How do I know if my queue is stopped?
Hi all,
11.2.0.1
Our end-users is complaining that she has queue and dequeue error.
I run this command:
EXEC DBMS_AQADM.START_QUEUE(queue_name => 'MERCHANT_NOTIFY_Q');
EXEC DBMS_AQADM.START_QUEUE(queue_name => 'AQ$_MERCHANT_NOTIFY_QT_E', enqueue => false);
and the error was resolved.
How do I know when to run the command? or what status does the queue has stopped?
Thanks all,
pK
A little bit of searching resulted in
ALL_QUEUES
Note the enqueue_enabled and dequeue_enabled columns.
CURSED be the DBA who outsources ALL of his work to a forum of volunteers, and has been abusing it this way for MONTHS.
Sybrand Bakker
Senior Oracle DBA
Similar Messages
-
How do you clear the download queue?
I've reached the 3,333 track limit on my device (Android phone) and keep getting the message every time I go switch off offline mode, because I have tracks queued to download but obviously can't.How can I clear the download queue, to stop the message (and download different tracks after I undownload some others)?
I've ran into that buying a movie. You cannot cancel it. It has to finish downloading then delete it. I tried emailing apple, they told me to do it that way. I also heard they can clear your queue(apple), but that didn't happen to me. Sorry, I looked everywhere as well. I would buy a movie on my iPad to watch on atv and I had to do it that way. I just purchase from tv now and download later on MacBook or iPad if I want it.
-
How do you know what's in your sharing queue?
I've got 10+ videos in my upload to youtube queue
In the background task list, all I see is youtube upload
Details are only given when a file is processed
Let's say i want to cancel one of the video uploads, how do I know which one in the queue??
Thanks
Omarkeep notes...!!
next u'll tell me to send letters instead of email
lol
i think this is something apple need to fix
maybe they didnt account for freaks trying to upload 50 videos in succession -
How can i know the RPM of my HD?
I guys...
Simple question...
How can i know the RPM of my HD?
I have a Mac mini and i would like to know that.
Any ideas?.
Thanks so much!!!Hi!!
It doesn't show...
Vendor: NVidia
Product: MCP79 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 1.5 Gigabit
Description: AHCI Version 1.20 Supported
FUJITSU MHZ2120BH G1:
Capacity: 120.03 GB (120,034,123,776 bytes)
Model: FUJITSU MHZ2120BH G1
Revision: 00810009
Serial Number: K64PT9427599
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Lower
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
Capacity: 209.7 MB (209,715,200 bytes)
Writable: Yes
BSD Name: disk0s1
Macintosh HD:
Capacity: 119.69 GB (119,690,149,888 bytes)
Available: 21.38 GB (21,376,569,344 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
FUJITSU MHZ2120BH G1:
Capacity: 120.03 GB (120,034,123,776 bytes)
Model: FUJITSU MHZ2120BH G1
Revision: 00810009
Serial Number: K64PT9427599
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Lower
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
Capacity: 209.7 MB (209,715,200 bytes)
Writable: Yes
BSD Name: disk0s1
Macintosh HD:
Capacity: 119.69 GB (119,690,149,888 bytes)
Available: 21.38 GB (21,376,569,344 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Those are the 2 texts...
Any idea?
Thanks!! -
I recently deleted many duplicate files. In the midst of it my Itunes songs are not in Itunes. They are in two different folders. One under 'Music' in my ID. And two under a MyMusic file in Documents. How do I know which one to import?
Thanks, this is not an ideal answer but probably the most sensible one in my case.
I will try it unless someone has a better suggestion, but I'll wait a bit as it will take me a few days anyway (I had actually tried to create a new smaller playlist or download by album, but at this stage the music app is not letting me queue a list of songs for download - I think I will have to disable and re-enable iTunes match which will probably delete all the songs).
