How do I know what to put in when it says server when setting up?

I have tried the IPv4 address, and many others but I can't find one that works. I am presuming that the "Name" is your computers Host name and the password is the Host password. Can someone please help? I'm really lost, it would be simple apart from the fact I don't know what to put in

If your like me and dont know how you find the IP address her how!
Click on Network preference and it will take you to it
and there you have it!
I know its late but i just wanted to say it because i hate not knowing!

Similar Messages

ICloud I do not want to share some documents in the cloud. I f I turn off iCloud it says I will delete everything already there. How do I know what is already in the cloud

iCloud I do not want to share some documents in the cloud. I f I turn off iCloud it says I will delete everything already there. How do I know what is already in the cloud

Thank you. When I go into system preferences, then iCloud, then manage, it does not let me view what is there only says: ex: The documents stored inside Pages take up 623.3KB and gives me the option to: Delete Documents and Data. It does not let me see what files are there. I think it is time for me to go back to my apple store and get more acquainted with iCloud and storage and how to manage it. I had some issues with my mac about a month ago after downloading an updated version. The issue was related to syncing, iCloud, iTunes, calendar and storage. I am nervous about loosing more documents, photos, etc..from my Mac. Thank you for the information.

I have completely lost my safari. I was getting an error and I lost the address bar. I tried to fix it by changing the home page on the preferences. I don't know what to put in the home page now. How do I get safari back?

I have completely lost my safari. I was getting an error and I lost the address bar. I tried to fix it by changing the home page on the preferences. I don't know what to put in the home page now. How do I get safari back?

I tried editing my first post but couldn't get there...
If you can open Safari go to the top of your screen, click Safari / Preferences then select the General stab. You can type in the web address for your Home page there.

How do we know what are all the fields updated in a screen?

Hi all,
         If i am making modifications in row details of sales order screen .for eg, <b>i am changing the quantity or price for a row</b>
         I want to write log file for the updated fields for that particular sales order.
         <b> How do we know what are all the fields are updated ?</b>
         If we can use SBOTransaction_Notification procedure.How to write code inside that.
         Please provide code example for that.I have downloaded the sample.But i donot know how to use 'Add code to here ' part.
         Please help me to solve this.Hope your reply soon
Regards,
V.Rangarajan

Hi, V.Rangarajan!
When the field in the matrix is filled with some value and the user moves to another field, the et_LOST_FOCUS event occurs. So, i think you can try to handle ItemEvents and use such code (for example):
if (pVal.EventType == SAPbouiCOM.BoEventTypes.et_LOST_FOCUS && pVal.ItemUID == "38" && pVal.BeforeAction == false && pVal.FormType == 139)
string ChangedColumnID = pVal.ColUID;
int ChangedRowNumber = pVal.Row;
and write the values to your log.
"38" - is the matrix ID in the Orders form
"139" - is the Orders form
Also you can access to the value, that user had put into the field.
Hope this helps!

How do you know what view is available to a form?

A customer requirement that we set the a firstlogin attribute on the on one of the resources the first time a user logs into the IDM end user interface, changes their password, and provides answers for their authentication questions. The way I know that a person has done this, it that they are displayed the "End User Menu"
The problem is the accounts portion of the User view is not accessible from the End User Menu. I put the same code in the End User Form and it works.
Is there a way for me to access resource attributes from this form?
Is this the incorrect approach to solving this problem?
How do you know what view is available to a form?

Thanks, that was my problem originally. When using a fieldref I had to set the base context to variables.user i.e.
baseContext=':variables.user'
And in workflow I had to preface variable names with the name of the object I checked the view out into.
What I really wanted to know how to have multiple views open in a form if possible. I'd like to be able to manipulate user and role objects in the same form when editing users in a specific org.

How do i know what gen of ipad i have?

How do i know what gen of ipad i have?

Put in the serial number here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do

How do i know what apps i can have on my ipod

I was wondering how do i know what apps i can put on my 2G ipod touch

Look in the requirements section of the App in the App store entry. Since your iPod can be updated to iOS level 4.2.1 most Apps should run on it with that level operating system.

After updating latest security update for my OSX 10.7.5 one of my usb port is not working now.how do i know what is cause that usb port is not working after security update

one of usb port in my macbook pro havent work after i ve updated latest security update for osx 10.7.5, how do i know what is cause that usb port is good or bad

On a Mac running v10.7.2, the only way to reinstall Safari is to reinstall OS X using OS X Recovery.
Safari 5.1.1 is for Snow Leopard. It will not run on a Mac with v10.7 installed.

I'd like to replace my hard drive. How do I know what to buy for my 15-inch early 2008 MacBook Pro?

I am out of room on my hard drive. I'd like to get a new hard drive and restore my data to the new drive from Time Machine. How do I know what kind of hard drive to buy for my 15-inch, early 2008 MacBook Pro? Also, how hard is this to do?

