How do I know what clip quality my timeline uses (proxy/422/orig)?

I have noticed that you cannot make your project codec ProRes proxy. Only ProRes 422 or better.
So if I have a clip that is transcoded to only ProRes proxy it will use that on my ProRes422 timeline to speed up editing I guess. But when I export my project, will FCP use the original media as basis for the export or will it use the ProRes422 as basis for the export?
Also, if I have a clip that is transcoded to both ProRes 422 and proxy and I drag that into the timeline. Which version will FCP use for the editing?
If I have a clip in some long gop format that is not transcoded and I drag that to the timeline, will FCP transcode on the fly or will I be editing the original media?
If you have a clip transcoded to both formats (ProRes 422 / proxy), is there some way to delete one or both transcoded versions from within FCP in order to save disk space?
Can anyone shed some light? The manual is not very helpful with regards all this...

Select clips in the event browser, control-click and choose Transcode. You get the option to create proxy files.
Preferences Playback lets you set what plays back original or proxy.
If I have a clip in some long gop format that is not transcoded and I drag that to the timeline, will FCP transcode on the fly or will I be editing the original media?
You don't edit any actual media. The only question is what is used for playback. If you don't transcode the original is used for playback; this may require a lot of processor power.
If you have a clip transcoded to both formats (ProRes 422 / proxy), is there some way to delete one or both transcoded versions from within FCP in order to save disk space?
Go into the Events folder and delete what you don't need. I wouldn't do this. You're better off doing it right from the start and sticking to it.
When you import you can import either original or optimized, not both. If you optimize later the application will use the optimized media or the proxy media, which you transcoded to and specify in preferences. Do not specify proxy media if there isn't any. Everything in the project will go offline.

Similar Messages

  • HT1918 how do you know what computers are authorized to use home share before i delete a computer

    how do you know what computers are authorzed to use an I tune account?

    Welcome to the Apple Community.
    There is no way to view a list of authorised computers. You can only tell a computer is authorised from that computer itself, from the store menu in iTunes.

  • How do i know what app store account was used to install an app on my macbook pro?

    Hi All,
    For about a year i have been bugged by the app store that i a couple of apps that are not up to date. I have tried to find the account that the app was installed with. I have found three accounts on my name, i logged in with all of them but no luck. How can you figure out under what name an app was installed?
    Thanks for any suggestions,
    Aad Nales
    PS: I the maps fiasco was enough to get some people fired, then this should even lead to more job changes :-)

    Please try each of the following steps you haven't already taken, until the issue is resolved. After each step, relaunch the App Store and try again.
    1. Follow the instructions in the Apple Support article linked below:
    Mac App Store: Cannot update App Store purchases or updates do not seem available
    2. If any App Store purchases were made under a different Apple ID, or if the bundled iLife applications were accepted under a different ID, sign in to the App Store with that ID to update.
    3. Alternatively, delete the probem applications and re-download them with the ID you're using now. If you haven't already purchased them with that ID, you'll have to do that first, because purchases can't be transferred from one account to another.
    4. Select the Purchased tab in the App Store window. If you see an item in the list marked "You have 3 apps to accept," click Accept.
    5. Triple-click the line below to select it:
    /Library/Caches/com.apple.appstore/adoption.plist
    Right-click or control-click the highlighted line and select Services ▹ Reveal from the contextual menu. A Finder window may open with a file selected. If it does, delete the selected file. You may be prompted for your login password.
    Then repeat step 4.
    6. Select Store ▹ View My Account from the App Store menu bar, then select View hidden purchases. If you're trying to update any hidden purchases, unhide them.
    7. Launch iTunes and select Store ▹ Authorize This Computer from the menu bar.
    8. If you've moved any App Store apps out of the applications folder, or into a subfolder, put them back. Never move or copy those applications.
    9. Contact Account and Billing Support on this page:
    Apple - Mac App Store - Contact Support

  • How do I know what version of iPhone I use? Is it 3, 4 or 5? I CSN not update to iOS 8!?

    i can not update to iOS 8? Have 7.1.2.

    ThoBer wrote:
    My iPad, on the contrary updates
    So?  Your iPad is obviously a model then that supports iOS 8, and your iPhone is not.  Why would you assume that two different devices would have to be compatible with the same iOS?

