How do I know what PAL version CS4 has just created for me?

And where do I get the appropriate PAL logo to go on my DVD series I've just produced.
Do I need the Dolby Digital Sound Logo? An ISBN barcode?
Now that I'm doing the slick there are suddenly a whole lot of questions I don't have answers for.
I'm from New Zealand if that helps for specific information.
Help. Our deadline is coming up real fast.

You mean this: http://www.fusecon.com/pubs/txtfiles/dvdstuff/ADALOGODEMO.pdf
You can download them here: http://www.fusecon.com/pubs/txtfiles/DVDCreation.htm
Google is your friend.

Similar Messages

HT1338 how do I know what os version my mac has?

How do I know what os version my mac has?

Click on the  symbol on the top menu, and then About this Mac. It will say Mac OS version your have.

How do I know what beta version i have

My iPhone and iTunes won't "start" the sync and I've seen the posts related to different beta versions causing this. How do I know which beta versions I have?

Identify iPad Models...
http://support.apple.com/kb/HT5452

770 How Do I know What OS version I have?

Hello
Just bought the 770 today. How do I know if I have OS 2005 or OS 2006.

When I click on Device, I obtain two tabs: Name and About Product. When I click on the About Product tab, I obtain just the message "Value must be defined", which I think is from the Name tab, which is requesting "my device's name".
I enter a name into that field, and click ok, but that name is not being saved. The result is that I cannot activate the About product tab, so I do not know what version I have - I think it is from 2005.

How can I know the new Material Master has been created?

Does anyone have been tried about how to trigger the new Material Master has been created at a time interaval(maybe an hour or a day)?
I want to transfer the new Material Master within a given period from SAP R/3 4.6C to .NET Application through standard BAPI or RFC and .NET Connector 2.0. How can I do?
Any suggestion is wellcome. Thank You.

Thank you Jiri Ehrlich for answering my question..
I choose the third way as you suggest..
".. 3) Create your own ABAP function to export whole Material Master, call this function from your .NET application and do synchronizing on .NET side (so your .NET application will be RFC client).."
I've tried RFC that retrieve Material Detail by using BAPI_MATERIAL_GETLIST. It works fine but if I want to retrive the new Material or modified within a given period of time(for example 15 or 30 minutes). How I can do? Is there any standard BAPI or RFC to call from .NET or I have to write new RFC.
I have little background of ABAP so help me please. If I have to create new RFC, is there any ABAP Function to call or which table I can retrive those information.
Anyone can suggest?? Thanks in advance

How do I know what iOS version my app is built with?

I am using App Builder V32.1, is my app built with iOS8 or iOS8.1?

Welcome to the forum.
Since you can only sync your ipod with one computer, the only music that would normally be in your computer's iTunes library besides what's on your touch, is what you purchased from the iTunes store using your touch. You can [Transfer Purchases|http://support.apple.com/kb/HT1848?viewlocale=en_US] to get those over into your computer.
If you've been manually managing music and putting music over on your touch from multiple computers, you will not only have to manually figure out which ones are not on your computer, you will need to get a third party option to transfer them over as iTunes will only let you transfer iTunes purchases to your computer.
Hope this answers your question.

How do I know what kind of Airport card I need for my computer?

I have a Mac Pro 2.66ghz I purchased new in 4/07 that is operating with Tiger 10.4. I want it to be able to communicate wirelessly from my router. Is all I need an Airport card? If so, which one am I supposed to get?
Thanks in advance!

BDAqua wrote:
This looks like the one...
http://store.fastmac.com/productinfo.php?cPath=10_11_39&productsid=207
But for that kind of money you might like one of these better...
http://eshop.macsales.com/item/Newer%20Technology/MXP2802NU2C/
http://eshop.macsales.com/item/Newer%20Technology/MXP2802GU2/
http://eshop.macsales.com/item/Newer%20Technology/MXP2802GU2OB/
Thank you. I have a desktop. Do these USB ones perform as well as the cards?

I'd like to replace my hard drive. How do I know what to buy for my 15-inch early 2008 MacBook Pro?

I am out of room on my hard drive. I'd like to get a new hard drive and restore my data to the new drive from Time Machine. How do I know what kind of hard drive to buy for my 15-inch, early 2008 MacBook Pro? Also, how hard is this to do?

