for example, the Featured tab in the App Store app under my account id (or you can view your account via Settings > iTunes & App Stores and it should show on the screen that you are taken to). You may not see anything if your account's balance is zero.
Not sure what you mean by relationship iTunes has to products. You can buy music, films, TV shows, audiobooks via the iTunes app on your iPad, and apps via the App Store app - what you buy will be tied to your iTunes account.

How do I get a new password when the account has been wiped

I have used master reset for password but no explanation as to how I get back into my emails etc

Is your question related to using the Master Password feature in Firefox?
https://support.mozilla.org/en-US/kb/use-master-password-protect-stored-logins
https://support.mozilla.org/en-US/kb/reset-your-master-password-if-you-forgot-it
If so, I hope you have your passwords saved elsewhere. ''From the 2nd KB page I linked - at the bottom ...''
'''Remember: Resetting your master password will remove all of your saved usernames and passwords.'''
If, not the Firefox Master Password - please explain the issue a little more completely.

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?

We use an add-on in one of our online solutions and we've identified a security vulnerability. The issue has been addressed in our latest add-ons and we would like to know how we may blocklist our previous player through a firefox update?

We use an add-on in one of our online solutions and we've identified a security vulnerability. The issue has been addressed in our latest add-ons and we would like to know how we may blocklist our previous player through a firefox update?

You can file a bug report to do that request.
http://developer.mozilla.org/en/docs/Bug_writing_guidelines

How can i find my ipod touch 5th g that has been stole (it does have icloud but it says that it needs internet connection) i dont know what to do now plz help

How can i find my ipod touch 5th g that has been stole (it does have icloud but it says that it needs internet connection) i dont know what to do now plz help

What To Do If Your iDevice or Computer Is Lost Or Stolen
If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T, Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. Lost or Stolen iPhone? Here’s What to do
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on MobileMe
3. OS X Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Third-party solutions for computers:
1. VUWER 1.5.4
2. Sneaky ******* 0.2.0
3. Undercover 4.7
4. LoJack for Laptops Premium Mac
5. STEM 2.1
6. MacPhoneHome 3.5

How can I know in which Tables are the fields stored

Hi,
In transaction FSE3 Display Financial Version
Statement Version, if I drilldown in details, I can
see Item No, Chart of Acc, From Accountm To Account D,
C.
when I do a F1 on the fields, I can see that it is a
structure. How can I know in which Tables are the
fields store?

Hi Ankit,
There are no rules or guidelines for finding the table but i will share some of the tips used generally.........but i am not sure if we can do it for a tree structure..but try anyways....
Double click on the structure name seen on the F1 pop up window...
in the structure screen, try to analyse the field which is very important something like a key in that set of fields or do the same for the fields which we feel are more important,then click on the domain for that field....once in the domain..click on the "where used list for the domain" on the top...
it will display a pop up -> select only "table" and then press "Tick/OK"..A list will be displayed with the data element and table name ..from this we need to find out the right one we need either by going for text of the table or going through each and every one
It takes time but does the job.....
Regards
Byju

How do I know if the program has been downloaded to another computer or not?

How do I know if the program has been downloaded to another computer or not? Also how do I know if it is the educational version or not?

What exactly? Your questions don't make much sense since you failed to provide an explanation what problem you actually have, what program you actually mean and so on. That aside, edu versions are technically not different from the normal programs, just their licensing is different.
Myleniumu

Hello .. I need to know please how do I know if some one got the access to my iCloud account and saw my phone contains ? Thanks

Hello .. I need to know please how do I know if some one got the access to my iCloud account and saw my phone contains ? Thanks

Ahmed8885 wrote:
but I was shocked when I log in using my account on my friend iPhone device and I was surprised that I started to receive and see all my photo stream loading to his phone !
Really? What did you expect was gonna happen when you logged in using YOUR APPLE ID/PASSWORD?
That's the way things are supposed to work.

On the Web Wiz Forum, id="gwProxy" ="" ="ifofjsCall==''jsCall;elsesetTimeout'jsCall',500;" id="jsProxy" ="" is added to every reply that I make. Safe mode cures it but how do I know which add-on is the problem?

