How do I know if the Maverick software update has been installed on my mac?

How do I know if the Maverick software update has been installed on my mac?

It will not download if you already have it.
Just to be 100% clear …
Look in /Applications for "Install OS X Mavericks"
Use the Finders Go menu > Applications. To open it.
You may have an Applications folder in your Home directory too, it shouldn't be in there but it is possible.
Also try Spotlight to see if it can find that filename.
Can you also tell us what system you have?
Apple menu > About this Mac > more info button… What is the Model (under the Overview tab).
10.9 doesn't install on all systems, so it could explain why you can't get it, however it usually displays a dialog stating that fact.

Similar Messages

  • I downloaded the os 6 by wifi and when the phone restarted it told me to plug into itunes. I did that and the iphone software update has been stuck on '70 hours remaining' for the last 3 hours. Help!

    I downloaded the os 6 by wifi and when the phone restarted it told me to plug into itunes. I did that and the iphone software update has been stuck on '70 hours remaining' for the last 3 hours. Help!

    it says " itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes" so i restore it and after it gets finished it says " the iphone :iphone" could not be restored. the device cannot be found" but ive used this itunes since i got this phone.

  • How can I determine if a Critical Patch Update has been installed?

    I know I can use opatch -lsinventory to confirm that a the patch has been installed in an Oracle home, but how can I check to see if the CPU script (catcpu.sql) has been run in a database?
    I'd like to know for two reasons:
    1. I am concerned because I have many databases to patch under a single Oracle home and I'd like to check them all to make sure I didn't miss any.
    2. I've heard that I'll have to run catcpu.sql in any new database I create under this Oracle home. I know I'll eventually forget to do this, so I'd like some way to check if the script has been run.
    Thanks in advance

    Paul,
    Starting from CPUJan2006, these actions will be recorded in registry$history table.
    You can find this out by
    select ACTION , VERSION, COMMENTS from registry$history;
    SQL> select * from registry$history;
    ACTION VERSION COMMENTS
    CPU 10.2.0.1.0 CPUJan2006
    Before CPUJan2006, you may to check it through a crude way of finding CPUXxxYYYY dir and cheking APPLY... and ROLLBACK... log files.
    Akshay.

  • How do you know if the Maverick download is happening?

    I am now trying to download Maverick .. & have been hearing a whirring sound. But it starts then stops?
    - BUT I can't tell if it's done. I've kept the "page" on the screen, and the "download" button shows grey & it shows "Downloading"
    - BUT I don't see any circles, to show anything is happening.
    - NOR can I see anything on download in Finder. I've been checking the apple icon to see & it still shows Lion, 10.7.5 that I got in 2012. I have 4GB.
    So, How do you know if the Maverick download is happening - & when it's done?
    Last, do you have to restart the computer? I haven't been able to find a "how to" about this download.
    Thanks

    With App Store open, purchases or updates pane (can't recall which), CMD+R to reload the page, and you should see a progress bar. Should look like this:

  • Mavericks Software update "iTunes" stuck installing

    I can't select the app icon as it is under the Mavericks software update tab and not installing as it's own app. It is stuck on "installing-calculating..." not sure what I can do to get it moving. iTunes won't open as it says its being updated but nothing is actually happening.

    Navigate to ~/Library/Preferences/com.apple.SoftwareUpdate.plist and drag the file to your desktop. Then restart in Safe Mode to clear some caches. While you are in Safe Mode then try to Software Update and install the update. Then restart normally.
    If you are not sure how to get to ~/Library/Preferences/com.apple.SoftwareUpdate.plist simply open a Finder window click the Go Menu and copy ~/Library/Preferences/com.apple.SoftwareUpdate.plist into Go to Folder....

  • How can I know if malicious spyware or malware has been downloaded to my iphone 4?

    How can I know if malicious spyware or malware has been downloaded to my iPhone 4? And if so, how do I remove it?

    If your device has not been jailbroken, there can't be viruses or malware on the phone.

  • When i run Time Machine to back up my computer onto an external hard drive, i have no way of knowing when the back up process has been completed. I don't know when it is safe to disconnect the external hard drive - which is store in a separate location.

    When i run Time Machine to back up my computer on to an external hard drive, i have no way of knowing when the back up process has been completed.  This is necessary to know because i don't leave my external hard drive connected to the computer.  I routinely disconnect it after backing up the hard drive, and then i store the external hard drive in a different location from the computer.  So, knowing when the back up process has been completed would be a very helpful thing to have the computer specify. 

    Just enable Time Machine's menu extra (System Preferences -> Time Machine -> Show Time Machine in menu bar.
    This will add a little Time Machine icon to your menubar. When Time Machine is actively backing up your data, the icon will spin as a visual indicator. You can also click the menu icon to see the backup status, including how much data is left to back up.

  • Installing Software Update has been running for over an hour now, anyone else having the same issue?

    Installing Software Update has been running for over an hour, anyone else have the same issue?

    Hopefully it's been resolved by now - I have no idea how large each one of those files are. The progress bar tells you; FWIW, I only download one at a time - makes it easier and faster and you can choose to do the next one when you have time.

  • How do I know if security hotfix APSB13-13 has been applied?  My version is 9.0.1.274733

    How do I know if security hotfix APSB13-13 has been applied?  My version is 9.0.1.274733

    With APBS13-13 applied CFAdmin System Information would report:
    Server Details 
    Server Product  ColdFusion 
    Version  9,0,1,274733   
    Update Level  /C:/ColdFusion9/lib/updates/hf901-00010.jar   
    HTH, Carl.

