How Do I Know What Element is Clicked in a WPF WebBrowser Control

Hi,
I am developing WPF Web browser based Application.
In which if someone browse www.msdn.com and clicked on "Make a suggestion" button the I want to know the id of the button clicked and name of the url on which user will be redirected.
Thanks.
Pritesh

WPF doesn't respond or subscribe to any kind of events that HTML elements within the web page may raise. The WebBrowser control is basically just a separate window that wraps an Internet Explorer within the WPF window and the web page that is displayed in
the browser lives it own life inside this "box".
You should handle these kind of things in the web page itself, for example using javascript.
What you could from a WPF side of things is to add and invoke javascripts on the loaded web page. Please refer to the following thread for more information about this:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/72f399b7-8c39-45f9-85ca-c683862c9b8c/prevent-the-selection-of-texts-webbrowser?forum=wpf
If you have any questions about how to write the actual javascripts you should ask at
http://forums.asp.net.
Please remember to close your threads by marking all helpful posts as answer and please start a new thread if you have a new question.

Similar Messages

  • C++ How to know what link is clicked on a Balloon tooltip after handle the TTN_LINKCLICK message

    switch (msg) {
    case WM_NOTIFY:
    NMHDR* nmhdr = (LPNMHDR)lparam;
    switch(nmhdr->code) {
    case TTN_LINKCLICK:
    <code>
    return TRUE;
    I'm able to trap the TTN_LINKCLICK notification. However I would like to retrieve the URL text link that was clicked.
    How to know what link is clicked on a Balloon tooltip after handle the TTN_LINKCLICK message ?
    MCunha

    Basically you don't know what link was clicked.  If you need more than one link, you may need to use a different UI element to display it, like a dialog or some sort of other popup window that you have control over.

  • How do I know what version of iTunes I have?

    Trying to download music from windows laptop...says my iPad iTunes needs to be version 11.1 or higher...how do I download latest version and how do I know what version I have?

    To find out what version you have, click on Help > About iTunes.
    To get the latest version, go to http://www.apple.com/itunes/download/

  • HT1338 how do I know what os version my mac has?

    How do I know what os version my mac has?

    Click on the  symbol on the top menu, and then About this Mac. It will say Mac OS version your have.

  • How do I know what os I have on my mac

    I am new to mac and this is probably a really stupid question but how do I know what os I have on my new mac book pro? or do I need to buy and download an os?

    Click on the Apple Icon. top left of the screen, click on About this Mac...
    You may also find these Links of Interest...
    Show me how to set up my Mac.
    http://www.apple.com/support/mac101/
    http://www.apple.com/support/switch101/     Switching from PC

  • How do i know what generation my ipod is

    how do i know what generation my ipod is - I want to download audio books from my library and they list ipod classic.  Will my ipod work?

    I think a 2004 iPod is probably 4th gen, which is also called "iPod (Click Wheel)" (b/w screen) or "iPod photo" (color screen).  This document shows all the models
    http://support.apple.com/kb/HT1353
    "iPod classic" is the name of the current 160GB iPod that uses a hard drive for storage.  However, it can also refer to ANY "classic design" iPod that uses a hard drive for storage, going back to the 1st gen iPod.
    If they are standard MP3 or AAC audio files (with no copy protection), and they play in iTunes, you should be able to sync them to an iPod and play them.

  • HT1338 I am new to mac,always had windows knowledge. how do I know what version I have in safari and what to upgrade to?

    I am new to mac and have an older ibook g4...mac os x version 10.4.11 processor 1.42 ghzz powerpc g4....to be exact/How do I know what version of safari I am using and what to upgrade to- if I believe I have {panther}? Im Lost anybody please?

