How do i know when i'm using wifi vs mobile data usage?

if for example I am surfing the internet. wifi is free vs. using mobile data

Upper part of your phone will either say 3g or it will show the wifi symbol

Similar Messages

I purchased the teacher and student lightroom 5. I put in my code and uploaded my evidence to show that I am a teacher. I am guessing it was sent through to someone. How do I know when I can use the software? I don't understand what to do next.

I purchased the teacher and student lightroom 5. I put in my code and uploaded my evidence to show that I am a teacher. I am guessing it was sent through to someone. How do I know when I can use the software? I don't understand what to do next.

Please refer below link for more information
Education FAQ

Verizon iPad 3 gen: How do I know when I am using 4G or WiFi?

I purchased the pre-paid Verizon data plan for my new iPad WiFi/4G. When the cellular LTE service and WiFi are enabled, the iPad shows Verizon LTE and the WiFi signal. How do I know which one is being used? Does the iPad default to WiFi when it is enabled? Do I need to turn off cellular data service when I am on a WiFi to avoid being charged for cellular data?

I was in an area where the iPad is set to recognize the wifi network and log into it automatically, which is does (at least when cellular data is turned off). I didn't realize cellular data was turned on, so I didn't check, but as soon as it told me that it had used up all of the cellular data, I checked and it had indeed automatically connected to the wifi network like it was supposed to do. The problem is that the iPad is prioritizing cellular data ahead of recognized and available wifi networks. I haven't found anything in any of the forums discussing how to change that, and there appears to be no way to determine which is being used without constantly checking your cellular usage (looking to see how much of your plan has been used and how much is left). That data is not updated in real time and could take up to 72 hours to post, so even that doesn't tell you that the iPad is using cellular at any given moment instead of wifi. Consequently, it's worth warning other unsuspecting iPad users that they need to turn cellular data off when not in use unless and until they determine that their iPads are not experiencing what at least several hundred of us are experiencing now.

How do you know when you are using the internet?

If I am using an app that requries internet, and I press the middle button to get out of it am I still using part of my data plan?

While you are using the app if you are not on WiFi you are using the internet. If the app is one of the few that can run in the background you need to close it to stop it from using your data plan. Double click the home (middle) button, hold down your finger on the app, when you see a red circle with a dashed white line next to the app icon tap it, press the home button.

How do I know if I'm using wifi or data?

It shows the wifi symbol saying that im using wifi i assume but then sometimes it shows the lil spinny thing beside the wifi symbol so idk if im using wifi or data?

Like you said, it will show the wedge-type shape when you are using wi-fi.
However if you are using cellular data, "3G" will appear right where the wi-fi symbol is.

I am using a WD external hard drive for backing up my laptop with Time Machine, but I have to do it manually. How do I know when it has finished the back up? How long should it take?

I am using an external WD hard drive for backing up my laptop. I have to do it manually, so I can't set Time Machine to just do it for me. How do I know when it is done backing up? How long should this take?

Triple-click anywhere in the line below to select it:
tmutil compare -E
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

I have my credit card on my daughter's i pod and i needed it to set up the apple id how do i make it so she can't spend any of the money but still get free apps.? Also she has a$15 app card on there how do I know when she buys apps which payment it takes?

I put my credit card on my daughters new i pod. How do I block her from buying apps but still being able to download free apps? Also she has a $15 app card on the i pod how do i know when she buys something whitch payment it will take the visa or app card? PLEASE HELP A.S.A.P. THANK YOU

You can
Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
You can have apps purchased from more than one account. It does complicate update apps though.
- Go to settings>Store and sign out and sign into your account.
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

How do I know when my backup is complete to my external hard drive

How do I know when my back up is complete to an external har drive...new user

Welcome to Apple Support Communities.
If you are using Time Machine, open , System Preferences, System, Time Machine.
It will show the status of the backup drive, including the date of the first backup, as well as the most recent.
Checkmarking the 'Show Time Machine status in the menu bar' will allow you to view the latest Time Machine backup by clicking on the icon in the menu bar, without going through System Preferences each time.
Clicking Open Time Machine Preferences... from the menubar takes you to the same Preference screen as shown above.
The first backup will take a while, up to several hours or more, because it is a complete backup of everything on your system.

How do I know when my unlock has been processed?

Hi all,
Sorry for what's probably a dumb question, but I can't find an answer anywhere.
I have an AT&T iPhone 4S, and I recently called them to request an unlock. Since it was on a business account while under contract, they had to submit a request directly to Apple instead of just using the web form. However, they told me that they never received anything from Apple during the process that would indicate that I'll be notified once the request has been approved. So from my understanding, completing the process on my end involves tethering to iTunes and restoring the phone - but how will I know when it's actually time for me to do that?
I should add: I am no longer with AT&T, or in touch with anyone else who is still on the account that I had been part of. So if anyone else on that old account gets notified, I won't know. And since I'm not with AT&T myself, I feel doubtful that they'd let me know.
Thanks for your help!

Apple does Not Unlock phones... This is done by the Carrier.
About Unlocking...
http://support.apple.com/kb/HT5014
Also See this AT&T Unlock Eligibility

How do i know if my query using SORT_AREA_SIZE   or temporary tablespace ?