  • How do I add Chinese local after Solaris OS has been installed

    How do I add Chinese local after Solaris OS has been installed. right now on my
    /usr/lib/localedef/src I only have iso_8859_1
    Thank you

    Welcome to the Apple Support Communities
    1. To boot into Mac OS X, press X key while your computer is starting.
    2. Install Boot Camp drivers

  • HT4623 What if your software updates has been deleted

    What if my software updates has been deleted

    The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 on your iPad then you can only update via your computer's iTunes, as described half-way down the page that you posted from.
    To update via a computer, connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Devices > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand sidebar of iTunes and selecting 'Backup' (on iTunes 11 you can enable the left-hand sidebar via option-command-S on a Mac, control-S on a PC)
    Then start the update by selecting the iPad on the left-hand sidebar, and on the Summary tab on the right-hand side clicking the Check For Updates button
    Updating to iOS 5+ : http://support.apple.com/kb/HT4972
    Your iPad will be updated to the highest iOS version that it supports, which for a first gen iPad is 5.1.1, and for other iPad is iOS 6.1.3

  • Error. This extension cannot be installed, since it conflicts with an existing one. To install this extension, please remove the extension 'GuideGuide' which has been installed in", then install again.

    When I try to install GuideGuide extension this error message popups " This extension cannot be installed, since it conflicts with an existing one. To install this extension, please remove the extension 'GuideGuide' which has been installed in", then install again."
    Photoshop CC

    Hi,
    Have you ever uninstalled Photoshop CC and installed Photoshop CC 2014, or uninstalled Photoshop CC 2014 then installed Photoshop CC?
    If that, please re-install you uninstalled Photoshop, and remove GuideGuide from Extension Manager before uninstall.
    Another option is remove extension manager database file, then launch Extension Manager to install it.
    C:\ProgramData\Adobe\Extension Manager CC\Configuration\DB\ExMan.db (Windows)
    /Library/Application Support/Adobe/Extension Manager CC/Configuration/DB/ExMan.db (MAC)
    But please notice that all your previously installed extensions will not be shown in Extension Manager after you removed database file.

  • How can I know if the Oracle software is  64-bit or 32-bit

    Hi all,
    How can I know if the installed Oracle software is 64-bit or 32-bit.Actually I'm using an oracle database 10.0.2 on a Solaris 10.
    Cheers.

    Dear user11191992,
    Please check below link;
    http://download.oracle.com/docs/cd/E11882_01/server.112/e10820/dynviews_3120.htm#REFRN30296
    Here is for the release number;
    http://download.oracle.com/docs/cd/E11882_01/server.112/e10595/dba004.htm#ADMIN11039
    Another way is to enter the database with;
    # sqlplus / as sysdbaHope That Helps.
    Ogan

  • I need to delete programs that have been duplicated after the software update has been done.  The computer won't delete them.  Anyone else having this problem and if so, how do I delete the old program after it's been updated.

    After upgrading software, it appears the old software isn't deleted.  My computer hard drive is almost full so I need to delete a ton off of my computer.  When checking the software that can be deleted I noticed I can the old software hasn't been deleted.  How can a person do this?  Any suggestions on how to quickly dump some programs.

    Sig is right — reclaiming space on your hard drive should be a matter of looking for the largest files you can delete, not starting with applications. I have 200+ applications on my hard drive, and altogether they occupy less than 14GB of space. Just a handful of them — Acrobat Pro, iPhoto, Aperture, Illustrator, Photoshop, InDesign and Adobe Media encoder — are larger than 500MB apiece, and if I disposed of all of those, I'd only get 5.6GB back. My Utilties folder contains 78 apps, and it only amounts to 1.1 GB.
    If you have any feature-length movies on your hard drive, those should be the first things you trash or move to an external drive.

  • How to determine which of the Oracle security products have been installed

    Hello!
    I would like to determine whether or not the Oracle security products have been installed for an Oracle database.
    The Oracle security products are:
    * Oracle Database Vault
    * Oracle Audit Vault
    * Oracle Configuration Management
    * Oracle Total Recall
    * Oracle Advanced Security
    * Oracle Data Masking
    * Oracle Label Security
    * Oracle Secure Backup
    * Oracle Database Firewall
    So what I thought is to look at the "DBA_REGISTRY" table which displays information about the components loaded into the database.
    But on the other hand there also is the "V$OPTION" view which lists database options and features.
    Does anybody know, how I could correctly determine whether or not each of the product is installed?
    I guess for "Oracle Database Vault" I should query V$OPTION, but what should I do with the other ones? And in case DBA_REGISTRY would be the right table, how would the comp_ids look like for the products?
    SELECT 'Oracle Database Vault' , nvl( (SELECT VALUE FROM V$OPTION WHERE PARAMETER = 'Oracle Database Vault'),'FALSE') FROM sys.dual
    OR
    SELECT 'Oracle Database Vault' , nvl2( (SELECT 'valueFound' FROM DBA_REGISTRY WHERE comp_id = '??????' AND status NOT IN ('INVALID', 'REMOVING' , 'REMOVED')),'TRUE','FALSE') FROM sys.dual
    Thanks in advance
    Kai

    Hi kai;
    There are some script avaliable on net, first please check them and run it on test server first!
    http://www.google.com.tr/#hl=tr&biw=1259&bih=793&q=installed%2Bproducts%2Boracle&aq=f&aqi=&aql=&oq=&gs_rfai=&fp=71a534c4a5161590
    Secondly you can check oraInventory and also oratab file or you can run runInstaller and can check Installed product tab on installation screen
    Regard
    Helios

Maybe you are looking for