I have changed HDDs several times on the old MBP. Currently it has a Hitachi 500 GB HDD that came out of my new one. My adage is that one cannot have too much storage and I think that the 1TB HDD is an excellent choice. Not only do you get generous capacity, the performance should be (theoretically) comparable to a 750 GB 7200 rpm HDD. I will be very surprised if there are compatibility problems.
If you bought the HDD from OWC, you should have received Installation instructions. If not, go to the OWC website and look at the video. I actually downloaded it so that I could hand write the instructions down step by step. Also check out iFixit website. They have step by step instructions that may prove to be useful.
Tools you need: 00 Phillips and #6 Torx Drivers (get good ones). The instructions make mention of a plastic pry bar (spudger). I use a stiff piece of plastic like a credit card.
Tips to keep in mind: Get a large open table space and place a large clean towel on it. That will protect your MBP and when you drop a screw (and you will) it will not bounce far so you will not have to spend an hour looking for it.
As you take out a set of screws, keep them together (I use wide masking tape. The little screws will stick to it.)
Keep the sets in sequence. That will make reassembly much, much easier.
The most difficult steps are removing the keyboard from the MBP body and removing the ribbon cable from the mother board. In case of the former, work from the back (the display) to the front. You will initially have to pry it up and then do a lot of jiggling to remove it. Don't be too timid about it. At the end of the ribbon cable there is a rectangular connector. Use your credit card to remove it. Just pry it off.
The #6 Torx driver is used to take off the 4 mounting pins on the HDD and if I remember correctly there is another place where it is needed, specifically in the battery compartment ( I think). If the instructions don't say so, keep that in mind and inspect the screw before you select the driver.
Good luck and make sure that you don't have parts left over.
Ciao.

How do I know what files to remove from my Macbook Pro laptop?

Apparently my hard drive is full and I need to remove files so I have space to download more music and movies. I don't want to delete important files. How do I go about doing this?

How do I know what files to remove from my Macbook Pro laptop?
Remove only files you yourself stored on the laptop; files in your Home folder. Don't delete any files from the system libraries, and if you want to remove applications, use the provided uninstallers.
For files in the media libraries - iTunes, iPhoto, iMovie use the application to delete music, photos, movies.
If you are planning on storing more movies and music on your mac, deleting old files will probably not suffice alone to free enough space. Consider to get yourself an external drive to store your media.

ICalendar: How do I know what day, in month view, I am working on?

The calendar in Mavericks is so frustrating compared to SL. How do I know what day, in month view, I am working on? There is no highlight or box or anything. Am I missing something? Also I suppose its not possible to just see 1 month anymore like it use to be instead of seeing 6 weeks. Thanks. Sure wish Apple would let us keep our Macs the way WE like it with a classic setting everytime they add something that they think is better. Like those awesome grey icons all over the place instead of color.

The day with the red line on top is today

How do you know what version Mac OSX is on ANOTHER drive?

How do you know what version Mac OSX is on ANOTHER drive without starting that drive
and seeing the system profiler? In fact, because the drive wont start up, Now I am wondering if it is pre-intel. ? CMD-I doesn't do it. Thanks

Why mess with this? Well, I got the HDDs and the enclosure from my previous PPC, so I'd like to make use of it all without $pending again.
I don't see any problems with using the card and drives on your new Mac. Hardware is too pricey to just leave behind if you can't help it. With the new drivers I suspect you'll be able to use your drives, I just don't think you'll be able to boot from them if the interface card requires drivers. They should still be very fast storage devices, and probably reliable due to the ongoing support the vendor has provided.
I went through the same type of issue when I bought my Dual G4 1.42 Tower (upgraded from a Quadra 840AV ). Several of my devices were SCSI (I was into SCSI Wide/Fast drive arrays at the time for video capture), and I was able to use an Adaptec card for scanning for several years with Jaguar and Panther. I'd spent quite a bit of cash to ensure high quality and performance and didn't want to loose all of the investment. Eventually the SATA hard drives and other USB and Firewire replacements became so cheap and performance improved enough that loosing SCSI with Tiger was not a big deal. I do think I should get about 5 years of hardware compatibility with most products and I keep older Mac's around for dedicated services as long as they aren't a costly maintenance issue.

When setting up a new ipad how do you know what your user name is?

When setting up a new ipad how do you know what your user name is?

How to set up Apple ID
http://support.apple.com/kb/ht2731

Please help i bought an iphone from ebay and it is unlocked and refirbished by apple how do i know what sim card to buy for it? iPhone 3GS

please help i bought an iphone from ebay and it is unlocked and refirbished by apple how do i know what sim card to buy for it? iPhone 3G

Contact your chosen cellular provider to obtain a compatible SIM card.

How do i know what version of the Firmware Upgrade 1.01

Op
ps.
What i was trying to say is how do i know what version of the firmware does my player have installed on it,
I have a 28mb MuVo V200 and i was thinking of downloading the Firmware Upgrade .0.03 but i do not know if my player already has iMessage Edited by The_D_AUS on 05-0-2005 07:45 PM

Just access the player Menu and then scroll to the option 'Setting'->'Information'.
Jason

How do I know what to put in when it says server when setting up?

Similar Messages

Maybe you are looking for