    Take a look at TenFourFox.
    TenFourFox likes lots of memory. Max out your machine.
    tenfourfox -- It's a port of the latest FireFox to run on older hardware and software.
    "World's most advanced web browser. Finely tuned for the Power PC."
    http://www.floodgap.com/software/tenfourfox/
    alternative download site:
    http://www.macupdate.com/app/mac/37761/tenfourfox
    OmniWeb uses the lastest Safari framework.  The open source WebKit. Other browsers like Safari and iCab use the OS version of WebKit.  The OmniWeb downloaded dmg includes it's own copy of the latest WebKit.
    http://www.omnigroup.com/products/omniweb/
    Safari 4.1.3 for Tiger
    http://support.apple.com/kb/DL1069
    iCab - The Taxi for the Internet
    http://www.icab.de/
    Look at what is happenning with your Mac when you run Activity Monitor.
    Macintosh-HD -> Applications -> Utilities -> Activity Monitor
    Click on System Memory to get statistics on memory usage.  You should have some free memory.
    When you have lots of page outs more memory will be helpful.  My entry for entry for Page ins/outs is:
    Page ins/outs: 29163/0
    Notice I have 0 pageouts which says that I am not using my harddrive for extra memory space.  Thus, I have enough memory.
    Activity Monitor has a neat feature where it can display a dynamic dock icon.  In Activity Monitor View > Dock icon > Show cpu history.
    "Reading system memory usage in Activity Monitor :"
    http://docs.info.apple.com/article.html?artnum=107918
    http://developer.apple.com/documentation/Performance/Conceptual/ManagingMemory/A rticles/AboutMemory.html#//apple_ref/doc/uid/20001880
    See   Kappy
    http://discussions.apple.com/message.jspa?messageID=8025223#8025223
    Problems from insufficient RAM and free hard disk space
    http://thexlab.com/faqs/lackofram.html

  • How do I know what version?

    How do I know what version of Airport I'm using?

    If you are asking what version of AirPort Extreme that you have....
    Open AirPort Utility - Click Manual Setup
    Click on the AirPort Extreme on the left and info regarding what generation of product you have and what version of firmware is currently installed will appear to the right
    If you are asking what version of AirPort Utility that you have......
    When you have AirPort Utility open, click the AirPort Utility menu in the upper left hand corner of the the screen and then click About AirPort Utility

  • After updating latest security update for my OSX 10.7.5 one of my usb port is not working now.how do i know what is cause that usb port is not working after security update

    one of usb port in my macbook pro havent work after i ve updated latest security update for osx 10.7.5, how do i know what is cause that usb port is good or bad

    On a Mac running v10.7.2, the only way to reinstall Safari is to reinstall OS X using OS X Recovery.
    Safari 5.1.1 is for Snow Leopard. It will not run on a Mac with v10.7 installed.

  • I'd like to replace my hard drive.  How do I know what to buy for my 15-inch early 2008 MacBook Pro?

    I am out of room on my hard drive.  I'd like to get a new hard drive and restore my data to the new drive from Time Machine.  How do I know what kind of hard drive to buy for my 15-inch, early 2008 MacBook Pro?  Also, how hard is this to do? 

    I have changed HDDs several times on the old MBP.  Currently it has a Hitachi 500 GB HDD that came out of my new one.  My adage is that one cannot have too much storage and I think that the 1TB HDD is an excellent choice.  Not only do you get generous capacity, the performance should be (theoretically) comparable to a 750 GB 7200 rpm HDD.  I will be very surprised if there are compatibility problems.
    If you bought the HDD from OWC, you should have received Installation instructions.  If not, go to the OWC website and look at the video.  I actually downloaded it so that I could hand write the instructions down step by step.  Also check out iFixit website.  They have step by step instructions that may prove to be useful.
    Tools you need:  00 Phillips and #6 Torx Drivers (get good ones).   The instructions make mention of a plastic pry bar (spudger).  I use a stiff piece of plastic like a credit card.
    Tips to keep in mind:  Get a large open table space and place a large clean towel on it.  That will protect your MBP and when you drop a screw (and you will) it will not bounce far so you will not have to spend an hour looking for it.
    As you take out a set of screws, keep them together (I use wide masking tape.  The little screws will stick to it.)
    Keep the sets in sequence.  That will make reassembly much, much easier.
    The most difficult steps are removing the keyboard from the MBP body and removing the ribbon cable from the mother board.  In case of the former, work from the back (the display) to the front.  You will initially have to pry it up and then do a lot of jiggling to remove it.  Don't be too timid about it.  At the end of the ribbon cable there is a rectangular connector.  Use your credit card to remove it.  Just pry it off.
    The #6 Torx driver is used to take off the 4 mounting pins on the HDD and if I remember correctly there is another place where it is needed, specifically in the battery compartment ( I think).  If the instructions don't say so, keep that in mind and inspect the screw before you select the driver.
    Good luck and make sure that you don't have parts left over.
    Ciao.

  • How do I know what files to remove from my Macbook Pro laptop?

    Apparently my hard drive is full and I need to remove files so I have space to download more music and movies.  I don't want to delete important files.  How do I go about doing this? 