  • How to know what level of optimization to use / which symbols to remove

    I probably should have asked this question along time ago, but how do you know what level of optimization to use and what symbols you can safely remove when compiling

    EDLundquist wrote:
    I probably should have asked this question along time ago, but how do you know what level of optimization to use and what symbols you can safely remove when compiling
    I have no direct experience with development for Macs, but based on my experience on other platforms, I'd use lower optimization and symbol removal early in the debugging process, increasing those as the program becomes more stable.

  • How do you know what version Mac OSX is on ANOTHER drive?

    How do you know what version Mac OSX is on ANOTHER drive without starting that drive
    and seeing the system profiler? In fact, because the drive wont start up, Now I am wondering if it is pre-intel. ? CMD-I doesn't do it. Thanks

    Why mess with this? Well, I got the HDDs and the enclosure from my previous PPC, so I'd like to make use of it all without $pending again.
    I don't see any problems with using the card and drives on your new Mac. Hardware is too pricey to just leave behind if you can't help it. With the new drivers I suspect you'll be able to use your drives, I just don't think you'll be able to boot from them if the interface card requires drivers. They should still be very fast storage devices, and probably reliable due to the ongoing support the vendor has provided.
    I went through the same type of issue when I bought my Dual G4 1.42 Tower (upgraded from a Quadra 840AV ). Several of my devices were SCSI (I was into SCSI Wide/Fast drive arrays at the time for video capture), and I was able to use an Adaptec card for scanning for several years with Jaguar and Panther. I'd spent quite a bit of cash to ensure high quality and performance and didn't want to loose all of the investment. Eventually the SATA hard drives and other USB and Firewire replacements became so cheap and performance improved enough that loosing SCSI with Tiger was not a big deal. I do think I should get about 5 years of hardware compatibility with most products and I keep older Mac's around for dedicated services as long as they aren't a costly maintenance issue.

  • How to know what are the T Codes used by client in SAP HR module in  qualit

    hi experts,
    i have a access of quality server given by my client in SAP HR.I dont know what are the Tcodes used by client.So how i can know what are the Tcodes client is using frequently.i have to list out all TCodes urgently.
    PLZ reply ASAP.
    Thanx in advance..

    Hi
    You can do this by going to SUIM-Transactions-Executable for User
    Then give the user name/id as in user master record and execute.  Now the system will display the list of transaction codes used by that particular user.
    Regards
    Santhosh.S

  • After updating latest security update for my OSX 10.7.5 one of my usb port is not working now.how do i know what is cause that usb port is not working after security update

    one of usb port in my macbook pro havent work after i ve updated latest security update for osx 10.7.5, how do i know what is cause that usb port is good or bad

    On a Mac running v10.7.2, the only way to reinstall Safari is to reinstall OS X using OS X Recovery.
    Safari 5.1.1 is for Snow Leopard. It will not run on a Mac with v10.7 installed.

  • I'd like to replace my hard drive.  How do I know what to buy for my 15-inch early 2008 MacBook Pro?

    I am out of room on my hard drive.  I'd like to get a new hard drive and restore my data to the new drive from Time Machine.  How do I know what kind of hard drive to buy for my 15-inch, early 2008 MacBook Pro?  Also, how hard is this to do? 

    I have changed HDDs several times on the old MBP.  Currently it has a Hitachi 500 GB HDD that came out of my new one.  My adage is that one cannot have too much storage and I think that the 1TB HDD is an excellent choice.  Not only do you get generous capacity, the performance should be (theoretically) comparable to a 750 GB 7200 rpm HDD.  I will be very surprised if there are compatibility problems.
    If you bought the HDD from OWC, you should have received Installation instructions.  If not, go to the OWC website and look at the video.  I actually downloaded it so that I could hand write the instructions down step by step.  Also check out iFixit website.  They have step by step instructions that may prove to be useful.
    Tools you need:  00 Phillips and #6 Torx Drivers (get good ones).   The instructions make mention of a plastic pry bar (spudger).  I use a stiff piece of plastic like a credit card.
    Tips to keep in mind:  Get a large open table space and place a large clean towel on it.  That will protect your MBP and when you drop a screw (and you will) it will not bounce far so you will not have to spend an hour looking for it.
    As you take out a set of screws, keep them together (I use wide masking tape.  The little screws will stick to it.)
    Keep the sets in sequence.  That will make reassembly much, much easier.
    The most difficult steps are removing the keyboard from the MBP body and removing the ribbon cable from the mother board.  In case of the former, work from the back (the display) to the front.  You will initially have to pry it up and then do a lot of jiggling to remove it.  Don't be too timid about it.  At the end of the ribbon cable there is a rectangular connector.  Use your credit card to remove it.  Just pry it off.
    The #6 Torx driver is used to take off the 4 mounting pins on the HDD and if I remember correctly there is another place where it is needed, specifically in the battery compartment ( I think).  If the instructions don't say so, keep that in mind and inspect the screw before you select the driver.
    Good luck and make sure that you don't have parts left over.
    Ciao.

