How do I know what version Itouch I have?

Hello,
I think maybe I've downloaded the incorrect software for my three year old itouch and in need of assistance.safari wont boot nor will any apps ive purchased from itunes.

Look directly on the back of your iPod Touch for one of these numbers.
iPod Touch 1st generation - A1213
iPod Touch 2nd generation - A1288
iPod Touch 3rd generation - A1318
iPod Touch 4th generation - A1367
Let us know what generation model you have and what iOS version you are running

Similar Messages

  • How do I know what version number I have.  I have looked...

    How do I know what version number I have.  I have looked at the place it says where it should be and it only says WRT54G and no version number after it.  Can I assume it is version 1.0?

    Yes. It should be 1.0. You can also check wikipedia. They list all versions including the serial number prefixes.

  • How do I know what version iPad I have?

    How do I know what version of the iPad 2 I have?

    iOS5 will give you access to more functionalities. But you will be compensating battery performance for that. iOS5 consumes more power than iOS4 for the fundamental reasons like its improved ease of usability and higher background process utilisation through notification centre, iMessage and various other features.
    If you find that reliability in terms of battery performance is key, you may want to give it a second thought on upgrading to iOS5.
    My 2 cents.

  • HT4759 How do I know what version iPad I have? For cloud

    Kneed help setting up cloud? I have ipad2 do not know version? How do I find out? Have iPhone 5 and have installed cloud but cannot figure out how to on iPad?

    Go to Settings > General > About > Version. iOS 5 or later is required for iCloud. If you have iOS 4 or earlier, you will need to connect the iPad to iTunes and update to the latest version (presently iOS 6.1.3).

  • How do you know what version Mac OSX is on ANOTHER drive?

    How do you know what version Mac OSX is on ANOTHER drive without starting that drive
    and seeing the system profiler? In fact, because the drive wont start up, Now I am wondering if it is pre-intel. ? CMD-I doesn't do it. Thanks

    Why mess with this? Well, I got the HDDs and the enclosure from my previous PPC, so I'd like to make use of it all without $pending again.
    I don't see any problems with using the card and drives on your new Mac. Hardware is too pricey to just leave behind if you can't help it. With the new drivers I suspect you'll be able to use your drives, I just don't think you'll be able to boot from them if the interface card requires drivers. They should still be very fast storage devices, and probably reliable due to the ongoing support the vendor has provided.
    I went through the same type of issue when I bought my Dual G4 1.42 Tower (upgraded from a Quadra 840AV ). Several of my devices were SCSI (I was into SCSI Wide/Fast drive arrays at the time for video capture), and I was able to use an Adaptec card for scanning for several years with Jaguar and Panther. I'd spent quite a bit of cash to ensure high quality and performance and didn't want to loose all of the investment. Eventually the SATA hard drives and other USB and Firewire replacements became so cheap and performance improved enough that loosing SCSI with Tiger was not a big deal. I do think I should get about 5 years of hardware compatibility with most products and I keep older Mac's around for dedicated services as long as they aren't a costly maintenance issue.

  • How do i know what version of the Firmware Upgrade 1.01

    Op
    ps.
    What i was trying to say is how do i know what version of the firmware does my player have installed on it,
    I have a 28mb MuVo V200 and i was thinking of downloading the Firmware Upgrade .0.03 but i do not know if my player already has iMessage Edited by The_D_AUS on 05-0-2005 07:45 PM

    Just access the player Menu and then scroll to the option 'Setting'->'Information'.
    Jason

  • HT4759 How do I know what version I'm running on my iPad?

    How do I know what version is running on my iPad?

    Rose May wrote:
    Can it be upgraded?
    You have not supplied any Information...
    But See Here... How to update your iPhone, iPad, or iPod touch

  • How do you know what version of OS X you have on your Mac Mini?

    How do you know what version of OS X you have on your Mac Mini?

    Apple Menu (upper left on meu bar) > About This Mac
    "Verion: " 10.8.x is Mountain Lion, 10.7.x is Lion, 10.9.x is Mavericks, 10.6 x is Snow Leopard.

  • How do I know what version of iTunes I have?

    Trying to download music from windows laptop...says my iPad iTunes needs to be version 11.1 or higher...how do I download latest version and how do I know what version I have?

    To find out what version you have, click on Help > About iTunes.
    To get the latest version, go to http://www.apple.com/itunes/download/

  • How do I know what version my iphone is?

    How do I know what version my iphone is?

    If your iPhone is using to most up to date software:
    Does your iPhone have a wallpaper?
    If no, that it's an iPhone 3G (Black background)
    If yes, does your iPhone have an inner camera?
    If no then it's an iPhone 3GS.
    If yes it's an iPhone 4.
    Or
    Settings App>General>About (This only works on iOS 3 and iOS 4, it doesnt seam to work on iOS 5)

  • HT5219 How do I know what version of Thunderbolt firmware I have running?

    How do I know what version of firmware my Thunderbolt display has?