I have changed HDDs several times on the old MBP. Currently it has a Hitachi 500 GB HDD that came out of my new one. My adage is that one cannot have too much storage and I think that the 1TB HDD is an excellent choice. Not only do you get generous capacity, the performance should be (theoretically) comparable to a 750 GB 7200 rpm HDD. I will be very surprised if there are compatibility problems.
If you bought the HDD from OWC, you should have received Installation instructions. If not, go to the OWC website and look at the video. I actually downloaded it so that I could hand write the instructions down step by step. Also check out iFixit website. They have step by step instructions that may prove to be useful.
Tools you need: 00 Phillips and #6 Torx Drivers (get good ones). The instructions make mention of a plastic pry bar (spudger). I use a stiff piece of plastic like a credit card.
Tips to keep in mind: Get a large open table space and place a large clean towel on it. That will protect your MBP and when you drop a screw (and you will) it will not bounce far so you will not have to spend an hour looking for it.
As you take out a set of screws, keep them together (I use wide masking tape. The little screws will stick to it.)
Keep the sets in sequence. That will make reassembly much, much easier.
The most difficult steps are removing the keyboard from the MBP body and removing the ribbon cable from the mother board. In case of the former, work from the back (the display) to the front. You will initially have to pry it up and then do a lot of jiggling to remove it. Don't be too timid about it. At the end of the ribbon cable there is a rectangular connector. Use your credit card to remove it. Just pry it off.
The #6 Torx driver is used to take off the 4 mounting pins on the HDD and if I remember correctly there is another place where it is needed, specifically in the battery compartment ( I think). If the instructions don't say so, keep that in mind and inspect the screw before you select the driver.
Good luck and make sure that you don't have parts left over.
Ciao.

How can I determine what software version I have in my Apple TV module?

My Apple TV usually hangs up when I am watching a movie on Netflix whether its one foot from my internet hub or in the next room. When I stream using an HDMI cable connected directly to my computer (which is hardwired to the hub) there is no problem. Could it be an outdated software version in the Apple TV module? How does one tell what software version he has and then how do I update it if required?
Any help is appreciated.

settings-->general--->about

How do I know what programs I can quit in the activity monitor?

I use a macbook 13in and run lion. Last night, I checked out the actiivty monitor and there were programs/files(?) I didn't recognize. I understand that some of these are important and quitting them may cause problems. How do I know what programs I can quit? Thanks for the help!

HellO:
IMHO, you should not quit anything. In fact, looking at the activity monitor if nothing is wrong is, IMHO, a waste of time.
Barry

How to know weather Vendor ID has been created for a Particular employee

HI Experts,
We have got ticket from emploee pertaining to his Vendor Id.
How we can check weather the vendor Id has been created for him.
What is the transaction code we use to check this.
Thanks in advance.
Sairam.

Hi,
For this you need to go for coustom only..
Before the following should be identify.
1. Personnel number should be assign in vendor master single field only because in vendor master there are five fields can mapp with personnel number.
2. For vendor creation of employee should have different vendor group in Vedor master
3. vender nuber range must be same as Employee number range.
Based on above conditions you can create coustom report.

How do you know what version Mac OSX is on ANOTHER drive?

How do you know what version Mac OSX is on ANOTHER drive without starting that drive
and seeing the system profiler? In fact, because the drive wont start up, Now I am wondering if it is pre-intel. ? CMD-I doesn't do it. Thanks

Why mess with this? Well, I got the HDDs and the enclosure from my previous PPC, so I'd like to make use of it all without $pending again.
I don't see any problems with using the card and drives on your new Mac. Hardware is too pricey to just leave behind if you can't help it. With the new drivers I suspect you'll be able to use your drives, I just don't think you'll be able to boot from them if the interface card requires drivers. They should still be very fast storage devices, and probably reliable due to the ongoing support the vendor has provided.
I went through the same type of issue when I bought my Dual G4 1.42 Tower (upgraded from a Quadra 840AV ). Several of my devices were SCSI (I was into SCSI Wide/Fast drive arrays at the time for video capture), and I was able to use an Adaptec card for scanning for several years with Jaguar and Panther. I'd spent quite a bit of cash to ensure high quality and performance and didn't want to loose all of the investment. Eventually the SATA hard drives and other USB and Firewire replacements became so cheap and performance improved enough that loosing SCSI with Tiger was not a big deal. I do think I should get about 5 years of hardware compatibility with most products and I keep older Mac's around for dedicated services as long as they aren't a costly maintenance issue.

How do i know what version of the Firmware Upgrade 1.01

Op
ps.
What i was trying to say is how do i know what version of the firmware does my player have installed on it,
I have a 28mb MuVo V200 and i was thinking of downloading the Firmware Upgrade .0.03 but i do not know if my player already has iMessage Edited by The_D_AUS on 05-0-2005 07:45 PM

Just access the player Menu and then scroll to the option 'Setting'->'Information'.
Jason

HT4759 How do I know what version I'm running on my iPad?

How do I know what version is running on my iPad?

Rose May wrote:
Can it be upgraded?
You have not supplied any Information...
But See Here... How to update your iPhone, iPad, or iPod touch

How do you know what version of OS X you have on your Mac Mini?

How do you know what version of OS X you have on your Mac Mini?

Apple Menu (upper left on meu bar) > About This Mac
"Verion: " 10.8.x is Mountain Lion, 10.7.x is Lion, 10.9.x is Mavericks, 10.6 x is Snow Leopard.

How do I know what PAL version CS4 has just created for me?

Similar Messages

Maybe you are looking for