How do I know what transactions executed by specific user for last month

All
We have a request to find out what transactions are executed by secific user
for last couple of months.
Is there any report in SAP would tell me ?
Please advise.
From
PT.

Hello PT,
If you use the search for the term "How do I know what transactions executed by specific user for last month" then I guarantee you some good hits in the result, and further more detailed search terms to use...
Cheers,
Julius
(this time in response to the correct thread...)

Similar Messages

How can i know what transaction is handle by the TM?

How can i know what transaction is handle by the TM?

Hi;
Please see below
E-Business Oracle Trade Management Product Information Center [ID 1297829.1]
Regard
Helios

How do I know what is the minimum resource requirement for OLAP 11g?

How do I know for OLAP 11gR1 ...
1. what is the minimum number of CPUs and speed required
2. how much minimum physical memory, SGA, PGA etc. is required?
Regards, Anirban

Hello Anirban,
In summary, since the OLAP option is an option to Oracle Database 11g, Enterprise Edition the minimum requirements in order to run the database would be identical to those necessary to run a "Data Warehousing" type installation. That being said starting up a database is a far cry from actually performing well while accessing and building OLAP Cubes in your Database.
There are lots of things to consider. For example: the complexity of your model; data sparcity; level of aggregation; system load, SLAs, etc..
Lets look at true minimum requirements and then consider what it would take to achieve good performance in your environment
TRUE MINIMUM...
I performed a test in my environment (Oracle Database 11g Release 2 (11.2.0.2.0) on Oracle Enterprise Linux 5.5) using Analytic Workspace Manager 11.2.0.2.0A and found the following minimum settings to work against the OLAPTRAIN schema (You may find it here http://www.oracle.com/technetwork/database/options/olap/index.html). This is a very small schema which we use for demonstration purposes.
I discovered that the database started with a memory_target of only 160m (apparently this is the absolute minimum for my environment). I knew that if the database successfully started that I would be able to query the Cube but maintain it? Running queries against the OLAPTRAIN Sales Cube, despite being slow, worked as anticipated. Next, I performed a maintain operation on the Sales Cube where I had to abort the job because it ran into memory issues at 160m, however, when I increased it to only 180m it did a complete maintain in a reasonable timeframe, albeit slow considering the limited resources.
MINIMUM REQUIREMENTS TO ENSURE REASONABLE PERFORMANCE IN YOUR ENVIRONMENT
Most importantly ensure you have a good cube design
Run a sample set of your data in order to define what "reasonable performance" is for your environment. Create a small representative cube in order to test both build and query performance while collecting and analyzing database statistics through AWR and ADDM. For OLAP option specific queries please take a look at http://wiki.oracle.com/page/OLAP+option+-DBASample+Scripts.
You could creat a view on top of your fact table and use the view to generate your OLAP Cube. This will allow you to test a more manageable amount of data. For example, if you have 10 years of data and want to determine the footprint and resources required in order to manage a Cube of this volume then consider scoping it down to a few months first then increase it by a measured amount in order to predict requirements. Monitor your resources and ensure you balance I/O, memory and processors. Since the OLAP option is a Enterprise Edition option it falls under Data Warehousing. As such there is plenty of literature available on oracle.com in order to define what it takes to achieve a balanced Data Warehouse.
I would recommend contacting Oracle Consulting or an Oracle Partner to determine the best fit for your environment.

How can I know what objects are under specific tablesapce?

Dear all,
I want to find out how many tables are under "SYSAPPL" tablespace. How can I know that?
Please advice,
Amy

Assuming you have appropriate privileges,
SELECT COUNT(*)
FROM dba_tables
WHERE tablespace_name = 'SYSAPPL'If you don't have access to DBA_TABLES, you may be able to use USER_TABLES or ALL_TABLES, but that may miss objects that are in that tablespace that you don't have access to.
Justin

HT4759 How do I know what version iPad I have? For cloud

Kneed help setting up cloud? I have ipad2 do not know version? How do I find out? Have iPhone 5 and have installed cloud but cannot figure out how to on iPad?

Go to Settings > General > About > Version. iOS 5 or later is required for iCloud. If you have iOS 4 or earlier, you will need to connect the iPad to iTunes and update to the latest version (presently iOS 6.1.3).