I have to say I am not very impressed with Apple here - having an online backup of all your data and beeing able to restore it to a new device easily was a strong selling point of iCloud. For music, they are Definitly not delivering at the stage. -
Every time I login I get the message "aosnotifyd wants to use your confidential information stored in "my name" in your keychain." How do I know if it is safe to allow this? Can anyone advise please?
My immediate reaction is to deny.
Have you downloaded or installed any application that may relate to the abbreviation AOS? It may not necessarily be the application's name, could be the developer or distributor.
As it's occuring at log-in, go to System Preferences > Accounts > your account > Login Items and look for a related item. If there's one there, right-click (or ctrl click) on it and select Reveal in Finder. That will show you where the originator of the item is on your system and should give you more of a clue as to what it is.
I'd remove the item from login items anyway (highlight and click the minus sign at the bottom of the window). There shouldn't be anything trying to use your keychain info to notify anyone. -
How do I know external hard drive is working?
Sorry for the simplistic nature of the questions but here goes:
Purchased a Toshiba external hard drive - plugged it in and Time Machine asked a few questions and soon it asked if I wanted to back up my internal hard drive.
After 40 plus minutes the task was completed - it stopped doing whatever it was doing - that much I'm certain.
How do I know the Toshiba is continuing to back up material? The light on the Toshiba is 'on' at times and 'off' on other times - so it's backing material up when the light is on??? Automatically, on its own?
Time Machine and/or the Toshiba do not appear to have any schedule for routine back-up (such as one would find on an anti-virus application), is there a way to schedule a backup?
Under Time Machine preferences it shows the Toshiba as the external disk. Plus I just noticed that it states the next back up will be 8:34 am today - 22 minutes from right now. What an odd time and it isn't a time I selected, at least I don't think so!
How do I access the Toshiba to see what, if anything, it has backed up?
Finally, assuming the external has backed up all the important data and should my (brand new - but that's another story) hard drive crash, how do I get the computer to ignore the damaged internal hard drive and start using the Toshiba?
As you can tell these question would be easily answered by most anyone with a modicum of computer knowledge but for me, thank goodness for Apple Discussion!
Thanks in advance.
BobSee > Setting up Time Machine backups using an external drive
From Here > http://support.apple.com/kb/HT1427
More Info > Time Machine Tutorial
Bob13018 wrote:
... how do I get the computer to ignore the damaged internal hard drive and start using the Toshiba
This is Not how TM works... It is not a Bootable Clone... Read Here...
Time Machine vs. Clones and Archives -
How do I know if my MBP will benefit from heatsink paste reapplication?
Dear Mac Users
I know the theme of hot MacBook Pro's has been done to death, but I would like to add my two pennyworth with respect to the specific question: How do I know if my MBP will benefit from reapplication of the heatsink compound? I have trawled numerous very long threads here and not found a satisfactory answer. The reapplication of the heatsink paste is a bit of a schlep and not without some risk of breaking it, so it would be good to know if the benefit is worth the risk.
One common question is: "Are my MBP temperatures unusual?". A useful mac temperature database can be found at the following link:
http://www.intelmactemp.com/list
Consulting this list should set some parameter space for many users - there does seem to be considerable variability - suggesting highly variable quality of heat sink paste application by Apple. In my particular case I have an early 2011 MBP (i7, quad core, 2.2GHz). This certainly ran very hot. I even had a burn on my thigh from it, which took a while to heal. I know, they are notebooks, not laptops, but still . . . . To put very hot into perspective, the CPU was sitting at over 60C at idle, and whole case would be hot to the touch, such that resting your hands on it was uncomfortable. And yes, the computer was idling, there were no rogue processes chewing up cycles. At full load, the CPU would run at 90C and the whole thing would get very hot. I avoided running major projects or rendering jobs on it to preserve it from heat fatigue - the warranty is now up.