    You can get the actual version of your Display firmware by accessing the Thunderbolt hardware section as LL describes:
    I'm fairly certain that 22.2 if the latest firmware version for the Display.
    Clinton

  • HT1338 I am new to mac,always had windows knowledge. how do I know what version I have in safari and what to upgrade to?

    I am new to mac and have an older ibook g4...mac os x version 10.4.11 processor 1.42 ghzz powerpc g4....to be exact/How do I know what version of safari I am using and what to upgrade to- if I believe I have {panther}? Im Lost anybody please?

    Take a look at TenFourFox.
    TenFourFox likes lots of memory. Max out your machine.
    tenfourfox -- It's a port of the latest FireFox to run on older hardware and software.
    "World's most advanced web browser. Finely tuned for the Power PC."
    http://www.floodgap.com/software/tenfourfox/
    alternative download site:
    http://www.macupdate.com/app/mac/37761/tenfourfox
    OmniWeb uses the lastest Safari framework.  The open source WebKit. Other browsers like Safari and iCab use the OS version of WebKit.  The OmniWeb downloaded dmg includes it's own copy of the latest WebKit.
    http://www.omnigroup.com/products/omniweb/
    Safari 4.1.3 for Tiger
    http://support.apple.com/kb/DL1069
    iCab - The Taxi for the Internet
    http://www.icab.de/
    Look at what is happenning with your Mac when you run Activity Monitor.
    Macintosh-HD -> Applications -> Utilities -> Activity Monitor
    Click on System Memory to get statistics on memory usage.  You should have some free memory.
    When you have lots of page outs more memory will be helpful.  My entry for entry for Page ins/outs is:
    Page ins/outs: 29163/0
    Notice I have 0 pageouts which says that I am not using my harddrive for extra memory space.  Thus, I have enough memory.
    Activity Monitor has a neat feature where it can display a dynamic dock icon.  In Activity Monitor View > Dock icon > Show cpu history.
    "Reading system memory usage in Activity Monitor :"
    http://docs.info.apple.com/article.html?artnum=107918
    http://developer.apple.com/documentation/Performance/Conceptual/ManagingMemory/A rticles/AboutMemory.html#//apple_ref/doc/uid/20001880
    See   Kappy
    http://discussions.apple.com/message.jspa?messageID=8025223#8025223
    Problems from insufficient RAM and free hard disk space
    http://thexlab.com/faqs/lackofram.html

  • TS1707 how do i know what version of itunes i have?

    how do i know what version of itunes i have?

    Help > About iTunes.  This will bring up a window with a scrolling display of your iTunes version and other information.
    If you don't see a Help menu, first use CTRL+B to enable the menu bar.

  • How do I know what version?

    How do I know what version of Airport I'm using?

    If you are asking what version of AirPort Extreme that you have....
    Open AirPort Utility - Click Manual Setup
    Click on the AirPort Extreme on the left and info regarding what generation of product you have and what version of firmware is currently installed will appear to the right
    If you are asking what version of AirPort Utility that you have......
    When you have AirPort Utility open, click the AirPort Utility menu in the upper left hand corner of the the screen and then click About AirPort Utility

  • Dumb question but How do you know what generation iPad you have?

    Dumb question but how do you know what generation iPad you have?  I got mine as a gift on Xmas day 2012 but don't know how to find out what version/generation it is.  Can someone help me find that info?  I have looked within settings & elsewhere and I cannot find it.  Thanks in advance!

    Append the last three characters of its serial number to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
    (83797)

Maybe you are looking for

  • Hp printer update on aug 8th broke my printing capability

    I have a MacPro running Lion... all latest updates. The HP Printer Drivers release on 8/8/2012 has now made it impossible for print anything.  I have an HP Color LaserJet CM1312nfi MFP.... which is connected via Ethernet. Anything I attempt to print

  • CR for VS 2005 - Bar Chart - Bar colors

    Hi, I'm creating a report in Visual Studio 2005 and have a bar chart in it.  I've searched the forums but can't seem to find out how to change the colors of the Series bars. If anybody has any ideas or suggestions, they would be greatly appreciated.

  • Is SATA/600 good for MBP 13" i5 ?

    hey fellas, i plan on upgrading the HD that came with my new MBP 13 i5 and was wondering if a WD SATA/600 will be supported ? the plan is to upgrade to one of the following WD's WD1003FBYX WD10EALX please let me know if the second SATA/600 will work

  • Setting output aspect ratio

    I have a jpeg background with 1080p video scaled down to 16.2%  overlayed over it. It also has a powerpoint (jpeg) overlayed on it.  The final product is an instructor to the right of the powerpoint discussing his presentation. Everything is square p

  • BOBJ 4.0 Client Tools Configuration Help

    i have 32 and 64 bit System DSN setup on the server using the 2005 drivers. 4.0 was installed with 2008 Express. i'm not sure if that has anything to do with it? dumb question, should it be set to the db or cms db? i don't remember configuration bein