How do I know what my current is of Firefox for my Desktop? Can Firefox see what version I have?

Had some difficulty updating to 4.0. In the process popped up on my desktop were multiple icons and update buttons. How do I confirm I have succeeded in installing 4.0? Firefox continues to remind me to update to 4.0? Can't Firefox "see" I have updated to 4.0 or is that reminder for someone else

Go to '''Help '''| '''About Firefox'''. It will show in there which version your have installed which appears to be 4.0.1
You can disable the reminders by clicking the Firefox button, go to Options | Options | Advanced and in the Update tab, uncheck Firefox at the top.
This means you'll have to check manually from time to time whether any new releases have become available.
Firefox 5.0 will be released on June 21.

How do I know what Oracle products I need installed for Oracle Text to work

I get the following errors from a VB application when trying to access the Oracle Text procedures:
Oracle Error: -20000
ORA-20000: Oracle Text error:
ORA-02074: cannot ROLLBACK in a distributed transaction
ORA-06512: at "CTXSYS.CTX_DOC", line 483
ORA-02074: cannot SET SAVEPOINT in a distributed transaction
DRG-10816: display/highlight call failed
ORA-02074: cannot SET SAVEPOINT in a distributed transaction
I need to resolve this ASAP

Oracle Text is part of the database. Try the quick start sample (http://otn.oracle.com/products/text/x/Samples/Quick_Start/index.html) and check if a sql-contains statement works.

How can I give administration permissions to a specific user+group on wiki?

How do I give administration capabilities to a specific user for only ONE specific group on my wiki server, not all of them.
Anyone know the simplest way to do this?

Really all I'm looking to do is to keep my web site exactly the same but limit the reading and writing capabilities of some users on specific groups/wiki pages/blogs but still allow them to read and write to other specific ones that somehow I would designate.
For example: I'm setting up a group for multiple users (about 15), and they each have their own page within that group, however i want to give them very limited administration capabilities on the site, all I want them to be able to do is to edit their own page, NOTHING else in the group
there's gotta be a way to do this without 3rd party software installation that seems complicated enough on it's own, isn't administration capabilities a fundamental part of wikis?
Someone has to have gone through something similar, any help?

How to find out what t-code(s) a user executes most?

Can anybody tell me how I can find out what transaction(s) a given user executes most from the all the transactions that given user has access to? For example if a user has access to 100 t-codes, but only uses 10 of them then, how can I find out that the user never executes rest of the 90 t-codes? Is there a report I can run to find out. Please help.

Hi Amit,
STAD is giving me nothing, even though I chose the date 05/03/2007. I also selected both radio buttons at the bottom. Here's message I am getting "No statistical record for any server found with given criteria"
Regards,
Chandu

After updating latest security update for my OSX 10.7.5 one of my usb port is not working now.how do i know what is cause that usb port is not working after security update

one of usb port in my macbook pro havent work after i ve updated latest security update for osx 10.7.5, how do i know what is cause that usb port is good or bad

On a Mac running v10.7.2, the only way to reinstall Safari is to reinstall OS X using OS X Recovery.
Safari 5.1.1 is for Snow Leopard. It will not run on a Mac with v10.7 installed.

I'd like to replace my hard drive. How do I know what to buy for my 15-inch early 2008 MacBook Pro?

I am out of room on my hard drive. I'd like to get a new hard drive and restore my data to the new drive from Time Machine. How do I know what kind of hard drive to buy for my 15-inch, early 2008 MacBook Pro? Also, how hard is this to do?

