How do I know if my brand new Mac mini (late 2012) really has Mac OS X 10.9 Maverick preinstalled?

How do I know if my brand new Mac mini (late 2012) really has Mac OS X 10.9 Maverick preinstalled, as stated when I bought it, without opening the box and booting the device? It says "Copyright 2012 Apple Inc." on one of the sides of the box, which makes me uncertain.
If it does not have Mac OS X 10.9 Maverick preinstalled I might have bought an old device, in worst case as old as a year or more.
/Birger

The late 2012 does have USB 3 !!
I specifically waited to purchase a Mac Mini
until USB 3 was made available.
Look at the diagram (picture) on the bottom of the box. The diagram that details which ports are available on the unit.
If you see 3 after USB.. then it is a late 2012 Mac Mini.
Looking at my box it clearly says USB 3.
I don't think there has been any changes to the Mac Mini since late 2012.
other than the pre-installed OS being Mavericks now..
You will want USB 3!!!
My box also indicates it is version 2.6 (just above the Airport ID).
(Mine is definitely a late 2012 model).

Similar Messages

Vmware fusion 5.0.2 cannot connect to network on my brand new iMac '27 late 2012

Dear friends,
I have tried to install Windows 8 (x64bit) Pro., Windows XP, and CentOS 6.0 using vmware fusion 5.0.2 over my brand new iMac '27 late 2012. However, neither one can connect to the Internet. There was no problem with the same installation on my iMac 2011.
The network board recognized by Windows 8 is Intel(R) 82574L Gigabit Network Connection.
In the folder of vmware fusion's setting files on Mac OS, I found a file called Windows 8 x64.vmx, and
there is a line as follows.
ethernet0.virtualDev ="e1000e"
Any friend has the same problem or can give me some hints?
Thanks a lot!

Suggest that you post your question here

Constant DNS Lookup from New Mac Mini Late 2012 Model i7

Just bought a new i7 Mac Mini ( late 2012 )...my first mac....the wifi connection is way too slow comparing to its installed bootcamp Windows 8 that I installed on it afterwards.
I started to track the ip and port that got queries in Mac Mini, I noticed that those applications are querying ports every 0.1 sec...those are
rsResponderDNS - port 53
Gamed - random port
And many other applications.
My question is if Mac installed some applications that is like HP computers with HP framework that constantly sending tracking data and Ad tracking back to Apple or something.
Very disapointed with my first mac, I felt like I bought a HP mac...
Currently I setup firewall rules to block most of the ports from going out...the firewall interface is a bit confusing too....normally, it should block all incoming ports for home users since it is not a server, but based on the firewall interface it is saying that the rules setup is allowing certain incoming ports...why would I open any incoming ports? I need to restrict outgoing port. Furthermore, if you check off block all outgoing port, it blocks everything even though there are rules setup in the firewall as white list.

It sounds like you installed something that used nsResponder, not rsResponder. Double check that.
https://developer.apple.com/library/mac/documentation/cocoa/reference/applicatio nkit/classes/NSResponder_Class/DeprecationAppendix/AppendixADeprecatedAPI.html
Says that part of code is deprecated on Mac OS X 10.8. Which suggests that you are using some old software expecting a code for nsResponder and can't find it in 10.8.
One software I know that will monitor network traffic is Little Snitch. But what I don't know is how to uninstall it. I would check with the developer of it, how to uninstall it before installing it, as it can slow down your network traffic even more. But at least it should be able to tell you what applications are attempting to network.

Mac Mini Late 2012, does anyone know what this error message means, 4mem/9/40000000:0x7a5c8f90

Mac Mini Late 2012, does anyone know what this error message means, 4mem/9/40000000:0x7a5c8f90

What was the Mac ding when you received that error?
Were you running Apple Hardware Test?
http://www.macissues.com/2014/03/21/how-to-run-and-interpret-apples-hardware-tes ts-on-your-mac/
Seems like a memory error.

I have right now mac mini (late 2012) i just want to know what you recommend iMac 24-inch 1299$ or the mac mini 599$

I have right now mac mini (late 2012) i just want to know what you recommend iMac 24-inch 1299$ or the mac mini 599$ leave your coment i have time until 24 january.

The following article may be of help.
http://support.apple.com/kb/ht3924
Oops, I see this article has been referred to already.
Message was edited by: John Lockwood

HT203697 My mac mini (late 2012) won't fully shut down, this happens all the time. How do i fix this?

My Mac Mini won't fully shut down. How do I fix this?