My first attempt at reducing the temperatures, was to clean it. The clue was in the USB/Firewire etc ports. All were very fluffy, which suggested that there was a lot of crud in the heatsink fins. Fixing this was simple; adopt anti-static precautions; remove the back panel; blow air into the exhaust vents at the base of the screen. Numerous large fluff bunnies popped out of the fans and elsewhere. Alternatively, you can unscrew the two fans and partially lift them out (without removing the power cables to the motherboard). Major fluff on the heatsink fins can then be tweezered out, prior to blowing it through, to ensure all debris is removed. I did this subsequently on my Core 2 Duo MBP. After defluffing the idle i7 CPU temperatures dropped from 60C to 43C, but perhaps of more importance was that the whole case was much cooler and the keyboard temperature was close to ambient - much nicer to use.
So that fixed the major heat problem. However, the question remained, would I see any further improvements by stripping the thing down and reapplying the heatsink paste? What I was looking for in this forum was a rule of thumb based on temperature measurements to help me make an informed decision on whether to strip the thing down. As my machine was out of warranty, I wasn't worried about voiding that. Also, where I am there is zero support (Africa), so Genius Bar or similar was not an option. But jiggering a 14month (very expensive) laptop was not something I wanted to do for thrills. The data in many of the posts did not provide any answers. In the end I made some measurements and decided to do the fix. The step by step instructions I followed were very clear and can be found for many Macs/models at:
http://www.ifixit.com/Device/Mac
This guide made life a lot less stressful, as pulling a connector the wrong way could trash the motherboard, and those connectors are so very tiny and fragile. It is very important to take it slow and follow each step to the letter (and not skip steps inadvertently). My before and after heatsink paste fix temperature data are shown below. The idle temps are improved, while the full load temps look like a marginal improvement. However, CPU temperature is not the only story. Certainly after the fix, the whole case is generally cooler, so the heat extraction system is working better. Also, the CPU before and after temps are quite similar at full load, but that assumes the CPU is running at the same power. I do not know enough about the i7 architecture to say if the before speed was being limited by heat, while in the after case the turbo-boost was able to run out to the maximum. Unfortunately, I didn't do any CPU performance tests. So, based on temperatures alone, it looks like a marginal improvement, but it is certainly making a difference to case temperatures.
Note all temperatures were measured at an ambient temperature of 20C on a flat, hard surface using Marcel Bresink's Temperature Monitor. Fan speed was measured using the Fan Control software - set to allow firmware control at idle.
Apple original heat sink paste - big dollop of grey crud and lots of extrusion at the sides.
Idle
CPU 43C
GPU 38C
Heat Sink 2 36C
Heat Sink 3 35C
Fan Speeds 2000rpm
Full Load (all cores maxed with a Boinc Distributed Computing Project (Rosetta - the project, not the Apple technology).
CPU 89C
GPU 57C
Heat Sink 2 52C
Heat Sink 3 49C
Fan Speeds 6200rpm
Arctic Silver heat sink paste
Idle
CPU 38C
GPU 34C
Heat Sink 2 33C
Heat Sink 3 32C
Fan Speeds 2000rpm
Full Load
CPU 86C
GPU 59C
Heat Sink 2 50C
Heat Sink 3 50C
Fan Speeds 6200rpm
Back to my original question: How do I know if my MBP will benefit from reapplication of the heatsink compound? I think temperatures alone will not give a good answer - mainly because the CPU probably has variable output - due to turbo boost. One thing I did notice is that the temperature response of the CPU when it gets switched to full load, does vary according to the quality of the heatsink paste. With the original Apple paste, when I switched the CPU to full load (from idle) the temperature of the CPU went up to its maximum almost instantaneously and stayed at that level ie the graph of temperature vs time was a step function. This suggests that the CPU may be controlling the temperature by throttling itself. Otherwise, as the heatsink warmed up, the CPU should also rise in temperature - mine stayed bang on 90C and fluctuated only by a degree either side. After application of heat sink paste, the CPU has a much larger effective thermal mass and consequently heats up much more slowly. Turning the CPU up to maximum from idle resulted in the temperature climbing to a maximum over about 3-4s. After peaking at around 92C it dropped back as the fans kicked in, to around 86C.