I have changed HDDs several times on the old MBP. Currently it has a Hitachi 500 GB HDD that came out of my new one. My adage is that one cannot have too much storage and I think that the 1TB HDD is an excellent choice. Not only do you get generous capacity, the performance should be (theoretically) comparable to a 750 GB 7200 rpm HDD. I will be very surprised if there are compatibility problems.
If you bought the HDD from OWC, you should have received Installation instructions. If not, go to the OWC website and look at the video. I actually downloaded it so that I could hand write the instructions down step by step. Also check out iFixit website. They have step by step instructions that may prove to be useful.
Tools you need: 00 Phillips and #6 Torx Drivers (get good ones). The instructions make mention of a plastic pry bar (spudger). I use a stiff piece of plastic like a credit card.
Tips to keep in mind: Get a large open table space and place a large clean towel on it. That will protect your MBP and when you drop a screw (and you will) it will not bounce far so you will not have to spend an hour looking for it.
As you take out a set of screws, keep them together (I use wide masking tape. The little screws will stick to it.)
Keep the sets in sequence. That will make reassembly much, much easier.
The most difficult steps are removing the keyboard from the MBP body and removing the ribbon cable from the mother board. In case of the former, work from the back (the display) to the front. You will initially have to pry it up and then do a lot of jiggling to remove it. Don't be too timid about it. At the end of the ribbon cable there is a rectangular connector. Use your credit card to remove it. Just pry it off.
The #6 Torx driver is used to take off the 4 mounting pins on the HDD and if I remember correctly there is another place where it is needed, specifically in the battery compartment ( I think). If the instructions don't say so, keep that in mind and inspect the screw before you select the driver.
Good luck and make sure that you don't have parts left over.
Ciao.

How do I know what files to remove from my Macbook Pro laptop?

Apparently my hard drive is full and I need to remove files so I have space to download more music and movies. I don't want to delete important files. How do I go about doing this?

How do I know what files to remove from my Macbook Pro laptop?
Remove only files you yourself stored on the laptop; files in your Home folder. Don't delete any files from the system libraries, and if you want to remove applications, use the provided uninstallers.
For files in the media libraries - iTunes, iPhoto, iMovie use the application to delete music, photos, movies.
If you are planning on storing more movies and music on your mac, deleting old files will probably not suffice alone to free enough space. Consider to get yourself an external drive to store your media.

ICalendar: How do I know what day, in month view, I am working on?

The calendar in Mavericks is so frustrating compared to SL. How do I know what day, in month view, I am working on? There is no highlight or box or anything. Am I missing something? Also I suppose its not possible to just see 1 month anymore like it use to be instead of seeing 6 weeks. Thanks. Sure wish Apple would let us keep our Macs the way WE like it with a classic setting everytime they add something that they think is better. Like those awesome grey icons all over the place instead of color.

The day with the red line on top is today

How do we know what are all the fields updated in a screen?

Hi all,
         If i am making modifications in row details of sales order screen .for eg, <b>i am changing the quantity or price for a row</b>
         I want to write log file for the updated fields for that particular sales order.
         <b> How do we know what are all the fields are updated ?</b>
         If we can use SBOTransaction_Notification procedure.How to write code inside that.
         Please provide code example for that.I have downloaded the sample.But i donot know how to use 'Add code to here ' part.
         Please help me to solve this.Hope your reply soon
Regards,
V.Rangarajan

Hi, V.Rangarajan!
When the field in the matrix is filled with some value and the user moves to another field, the et_LOST_FOCUS event occurs. So, i think you can try to handle ItemEvents and use such code (for example):
if (pVal.EventType == SAPbouiCOM.BoEventTypes.et_LOST_FOCUS && pVal.ItemUID == "38" && pVal.BeforeAction == false && pVal.FormType == 139)
string ChangedColumnID = pVal.ColUID;
int ChangedRowNumber = pVal.Row;
and write the values to your log.
"38" - is the matrix ID in the Orders form
"139" - is the Orders form
Also you can access to the value, that user had put into the field.
Hope this helps!

How do you know what view is available to a form?

A customer requirement that we set the a firstlogin attribute on the on one of the resources the first time a user logs into the IDM end user interface, changes their password, and provides answers for their authentication questions. The way I know that a person has done this, it that they are displayed the "End User Menu"
The problem is the accounts portion of the User view is not accessible from the End User Menu. I put the same code in the End User Form and it works.
Is there a way for me to access resource attributes from this form?
Is this the incorrect approach to solving this problem?
How do you know what view is available to a form?

Thanks, that was my problem originally. When using a fieldref I had to set the base context to variables.user i.e.
baseContext=':variables.user'
And in workflow I had to preface variable names with the name of the object I checked the view out into.
What I really wanted to know how to have multiple views open in a form if possible. I'd like to be able to manipulate user and role objects in the same form when editing users in a specific org.

How do I know what transactions executed by specific user for last month

Similar Messages

Maybe you are looking for