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the BOOT_TIME log message that corresponds to the last boot time when you had the problem. Now clear the search box to reveal all messages. Select the ones logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Help! Can't install SSD in my new Mac Mini Server (2012)

Previously I've purcahsed Mac Mini servers and removed one of the two drives, replacing it with an OWC SSD. The hardware change was not hard to do and resulted in incredibly good computers for my employees to use which allowed us to retire several old, slow and abandoned-by-Apple Mac Pros. There were no issues with reformatting the computers after they had SSDs put in.
Today I took delivery of a new Mac Mini server, and started to do the same thing, removing the top HDD and sliding in my SSD, since I have many of them around. Unfortunately, the OS would NOT let me format the disks separately or remove the RAID. The volumes (the original 1 TB that was inside and my 480GB SSD) were both colored red when I booted into Internet Restore mode and ran Disk Util, something I've never seen before, and all it would do was say "there was a problem with your disk, would you like to revert it to a working state?" which in this case means Disk Util forcing my drives back into a RAID whether I want them that way or not. (At one point it fused my SSD and the 1TB drive into a single logical drive that had the correct size but didn't show separate sections, and couldn't be de-RAIDED at all, even when I connected to another computer with the Mac Mini in Firewire target mode.)
I gave up and put a 240 SSD in the lower bay, resulting in a 760GB RAID of two mismatched SSD sizes, which isn't what I wanted but I guess it will do. So far it seems to be working.
My question is, why in the heck is Apple forcing me to run my computers as a RAID and/or not letting me break the system into one hard drive and one RAID, which is what I want? (Having the backup disk right inside the computer is very handy.) Is this some feature to keep us from "making our own" Fusion drives? If Apple is deciding we can't hack or do anything interesting with Mac Minis, this will the last one I purchase, and I'm sure there will be others who do the same.
Since replacing one HDD with an SDD is likely to be the most popular mode imaginable for Mac Minis, can anyone tell me if they got a similar setup to work, and if so what did you do? Can you post the steps here for others who will be in this situation?

I'm not sure how or what is different between the Standard 2012 Mac Mini and the 2012 Server...? However it looks like your Server also uses Fusion like or similar to the regular Mac Mini's.
"The version of Disk Utility that comes with Fusion Drive is unique. Earlier versions of Disk Utility can't be used with a Fusion Drive."
Have a look at > Mac mini (Late 2012) and iMac (Late 2012): About Fusion Drive
and > Special Note for Adding an SSD to a 2012 Mac mini. | Other World Computing Blog

I need help. My three boys have brand new iPad mini's and I would like to set them up. I would like to create one new apple ID and have it shared by all three. This way they can share content (apps, music). How do I do that?

Looking for an information management solution. I have three boys that have brand new ipad mini's. I would like to set them up to manage information the easiest way.
My first thought was to use my apple ID for their apps and purchases. This would give me the advantage of seeing everything downloaded and be able to monitor this closely. The disadvantage to me, was that they would see all of my contracts, my apps, and my music.
My other thought was to create one new apple ID and to share that among the three boys. This way I would not have to worry about my information being on their ipads.
This is a very confusing situation for me. My goal is seperate my stuff from my kids stuff. Appreicate input from anyone who has in-depth experience with this as it applies to apple ID, icloud ID, and any detailed explaination of how to do this would be appreiciated. Thanks.

I think I will do this. I will use my apple ID and set face time and message to work independently. That solves one problrem. My other problem and maybe my bigger problem is that if I am using my apple ID, how do I iflter all of this so that my kids don't see my contacts, get my apps, etc. ?

I just bought an iphone 5 and the pin is missing, how can i verify it is brand new and i was not sold a refurbished phone

i just bought an iphone 5 and the pin is missing, how can i verify it is brand new and i was not sold a refurbished phone

after reporting a fake problem, i was asked for my serial number, i entered it and got this message
Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us.
Doesnt this mean this a returned/refurbished iphone? it was sold as brand new

How do I know if I have new Ipad with retina display the model says MC706B/A

How do I know if I have new Ipad with retina display the model says MC706B/A

You have a 3rd generation iPad. And yes it is a Retina model.
Introduced     March 2012
Discontinued     October 2012
Model Identifier     iPad3,1
Model Number     A1416
Order Number     MC705LL/A (16 GB Black) MD328LL/A (16 GB White) MC706LL/A (32 GB Black) MD329LL/A (32 GB White) MC707LL/A (64 GB Black) MD330LL/A (64 GB White)

I have just bout a brand new ipad mini and commenced setting it up. I had to leave it for a while and switched it off. When I came back to switch it on it asked for a pass code and I haven't set one up as far as I know. Anyone know whats going on!

