How do I know the daq card is collecting data i.e. has been triggered trigger

I want to alert the user that the daq card is collecting data after he pushes the trigger switch.  I wish to update a message text box when it has been triggered.  Thanks,  PCI-6221 37 pin

You could use something like this, to ensure that at some specific point in your code a string indicator on the front panel is updated.  After placing the string indicator, right click on it go to Create>>Proprety Node>>Text>>Text.  The string indicator will update to the input of this property node when this sequence structure is reached.  Does that help?
Regards,
Shane C
Regards,
Shane C
Applications Engineer
National Instruments

Similar Messages

  • How can I allow the application to line through a field that has been locked after being digitally signed?  We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once

    How can I allow the application to line through a field that has been locked after being digitally signed?
    We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once the approved information is entered we line through the proposed field so the data entry clerk won't pick up the wrong information.  However we are receiving an error when attempting to enter data  in the field which we have this edit.  Error property: line through cannot be set because doing so would violate the document permission setting.  any idea how we can get around this issue?

    You can control which fields are locked down after signing by setting up a collection. Then those that are not locked can be changed after signing. If this is not possible, then the line outs must occur prior to signing.

  • How do you change the lettering style of a adobe document that has been sent to you?

    How do you change the lettering style of a adobe document that has been sent to you?

    You can do this with Acrobat, but, as Claudio says, it's not possible in Adobe Reader.
    If you do have Adobe Acrobat, you can learn how to modify text styles here.

  • How do I fix the album art on my iPod? It has been scrabbled due to the iOS update.

    My iPod touch 5th generation has had two problems come up since the iOS update; I regret updating because I was happy with how it was before. The album art has been scrabbled on my iPod; it has placed album art that goes with other songs to the wrong song or has album art I've never seen before.  My iPod also has a problem with music now. I've noticed that I am unable to play music that I once could. Some have an iCloud or stop symbol next to it and I can not listen to them. I notice that while it plays my music on shuffle, while looking at the screen and song, it will skip through about 2-5 or more songs as if it's not allowed to play it. I am very irratated with these problems. Everything was all dandy before these updates. Any feedback would be very helpful and I thank you.

    Artwork doesn't sync with music in ipod...: Apple Support Communities
    next try
    - Unsync all music and resync
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             

  • How to find out the PO line items for which no GRN has been done

    Dear Friends,
    I need a report which will show all the fully open PO items for which no GRN has been done.
    In ME2N when I give the selection parameter "open goods receipt" then it shows all the line items with partially & fully open. But my requirement is to get a report of only fully open items.
    Regards
    Rutabhadra Panda

    Hi Friends,
    Thanks a lot for your reply.
    But this is a report which projects the expected GRNs & does not depend whether partial or full.
    Is there any other way out?
    Can  I download from the table directly.
    Regards
    Rutabhadra Panda

  • HT3702 How do I remove the credit card from my app account it has money on it and I can not download free applications?

    I need help to take my credit card off my phone it is depleted and every time I go to applications and try to download free applications I am denied so I would like to remove it please help thanks

    Try contacting support for suggestions my friend.
    https://expresslane.apple.com

  • How do I find the total time (number of hours) my computer has been used?

    I am not looking for battery cycles or idle time but time in actual use. I'm curious for a number of reasons. Anyone have any idea how to figure this out?
    Thanks!

    I do not know of any other place that records operating times of the MBP.  Look for third party applications.
    Ciao.

  • When I try to activate Java plug in it keeps failing when I try to activate it. How can I get the Java plugin to activate on FireFox.Java has been updated.

    I tried activating the plugin at osgov.com/webcam.html to see the web cam. I keep getting an error message that the plug in failed when i try to activate it when I am on firefox.

    Hello T.B., if you already [https://support.mozilla.org/en-US/kb/how-to-use-java-if-its-been-blocked#w_activate-java-once Activate Java once], try to reload the page and check it again. If does't work try to [https://support.mozilla.org/en-US/kb/how-to-use-java-if-its-been-blocked#w_always-activate-java-for-a-site Always activate Java for a site]
    Java 7.11 is vulnerable, so use it, it if absolutely necessary.
    thank you

  • How can I allow the application to line through a field that has been locked after being digitally signed?

    We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once the approved information is entered we line through the proposed field so the data entry clerk won't pick up the wrong information.  However we are receiving an error when attempting to enter data  in the field which we have this edit.  Error property: line through cannot be set because doing so would violate the document permission setting.  any idea how we can get around this issue?

    You can control which fields are locked down after signing by setting up a collection. Then those that are not locked can be changed after signing. If this is not possible, then the line outs must occur prior to signing.

  • How can I allow the apHow can I allow the application to line through a field that has been locked after being digitally signed? plication to line through a field that has been locked after being digitally signed?