Good Morning Everyone !
My DB version is 10.2.0.1
I have large table exactly 3 million records.
SQL> select count(*) from tab1;
COUNT(*)
   300000
SQL> select * from tab1 order by no DESC;
sorting ... in process
300000 rows selected.
in Terminal 2 : I tried to find sorting details -   ( No rows selected - why ? )
SQL> select USERNAME , USER , TABLESPACE , SQL_ID from v$tempseg_usage ;
no rows selected
SQL> /
no rows selected
When i google i have seen this ;
If Oracle cannot do the sort in memory (SORT_AREA_SIZE initialisation parameter), space will be allocated in a temporary tablespace for doing the sort operation.
REF_LINK : TEMPORARY Tablespaces and TEMPFILES | Oracle FAQ
MY DOUBT QUESTION :   How do i know if my query using SORT_AREA_SIZE or temporary tablespace ?
Thanks in advance.

@ JohnWatson
I have seen some articles from ORA - FAQ. Good.
SQL> select USERNAME , USER , TABLESPACE , SQL_ID from v$tempseg_usage;
USERNAME                       USER   TABLESPACE                      SQL_ID
   SCOTT                               SYS          TEMP                            fh9vqgyd6m0d1
PGA management means that sorting only 300000 rows may well occur in memory
            Is this (3 million rows) - standard value for 10g version ?
Thanks JohnWatson

How do you know when your MacBook is infected?

Hey All. Well my question is how do you know when your MacBook is infected with a virus? I came off windows and i have norton antivirus so i have something to tell me there. But on the Mac OS you rarely get viruses and i dont have a anitvirus program, so how do you know when you have one? And what does it do?
Thanks!

Since no ones got one that I know of it is hard to say. I figure that when the day comes that someone writes a Mac virus you will know real quick what happens. If your concerned you could use ClamXav. I use it if I download something for my wife's PC but have never found anything yet.

How do you know what classes to use ?

Hello,
This may sound daft - but how do you know what classes to use to do a particular task ? For example to do password-related stuff - how would I know which classes are all relevant to that ? Am I supposed to buy a book on the classes as the API documentation doesn't really tell you WHEN to use which classes.

If you're using JSP, then your password field is likely going to be implemented in HTML. So that's nothing to do with Java. (And you can't use a JPassword field in a JSP page.) But when that field comes back to your server, you may be using Java to authenticate it. Even there, the question is not yet what Java method you are going to use, but what methodology. You could have a database to authenticate against, or an LDAP directory. Or you could have the web server use its built-in authentication, which means you don't have to do any Java coding at all. And there are other ways.
So the question before yours is, how do you know what methodology to use? Again, that comes down to experience.

How do we know when datafile was added to a tablespace

HI experts,
I wanted to know how do we know when datafile was added to a tablespace.
Actually i need to monitor how much space was used for a month for a tablespace
thanks in advance

Which could be turned into an external table and queried at will:
Demo of the alert log as a table at:
http://www.psoug.org/reference/externaltab.html
Just a quick note with respect to background_dump_dest for anyone starting into 11g. It is deprecated and BDUMP and UDUMP no longer exist: Read the docs.

How can I know when I reached space limitations

Hi, I want to know what happens when an enviorment reachs its space limitation.
I know that space available is 30mb per user and the only way to know how much space you've consumed is by calculations about the number of registers.
But I'd like to know how can I know when I reached that limit and what is the procediment to buy more space (overall how much time it takes).
Every comment will be appreciated.
Thank you.
Edited by: linkln on 13/08/2010 10:29 AM

We recently instituted a new CRM On Demand storage policy and we realize it hasn’t been disseminated as broadly as it should be. This new policy is significantly more generous than the former policy at no additional charge. We used to offer 30MB pooled storage for Multi-tenant, 45MB for Single-Tenant Standard Edition, and 60MB for Single-Tenant Enterprise Edition (this space covered standard records and attachments).
Customers often think in terms of records and not MB, especially when they are considering importing x million contacts or other records. An average record uses 2KB. We have made the following changes:
1)     Multi-tenant. Converted the 30MB to 15,000 records. Added 100MB per user for attachments;
2)     Single-Tenant Standard edition. Converted the 45MB to 22,500 records. Added 150MB per user for attachments;
3)     Single-Tenant Enterprise edition. More than doubled the 60MB to 70,000 records. Added 200MB per user for attachments;
In summary the new limits are:
Storage Allotment by CRM OD Offering______     Records per User_____Megabytes for Attachments to Records per User
Multi-Tenant___________________________15,000 ____________100
Single-Tenant Standard Edition_____________22,500 ____________150
Single-Tenant Enterprise Edition____________70,000 ____________200
A couple of additional notes:
•     When counting records we are only counting primary data records. Meta-data and configuration records don’t count against the limit.
•     Usage is pooled as before (i.e. a customer receives the amount of storage per subscriber as listed above multiplied by number of subscribers).
Edited by: bobb on Aug 13, 2010 10:57 AM
Edited by: bobb on Aug 13, 2010 11:03 AM

How can I know the database is using Cost Based or Rule Based?

Hi all expertise,
How can I know the database is using Cost Based or Rule Based?
If cost based it is using, what methods are need to use to minimize the cost when database is running? And which tables I can see the performance of the database?
Thanks
Amy

how to see database setting ?
use this
SQL> sho parameter optimizer
NAME TYPE VALUE
optimizer_dynamic_sampling integer 1
optimizer_features_enable string 9.2.0
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_max_permutations integer 2000
optimizer_mode string CHOOSE
choose means if table statistics is available then it will use cost
else
use rule based optimizer
for seeing performnace of table use
set autotrace on
and run your query
if it doen't show cost.it means it use rule based
for using cost based
u will calculate table statistics
9i
dbms_stats.gather_table_stats('owner','table');
8i
analyze table <table_name> compute statistics;
hope it will help you
kuljeet pal singh

How do i know when i'm using wifi vs mobile data usage?

Similar Messages

Maybe you are looking for