I have just bought a brand new Ipad mini and started setting it up. I had updated to os7.4 and after it finshed installing I had to leave it before answering all the set up questions. When I switched it back on it asked me for a pass code which as far as I'm concerned, hasn't been set up yet. Anyone know whats going on!

Hi robertbpage,
Thanks for using Apple Support Communities. If the iPad mini is asking for a password that you do not know, this article has steps you can take:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Cheers,
- Ari

How do I know it's a new iPad?

I have an iPad sitting on my desk. Nothing to compare it to. How do I know it's a new iPad and not an iPad 2?

Michalel, it is has dictation.
Christian, the model number is indeed Aq430.
Dillon, I was ready to take a crowbar to it and check the chip, but other options presented themselves. I did like the serialnumber idea.
Thanks to all.
Now, who put this thing on my dsk in the first place? - Fabe

Brand new iPad Mini Retina won't charge when its connected to my PC

I just opened up my brand new iPad Mini Retina and attempted to plug it into my PC and set it up. The iPad quickly recognizes my PC, briefly displays the charge symbol then immediately displays "not charging." I have attempted to plug the iPad into the wall, and it charges just fine. All the cables I'm using are straight out of the box which I bought right from the Apple Store so I know its not any of those. My laptop is fully charged and also plugged into the wall, so I know its not my computer. I also double checked everything by plugging my iPhone 5 into my computer (with the new iPad lightening cable) and it charges/syncs just fine. Im stumped, please help me fix my brand new iPad Mini Retina.

I know you said PC, for for others that have an iMac with USB 3 ports, they can put out extra power to charge an iPad. (http://support.apple.com/kb/HT4049?viewlocale=en_US)

Brand New IPod Mini - Can't mount iPod from IPod Updater

Just bought a brand new IPOD mini. When I try to use the IPod Updater, I get an error message "Can't mount iPod".
Windows XP Services shows IPOD services is started.
The IPOD appears in My computer as "Removalable Disk".
Also, my IPOD does not appear in iTunes.
Cheers,
Dilip Patel
Ottawa, CANADA

This is a very reasonable strategy. It has been previously used for USB problems with battery charging.
See this link: The iPod Battery Unplugged..
A synopsis of it is as follows:
"For best results, try not to use computer ports to charge your iPod. USB is especially sensitive to how many devices are on it and what the resulting bus voltage is. It may even display the charging icon but not be adding much to the battery. USB versions prior to 2.0 will not charge your iPod (and probably be too slow for its other functions). Even USB 2.0 is limited to 700 milliamps and an iPod "likes" to see one full amp for charging, plus some to spin the HD while mounted. Some (early) iPod models will not charge from USB, period. Some PCs use 4-pin Firewire cables (all Macs are 6-pin) which carry no charging voltage, so they won't work at all for recharging and can allow your iPod to run down and cause serious problems while updating firmware, restoring, or loading songs. Both USB and Firewire require the iPod to be mounted by your computer as an external drive, which means the iPod's HD is spinning, using some of the juice that the battery might like to have. And if the computer sleeps or is turned off, the battery won't charge and in some cases will actually drain through the port circuits. Bottom line: if your ports are not doing a good job of charging your battery, use the wall adapter to charge for several cycles before questioning the battery's credentials. If you have a new iPod which only comes with USB, don't panic; it can work fine. But if you do experience problems, either take everything else off the USB bus (except mouse & keyboard) and/or get an AC adapter."

HT1386 I have a brand new Ipod classic (Christmas 2012-13), a newish laptop (2012) and have downloaded the latest version of iTunes. However, despite the ipod being recognised by the laptop/iTines, telling me it is synchronising, it actually won't synch.

I have a brand new Ipod classic (Christmas 2012-13), a newish laptop (2012) and have just downloaded the latest version of iTunes. However, despite iTunes working fine on the laptop, the ipod being recognised by the laptop/iTunes, telling me it is synchronising, it actually won't synch. I have reset the ipod, tried different USB ports, restarted the laptop, and uninstalled / reinstalled iTunes, but still not working. Can anybody help ?

Well, I don't know if that's a software or hardware problem. You should take it to Apple Genius Bar or send it to service center. And one more thing, Its not synch...... Its Sync... Just saying... It would help if you send pictures of the problem. Such as the screen of iTunes saying it's syncing. It will help everyone and me...

How do I know if my brand new Mac mini (late 2012) really has Mac OS X 10.9 Maverick preinstalled?

Similar Messages

Maybe you are looking for