    How can I allow the application to line through a field that has been locked after being digitally signed?
    We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once the approved information is entered we line through the proposed field so the data entry clerk won't pick up the wrong information.  However we are receiving an error when attempting to enter data  in the field which we have this edit.  Error property: line through cannot be set because doing so would violate the document permission setting.  any idea how we can get around this issue?

    HI,
    Kindly post this query in Acrobat forum:Acrobat
    Regards,
    Florence

  • How to run VI without the DAQ card connected to the labtop

    This may be a silly question but I want to have the answer and couldn't find the answer for spending time in searching in the web.
    I want to run the VI that controls the intruments in my labtop. The VI was run in a destop that has a DAQ card in the PC (a PCI card).  I know it is possible to run it without errors (without a DAQ card) in my labtop . Anyone knows how to do it? I used labview 7.1. Thanks,
    Jun

    If you are using DAQmx and if the DAQ card is supported, you can add a simulated device in MAX.

  • How SCXI modules are multiplexed into one Channel of the DAQ card?

    Hi all,
    I am Sirisha from Hyderabad.
    I am a new to NI hardware.
    take the below mentioned senario.
    Suppose i am using SCXI-1000 chassis with SCXI-1520 and 3 SCXI-1102 modules and PCI-6070E DAQ card.
    now i know that if i connect the DAQ card to the SCXI chassis through sh-6868 cable and 1349 adapter, all channels of SCXI modules are multiplxed into the 0th channel of DAQ card.
    Here i want the detailed explanation of theory of multiplexion on how all the scxi channels go to 0th channel of DAQ card
    Thanks in advance
    regards
    Preetam

    Sirisha,
    Thank you for contacting National Instruments.
    Here is a KnowledgeBase article entitled "How Are SCXI Channels Multiplexed While Having Other Inputs On The DAQ Card?"
    There is a little more specific information about multiplexed mode here.
    Michael P
    National Instruments

  • How can i know the exact model of my wireless network card? macbook pro 13"

    how can i know the exact model of my wireless network card? macbook pro 13"

    I think the best you can do is use the System Information application (Utilities Folder), looking in the wireless section.
    charlie

  • How to program the daq card to route signals?

    Hi,
    I would like to program the daq card to route signals, for example from DIO0 to
    DIO1. All this should happen without Labview, directly on the board. Is this possible?
    What I want to do, is to get a lot of signals as inputs and output those
    signals as they are. Sometimes I need to take one signal through Labview
    and make some modifications to it. If I route all the signals through Windows
    and Labview will propably cause latency, so I would like to do this at the lowest
    level as possible.
    Currently I'm using PCI-DAQ 6025E, but this card might not be sufficient for our
    needs, so if this is possible with some other card, please share your information.
    All information on this matter is highly appreciated.

    Oops!. I just noticed that I accidentally posted this question to the wrong forum.
    I posted a new one to "multifunction DAQ", so if you have something to say about
    this matter, then go here
    http://forums.ni.com/ni/board/message?board.id=250&message.id=31100
    Thanks.

  • How can i control the DAQ directly from VB

    Actually, it is my first trial to use Visual Basic to get signal from DAQ.
    And i don't how to interface them. I have read an article to use DataSocket.
    However, it demostrated the OPC demo in OPC sever only, and so i didn't know
    how to get the signal directly from DAQ card to monitor the real-time
    signal.
    Also, i have tried to build a .dll from my VI file which is used to monitor
    the DAQ signal. However, the .dll file didn't have any return value or
    argument, did it mean i can use this method?
    And how can i interface the DAQ using VB?and my ADC model is AT-MIO-16E-2!
    Thank you very much

    Hi Sen,
    Are you using Measurement Studio ? If so then you can use the DAQ activeX controls.
    If not and you are using VB directly, then NI-Daq installs with examples for visual basic ( if you chose the option while installing- if not do a custom install and choose VB support). If so then you should find them under Program Files ->National Isntruments->NI-DAQ->Examples->VisualBasic. These may help you.
    Essentially NI-DAQ ships with a .bas file that contains the "declares" for the NI-DAQ dll functions. These files should be in
    Program Files ->National Isntruments->NI-DAQ->Includes (look for the .bas files) You can add these to your project to get access to the DAQ functions..
    On the second question, do you mean you are using labVIEW to create your dll ? If this
    is the case, then when you create your dll (in labVIEW's applciation builder) you have to set the parameters for the function (VI) and also the VI's return values. This will ensure that you can make use of your VI ..If you don't set a return value you really can't use it...Once you set the return value ,and create a dll, then you can use it like any other dll in Visual basic.
    Hope this helps...
    This link may help you
    http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/5052ad60f1accc3d862568a100717fd1?OpenDocument
    Nandan Dharwadker
    Staff Software Engineer
    Measurement Studio Hardware Team

Maybe you are looking for