    How do I know what files to remove from my Macbook Pro laptop?
    Remove only files you yourself stored on the laptop; files in your Home folder. Don't delete any files from the system libraries, and if you want to remove applications, use the provided uninstallers.
    For files in the media libraries - iTunes, iPhoto, iMovie use the application to delete music, photos, movies.
    If you are planning on storing more movies and music on your mac, deleting old files will probably not suffice alone to free enough space. Consider to get yourself an external drive to store your media.

  • ICalendar: How do I know what day, in month view, I am working on?

    The calendar in Mavericks is so frustrating compared to SL. How do I know what day, in month view, I am working on? There is no highlight or box or anything. Am I missing something? Also I suppose its not possible to just see 1 month anymore like it use to be instead of seeing 6 weeks. Thanks.  Sure wish Apple would let us keep our Macs the way WE like it with a classic setting everytime they add something that they think is better. Like those awesome grey icons all over the place instead of color.

    The day with the red line on top is today

  • How do we know what are all the fields  updated in a screen?

    Hi all,
             If i am making modifications in row details of sales order screen .for eg, <b>i am changing the quantity or price for a row</b> 
             I want to write log file for the updated fields for that particular sales order.
             <b> How do we know what are all the fields are updated ?</b>     
             If we can use SBOTransaction_Notification procedure.How to write code inside that.
             Please provide code example for that.I have downloaded the sample.But i donot know how to use 'Add code to here ' part.
             Please help me to solve this.Hope  your  reply soon
    Regards,
    V.Rangarajan

    Hi, V.Rangarajan!
    When the field in the matrix is filled with some value and the user moves to another field, the et_LOST_FOCUS event occurs. So, i think you can try to handle ItemEvents and use such code (for example):
    if (pVal.EventType == SAPbouiCOM.BoEventTypes.et_LOST_FOCUS && pVal.ItemUID == "38" && pVal.BeforeAction == false && pVal.FormType == 139)
    string ChangedColumnID = pVal.ColUID;
    int ChangedRowNumber = pVal.Row;
    and write the values to your log.
    "38" - is the matrix ID in the Orders form
    "139" - is the Orders form
    Also you can access to the value, that user had put into the field.
    Hope this helps!

  • How do you know what view is available to a form?

    A customer requirement that we set the a firstlogin attribute on the on one of the resources the first time a user logs into the IDM end user interface, changes their password, and provides answers for their authentication questions. The way I know that a person has done this, it that they are displayed the "End User Menu"
    The problem is the accounts portion of the User view is not accessible from the End User Menu. I put the same code in the End User Form and it works.
    Is there a way for me to access resource attributes from this form?
    Is this the incorrect approach to solving this problem?
    How do you know what view is available to a form?

    Thanks, that was my problem originally. When using a fieldref I had to set the base context to variables.user i.e.
    baseContext=':variables.user'
    And in workflow I had to preface variable names with the name of the object I checked the view out into.
    What I really wanted to know how to have multiple views open in a form if possible. I'd like to be able to manipulate user and role objects in the same form when editing users in a specific org.

  • How do you know what version Mac OSX is on ANOTHER drive?

    How do you know what version Mac OSX is on ANOTHER drive without starting that drive
    and seeing the system profiler? In fact, because the drive wont start up, Now I am wondering if it is pre-intel. ? CMD-I doesn't do it. Thanks

    Why mess with this? Well, I got the HDDs and the enclosure from my previous PPC, so I'd like to make use of it all without $pending again.
    I don't see any problems with using the card and drives on your new Mac. Hardware is too pricey to just leave behind if you can't help it. With the new drivers I suspect you'll be able to use your drives, I just don't think you'll be able to boot from them if the interface card requires drivers. They should still be very fast storage devices, and probably reliable due to the ongoing support the vendor has provided.
    I went through the same type of issue when I bought my Dual G4 1.42 Tower (upgraded from a Quadra 840AV ). Several of my devices were SCSI (I was into SCSI Wide/Fast drive arrays at the time for video capture), and I was able to use an Adaptec card for scanning for several years with Jaguar and Panther. I'd spent quite a bit of cash to ensure high quality and performance and didn't want to loose all of the investment. Eventually the SATA hard drives and other USB and Firewire replacements became so cheap and performance improved enough that loosing SCSI with Tiger was not a big deal. I do think I should get about 5 years of hardware compatibility with most products and I keep older Mac's around for dedicated services as long as they aren't a costly maintenance issue.

Maybe you are looking for