So perhaps one way of assessing the quality of your heatsink paste is to ramp the CPU to maximum from idle and look at the shape of the temperature profile. A step function suggests a lousy job and benefit may be had from reapplication. A more gently sloping profile, followed by a dip due to the fans kicking in, may suggest you are in good shape. Obviously, this presupposes that your Mac temperatures are not insanely hot to start with (i.e. high 90sC+). In which case, if defluffing doesn't do the job, then new heatsink paste is almost certainly required.
Regards, BBI'm sorry but this is too funny to pass up.
-
Adobe Cloud has 2 different Muse programs.... how do I know which one is the newer better version?
So I am new to Muse, and my Adobe Cloud has 2 different programs from Muse... how do I know which one is the newer better version?
One Must program (Muse CC 2014.2) has a black background when working on it... it looks like other Adobe programs such as Photoshop.
The other one is light color (Muse CC) very similar to the black color Muse on functions.....
One of the difference I notice is that the light color Muse has a few widgets in the library, while the black background Muse seems to have an empty library
So... why are there 2 different Muse programs in my Adobe Cloud?Hi
The latest version of Muse is 2014.2, so you need to uninstall another version of Muse manually.
regarding the items in Library, you can add items in your library manually, as shown in this article
Adobe Muse Help | Organizing and reusing design elements using Library panel
Please let me know if you have any other query. -
I want to use Edge Animate to create native app in PhoneGap Build. How do I know if my Edge Animate compositions will scale up or down to fit each mobile phone platform's resolution? iPhone 3s, 4, 4s, 5, and 5s all have different resolutions. And do I use .png or svg?
If you use responsive scaling it will definitely scale .
For best practises regarding graphics refer
Edge Animate Help | Best practices for graphics in Adobe Edge Animate -
one of usb port in my macbook pro havent work after i ve updated latest security update for osx 10.7.5, how do i know what is cause that usb port is good or bad
On a Mac running v10.7.2, the only way to reinstall Safari is to reinstall OS X using OS X Recovery.
Safari 5.1.1 is for Snow Leopard. It will not run on a Mac with v10.7 installed. -
Help me! URGENT cannot find my printer model on hp website - how do i know which cartridge to order.
Help me! URGENT cannot find my printer model on hp website - how do i know which cartridge to order.
Depend on which country you are in btw, for the US this should be 61 black and 61 tricolor. For most of europe this will be 301 black and 301 tri color. So to be sure tell me from which country you are.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution" -
I have never backed up my iphone to my itunes because I always used the cloud. However, a few months ago, my wifi disk in my phone burned out so the Apple Store told me to back up everything to my itunes. I am going today to get the iphone 6 so I connected my phone (iphone 4S) to my itunes and I backed up and synced. However, when I look throughout the summary page and click in different areas (Photos, Movies), I don't see any of my data -- it is still asking me to Sync from iPhoto or to sync from another location. By backing up & syncing my phone, did all of my data get saved? Or do I still need to do more steps?
Sorry for the long winded question, I am just so nervous to get a new phone and plug it in to be restored and not have any of my pictures, videos or contacts, etc. Any help would be so so appreciated!Thank you again for all of your help!! I really appreciate it!
I think I am following -- I was able to upload to my iPhoto and all photos and videos are there that is a plus! I tried to create an Event in my iPhoto and put all of my photos in that event but for some reason, now my iTunes it not recognizing that Event in my iPhoto. It is not allowing me to import just that event at the moment but I may be doing something wrong. At least all of my pics and vids are in iPhoto so that is a plus and I know they are at least saved somewhere. Just for some reason, my iTunes it not locating the event that I created with only those photos.
Thank you for letting me know about my contacts! How do I know if I have the contacts app?