  • How do I know what files to remove from my Macbook Pro laptop?

    Apparently my hard drive is full and I need to remove files so I have space to download more music and movies.  I don't want to delete important files.  How do I go about doing this? 

    How do I know what files to remove from my Macbook Pro laptop?
    Remove only files you yourself stored on the laptop; files in your Home folder. Don't delete any files from the system libraries, and if you want to remove applications, use the provided uninstallers.
    For files in the media libraries - iTunes, iPhoto, iMovie use the application to delete music, photos, movies.
    If you are planning on storing more movies and music on your mac, deleting old files will probably not suffice alone to free enough space. Consider to get yourself an external drive to store your media.

  • ICalendar: How do I know what day, in month view, I am working on?

    The calendar in Mavericks is so frustrating compared to SL. How do I know what day, in month view, I am working on? There is no highlight or box or anything. Am I missing something? Also I suppose its not possible to just see 1 month anymore like it use to be instead of seeing 6 weeks. Thanks.  Sure wish Apple would let us keep our Macs the way WE like it with a classic setting everytime they add something that they think is better. Like those awesome grey icons all over the place instead of color.

    The day with the red line on top is today

  • How do we know what are all the fields  updated in a screen?

    Hi all,
             If i am making modifications in row details of sales order screen .for eg, <b>i am changing the quantity or price for a row</b> 
             I want to write log file for the updated fields for that particular sales order.
             <b> How do we know what are all the fields are updated ?</b>     
             If we can use SBOTransaction_Notification procedure.How to write code inside that.
             Please provide code example for that.I have downloaded the sample.But i donot know how to use 'Add code to here ' part.
             Please help me to solve this.Hope  your  reply soon
    Regards,
    V.Rangarajan

    Hi, V.Rangarajan!
    When the field in the matrix is filled with some value and the user moves to another field, the et_LOST_FOCUS event occurs. So, i think you can try to handle ItemEvents and use such code (for example):
    if (pVal.EventType == SAPbouiCOM.BoEventTypes.et_LOST_FOCUS && pVal.ItemUID == "38" && pVal.BeforeAction == false && pVal.FormType == 139)
    string ChangedColumnID = pVal.ColUID;
    int ChangedRowNumber = pVal.Row;
    and write the values to your log.
    "38" - is the matrix ID in the Orders form
    "139" - is the Orders form
    Also you can access to the value, that user had put into the field.
    Hope this helps!

  • How do you know what view is available to a form?

    A customer requirement that we set the a firstlogin attribute on the on one of the resources the first time a user logs into the IDM end user interface, changes their password, and provides answers for their authentication questions. The way I know that a person has done this, it that they are displayed the "End User Menu"
    The problem is the accounts portion of the User view is not accessible from the End User Menu. I put the same code in the End User Form and it works.
    Is there a way for me to access resource attributes from this form?
    Is this the incorrect approach to solving this problem?
    How do you know what view is available to a form?

    Thanks, that was my problem originally. When using a fieldref I had to set the base context to variables.user i.e.
    baseContext=':variables.user'
    And in workflow I had to preface variable names with the name of the object I checked the view out into.
    What I really wanted to know how to have multiple views open in a form if possible. I'd like to be able to manipulate user and role objects in the same form when editing users in a specific org.

  • When setting up a new ipad how do you know what your user name is?

    When setting up a new ipad how do you know what your user name is?

    How to set up Apple ID
    http://support.apple.com/kb/ht2731

  • Please help i bought an iphone from ebay and it is unlocked and refirbished by apple how do i know what sim card to buy for it? iPhone 3GS

    please help i bought an iphone from ebay and it is unlocked and refirbished by apple how do i know what sim card to buy for it? iPhone 3G

    Contact your chosen cellular provider to obtain a compatible SIM card.

Maybe you are looking for