How do I know if version 8.01 was successfully installed?

I am having the CRASH problem while opening a project. I downloaded and supposedly installed the update 8.01 but when the program opens it sitll says 8.0.
And the CRASH still happens.
Windows 7-64 8G RAM
Thanks Much

Nope, the ddl files are all 2009 and I am running 64 bit.
I still have the 8.01 exe. and when I run it it says the program is already updated.
Lovely.
I think it is time for a reinstall.
Thank you for your quick response.

Similar Messages

HT201328 how do I know that my unlock restore was successful and that indeed my phone is unlocked?

how do I confirm that my I-phone 4s is "unlocked" once I have done a backup and restore?

Towards the end of the Restore process you will receive a message syaing your Device was Successfully Unlocked.

How do you know what version Mac OSX is on ANOTHER drive?

How do you know what version Mac OSX is on ANOTHER drive without starting that drive
and seeing the system profiler? In fact, because the drive wont start up, Now I am wondering if it is pre-intel. ? CMD-I doesn't do it. Thanks

Why mess with this? Well, I got the HDDs and the enclosure from my previous PPC, so I'd like to make use of it all without $pending again.
I don't see any problems with using the card and drives on your new Mac. Hardware is too pricey to just leave behind if you can't help it. With the new drivers I suspect you'll be able to use your drives, I just don't think you'll be able to boot from them if the interface card requires drivers. They should still be very fast storage devices, and probably reliable due to the ongoing support the vendor has provided.
I went through the same type of issue when I bought my Dual G4 1.42 Tower (upgraded from a Quadra 840AV ). Several of my devices were SCSI (I was into SCSI Wide/Fast drive arrays at the time for video capture), and I was able to use an Adaptec card for scanning for several years with Jaguar and Panther. I'd spent quite a bit of cash to ensure high quality and performance and didn't want to loose all of the investment. Eventually the SATA hard drives and other USB and Firewire replacements became so cheap and performance improved enough that loosing SCSI with Tiger was not a big deal. I do think I should get about 5 years of hardware compatibility with most products and I keep older Mac's around for dedicated services as long as they aren't a costly maintenance issue.

How do i know what version of the Firmware Upgrade 1.01

Op
ps.
What i was trying to say is how do i know what version of the firmware does my player have installed on it,
I have a 28mb MuVo V200 and i was thinking of downloading the Firmware Upgrade .0.03 but i do not know if my player already has iMessage Edited by The_D_AUS on 05-0-2005 07:45 PM

Just access the player Menu and then scroll to the option 'Setting'->'Information'.
Jason

How do you know the version of a JAR file ?

how do you know the version of a JAR file ?
is it what is written on MANIFEST.MF ?
for example i have a JAR file
whose MANIFEST.MF has this
Manifest-Version: 1.0
Created-By: Ant 1.4.1so, whats the version of this JAR ? 1.0 ?

anyway, that was JSTL..jar.
Now, come to another JAR file....
whose MANIFEST.MF has......
Manifest-Version: 1.0
Created-By: Apache Ant 1.5.1
Extension-Name: Struts Framework
Specification-Title: Struts Framework
Specification-Vendor: Apache Software Foundation
Specification-Version: 1.1
Implementation-Title: Struts Framework
Implementation-Vendor: Apache Software Foundation
Implementation-Vendor-Id: org.apache
Implementation-Version: 1.1
Class-Path: commons-beanutils.jar commons-collections.jar commons-dig
ester.jar commons-logging.jar commons-validator.jar jakarta-oro.jar s
truts-legacy.jarso, How do you believe whats the version now ? do u go with the comment "Manifest-Version: 1.0" or "Specification-Version: 1.1" ?
definitely, you would go with the "Specification-Version: 1.1" and declare this JAR as STRUTS 1.1
hmmm, so, if nothing is mentioned like above should we follow the MANIFEST version as the JSTL version ? in my earlier example i did not find any comment on ""Specification-Version" ......so , if anybody gives me that JAR , how do i decide whether its 1.0 specification or 1.1 specifucation compliant ?
can you tell whats the JSTL version of my earler example JAR file ?

HT4759 How do I know what version I'm running on my iPad?

How do I know what version is running on my iPad?

Rose May wrote:
Can it be upgraded?
You have not supplied any Information...
But See Here... How to update your iPhone, iPad, or iPod touch

How do you know what version of OS X you have on your Mac Mini?

How do you know what version of OS X you have on your Mac Mini?

Apple Menu (upper left on meu bar) > About This Mac
"Verion: " 10.8.x is Mountain Lion, 10.7.x is Lion, 10.9.x is Mavericks, 10.6 x is Snow Leopard.

How do I know what version of iTunes I have?

Trying to download music from windows laptop...says my iPad iTunes needs to be version 11.1 or higher...how do I download latest version and how do I know what version I have?

To find out what version you have, click on Help > About iTunes.
To get the latest version, go to http://www.apple.com/itunes/download/

How can i know which version of Smartview is installed on my system ?

Hi All,
How can i know which version of Smartview is installed on my system ?