When I go to a reply window, sometimes it almost looks like there is a little window/box appears (with the 6 dots that allows the size to be changed) It appears to be the cause of the string/code?
On the Web Wiz Forum, < id="gwProxy" ="">< ="ifofjsCall==''jsCall;elsesetTimeout'jsCall',500;" id="jsProxy" ="">
to be added once the reply is posted, to every reply that I make. Safe mode cures it but how do I know which add-on is the problem? I have 25-30 add-ons.

Disable all addons by going to Tools -> Addons and clicking the disable button in every entry under Extensions or Plugins panels.
Restart Firefox.
Confirm the problem isnt there.
Enable each addon one by one by going to Tools -> Addons and clicking the enable button in every entry under Extensions or Plugins panels, in such a way that each time you enable ONE addon, you RESTART the browser and see if the problem STILL happens.
AS SOON AS the problem happens, disable the last addon you enabled. That one is the culprit. You can now enable all the others, if needed.

How do i know what is downloading in the background of my ipad

How do I know what is downloading in the background. My wi fi is showing something is downloading, but I dont know where to look to see what exactly is downloading.
Also why does my iPad keep looking for wi fi spots when I have already selected and opened my wi fi ?

Check in Settings>iTunes & App Store>Automatic Downloads>Updates>On. If that is set to "On", any apps that require updates are being downloaded in the background. I turned it off on my iPad. Just another way to drain the battery IMO. I can update the apps when I am ready to do so and I can do when the iPad is plugged into power.
How do you know that the iPad is looking for WiFi hotspots?

I purchased the teacher and student lightroom 5. I put in my code and uploaded my evidence to show that I am a teacher. I am guessing it was sent through to someone. How do I know when I can use the software? I don't understand what to do next.

I purchased the teacher and student lightroom 5. I put in my code and uploaded my evidence to show that I am a teacher. I am guessing it was sent through to someone. How do I know when I can use the software? I don't understand what to do next.

Please refer below link for more information
Education FAQ

I just ripped quite a few music albums. How do I know if they went into the cloud, and if they did not, how do I get them into the cloud

just ripped quite a few music albums. How do I know if they went into the cloud, and if they did not, how do I get them into the cloud

I assume you have iTunes Match turned on in iTunes?
You can create a smart playlist in iTunes that has "iCloud Status" is "Matched" or "Upload" - that will tell you what's in the cloud.

Hi, for Iphone tips page "see when a message was sent " , then how do I know that the message has been read?

Hi,
for Iphone tips page "see when a message was sent " , then how do I know that the message has been read? Thanks

Hi Bhavesh,
Please see my replies inline:
> 1. If i remember your ealier thread correct also, I
> would suggest that you drill down in Where Did the
> Error Occur. Instead of no restriction, select
> Adapter Engine and also your Corresponding Adapter
> and then trigger the error message and check if the
> alert is triggered.
When I click on "Where did the error occur" -> "Adapter Engine", I do not have a choice of errors from the dropdown. I only see one option "*".
Is this right?
> 2. ><i>When I click on "Alert Inbox" ->
> "Subscription", I get a message "The table does not
> contain any entries". Is this correct?</i>
>
> Yes this is correct. You have defined in your alerts
> as the option as FIED RECIPIENTS. You also have
> options like Reciepients via User Role and
> Subscription Authorization in ALRTCADTDEF.
>
I see.
I've also managed to overcome this problem by selecting "Subscription Authorization" in the Alert Category Definition page, and entering SAP_XI_MONITOR as one of the roles.
After that, I am able to see a the alert category defined. By default it's already subscribed, because I'm using the same user - PISUPER.
I saw in another post that the option "Suppress Multiple Alerts of this Rule" should be left unchecked. I tried that, but I still do not see any alerts raised in ALRTDISP.
What did I miss?
Please help.
Thanks.
Ron

How do I know if a Map of the UK has been installe...

Similar Messages

Maybe you are looking for