Also, I had no clue that my iCloud could be backed up via cellular data! However, is this a new feature with the most updated iOS?? Unforutnatly I am like 2 iOS updates behind because I don't have enough storage on my phone. I still get the notification that my phone needs to be plugged in and connected to wifi in order to back up to the cloud :-(
How can I sync using USB? Right now when i click on the info tab for my iPhone in my iTunes this is the answer that I get -- I am a little unclear as to what it means.
Sync Contacts:
Your contacts are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
Sync Calendars:
Your calendars are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone -
I am trying to use the locate my macbook that was stolen. How do I know if it is set up on the service. It shows on the list but just says it is offline and doesn't say when or where it last was. I am trying to either locate it or erase it. HELP
Since you can see it in your device list it must have Find My Mac activated, but you're going to have to wait for them to take it online in order to either locate, lock or wipe it. Until it goes online you can't do anything. http://www.apple.com/support/icloud/find-my-device/
iCloud: Locate your device -
McAfee program searches for programs that are susceptible to malware and automatically searched for updates and installs them. For some Reason, when it comes to Adobe products it requires myself to have to perform a manual update.
When I followed the link McAfee provides to the Adobe website and follow the steps to install the update....at one point it give you and option of an update that as the word "Full" in the middle of the Update Choice, and the 2nd option is exactly the same except instead of the word "Full", it has the word "Slim".
Nowhere (FAQs, etc) can I find the difference between the two, so how do I know which I need?
I have a Dell Laptop with Windows 8.1 operating system.
8GB Ram and I think its one of those Quad Drive things
1 TB Memory
I use Firefox as my internet operating system.
I started with Internet Explorer, but a problem existed that had something to do with that program not being loaded properly initially,
I tried to Get Microsoft Help but they wanted $149 to fix it, So I abandoned use of Internet Explorer and loaded Fire Fox.
I will note, I don't know if its germane or note, Since switching to Fire Fox, my system stalls quite frequently and I get a popup that says something about a Flash Program (maybe shockwave flash) and it states it is not responding. It gives me the option to continue or cancel and a check box to not ask me again. Though I select that check box I do get asked often.
When this Popup occurs, I can't use any of the internet windows I have open or any of the internet window Tabs I have open. It also seems to affect the one game I play (Spider) and it stalls that game also. I sense it has something to do with anything that has pictures on it possibly. After several minutes 3 to 5 plus it seems to recover
I'm sorry I am not real computer literate
Thank you for any help you can provide
Keith
PS All I am trying to do is get hold of Adobe to ask about their program, why I have to do all this registering and go into a Forum or Community (whatever those are) is confusing to me.The Full version includes all xtras and the Slim version just the bare essentials. I would recommend using the full version as your experience of using the plugin will be more seamless (no pausing while required xtras are downloaded on demand)
Maybe you are looking for
-
New itunes wont download! *pics included* HURRY HELP!
so i saw that there was a new itunes available, i download it only to see more error messages! i downloaded the standalone quicktime fine but itunes didnt work, plz help me! i got pics to show you, here they are: http://img.photobucket.com/albums/v34
-
Hi all, I am using the document BAPIs for creating a document (BAPI_DOCUMENT_CREATE) and checking in it (BAPI_DOCUMENT_CHECKIN2), and although I do not get any error message, the document seems not to be checked in... does someone know if this works,
-
How to remove Leading zeros from MATNR "at Database Level"
Hi, When we create a material in MM01 , we can either create material as Internal Material No. or External Material No. (By Explicitly entering a material No.) Our requirement is that: When we create an Internal Material , there should NOT be any Lea
-
Need to call storeprodure from entity object model in visual webpart
Getting error Could not load file or assembly 'EntityFramework, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' or one of its dependencies. The system cannot find the file specified. How to resolve it. Thanks, Siva.
-
Want to install new version of Firefox but "permissions denied".
Firefox has prompted me to update but when I download the new release and try to intstall a pop-up tells me that permissions are denied. Can anyone tell me what this means and how to overcome this? Thanks