Do you know what version of Essbase you are running? that could help. You can find that in EAS. Right click on the server name and select edit ptoperties, then look on the environment tab. As a final measure, find the smartview.exe on yout machine right click and select properties. in one of the tabs there might be a version number

How do i know the version of AD in my instance ?

Hello All,
How do i know the version of AD in my instance ?
Reg
Chirag Patel

- Use Patchset comparison tool - patchsets.sh (Note: 139684.1 - Oracle Applications Current Patchset Comparison Utility - patchsets.sh)
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=139684.1
- From OAM
- Use Applications Diagnostic Tests
- Use $AD_TOP/sql/adutconf.sql
- By running the following SQL:
SQL> select patch_level
from fnd_product_installations
where patch_level like '%AD%';

How can i know the version of autoconfig ?

hi
I am on 12.1.1
to determine my autopatch version i used Note 390666.1
i ran
SET head off Lines 120 pages 100
col n_patch format A10
col bug_number format A10
col patch_name format A10
spool LACF_ptch_level.txt
select ' LACF ' FROM dual;
select bug_number, decode(bug_number,
'4494373' ,'R12.TXK.A'
,'5872965' ,'R12.OAM.A'
,'5909746' ,'R12.TXK.A.1'
,'5917601' ,'R12.TXK.A.2'
,'6077487' ,'R12.TXK.A.DELTA.3'
,'6145693' ,'R12.Rapidclone Cons Jan2008'
,'6776948' ,'R12.Rapidclone CONSOLIDATED'
) n_patch, last_update_date
FROM ad_bugs
WHERE bug_number IN ( '4494373', '5872965', '5909746', '5917601', '6077487', '6145693', '6776948' );
the output was
4494373 R12.TXK.A 04-JAN-07
4494373 R12.TXK.A 22-JAN-08
5872965 R12.OAM.A 22-OCT-07
5872965 R12.OAM.A 22-OCT-07
5909746 R12.TXK.A. 22-OCT-07
1
5909746 R12.TXK.A. 21-JAN-08
1
5917601 R12.TXK.A. 22-OCT-07
2
5917601 R12.TXK.A. 21-JAN-08
2
6077487 R12.TXK.A. 22-OCT-07
DELTA.3
6077487 R12.TXK.A. 21-JAN-08
DELTA.3
6145693 R12.Rapidc 06-NOV-08
lone Cons
Jan2008
how can i know the version of autoconfig from that?
Thanks

Hi,
4494373 R12.TXK.A 04-JAN-07
4494373 R12.TXK.A 22-JAN-08
5872965 R12.OAM.A 22-OCT-07
5872965 R12.OAM.A 22-OCT-07
5909746 R12.TXK.A. 22-OCT-07
5909746 R12.TXK.A. 21-JAN-08
5917601 R12.TXK.A. 22-OCT-07
5917601 R12.TXK.A. 21-JAN-08
6077487 R12.TXK.A. 22-OCT-07
6077487 R12.TXK.A. 21-JAN-08
6145693 R12.Rapidc 06-NOV-08
how can i know the version of autoconfig from that?The above indicates that the latest patches applied are 6077487 and 6145693.
To find the latest AutoConfig and Rapid Clone patches on R12, please refer to:
Note: 387859.1 - Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12
Note: 406982.1 - Cloning Oracle Applications Release 12 with Rapid Clone
Thanks,
Hussein

How can I know the version of Application Server Java Virtual Machine

How can I know the version of Application Server Java Virtual Machine?
Thanks a lot.

Thats easy. Your jdk/jre are located in the App Server home directory. Just run the java command under the jdk directory with the "-version" switch and it will provide you with detailed information about your VM.
For example if you're doing it at command prompt it will be something like
java -versionI hope this will be useful to you.
Regards,
Wasif

How do I know which version of Premier Elements 13 to choose for installation ... 64 Bit Installer (64.exe) OR 64 Bit Installer Package (64.7z)? Thank you

How do I know which version of Premier Elements 13 to choose for installation ... 64 Bit Installer (64.exe) OR 64 Bit Installer Package (64.7z)? Thank you

You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

How can i know current version of webdynpro

Hai,
How can i know , which version of webdynpro now iam using.
what are the versions of webdynpros released up to now.
Regards,
Naga Raju

If you login to the J2EE Engine Start Page of your server and you go to system information (http://<host>:<port>/sap/monitoring/SystemInfo) you can view all components and their versions (http://<host>:<port>/sap/monitoring/ComponentInfo).
Regards,
Christophe

How do I know which version to download?

How do I know which version to download?

If you are trying to Upgrade to Mountain Lion you must Purchase it.
Be sure to make a Backup of your Current System Before Upgrading...
Upgrade to Mountain Lion
Check here for compatibility of 3rd party Software you may be using...
http://roaringapps.com/apps:table
You should also consider more RAM... Get the Maximum you can for your Mac...
It is important to get the Correct and Matching RAM
See Here > OWC RAM > http://www.macsales.com

How do I know if version 8.01 was successfully installed?

Similar Messages

Maybe you are looking for