How do I know when the battery is fully charged?
I use my computer to charge it, but there's never any indication that it's fully charged, so whenever I take it off, it's just a guess, and I'd like to get the maximum battery life possibly out of a charge. Any way to tell?
Don't rely on the icon to indicate battery issues. It is trying to predict how long your iPod will run under the current operating conditions (as I understand things), so it is not so much of a gas gauge as a range indicator.
If the indicator is not all the way up to the tippy top, I wouldn't sweat it. Keep track of how long your iPod plays - that's the real indicator of battery condition.
Similar Messages
-
How do I know when my battery is fully charged?
When I plug in my Nano I get the do not disconnect screen, and the little battery icon in the upper right corner is green with a plug in it.
At one time I remember seeing a big icon that was fully charged, but I don't remember how that came to be.
How do I know when my battery is fully charged?
Thanks,
Mattit's fully charged when the green battery sign has a little plug sign in it
-
How can i know when my battery is fully charged ios 7.0.2
in ios 6, it appears an outlet icon when the phone is fully charged but i cant see that in ios7, it only has a thunderbolt icon. so i dont know when my phone is fully charged. someone helps me?
yeah, i know that. but you know, in ios6, it's not fully charged when it reaches 100%. i have to wait like 15mins when the outlet icon replaces the thunderbolt to know my phone is fully charged. but in ios7, it doesn't have an outlet icon so i dont know if my battery is full.
-
How can you tell when the battery is fully charged?
when done syncing, i have a totally green large battery icon- but thats what i always have- any other indication- or am i misreading the large green battery as an indicator to charge completness?
the little white battery icon never seems to change when using touch 2g?
what am i missing please
thank you very much
bob donchezThe small battery symbol has a lightning bolt symbol when the battery is charging and a electrical plug symbol when it is completely charged.
There are pictures in the users guide, page 27: http://manuals.info.apple.com/enUS/iPod_touch_2.1_UserGuide.pdf -
How do know that the battery is fully charged on ios 7
How do know that the battery is fully charged on ios 7
When you turn it on from sleep mode, below the time on the lock screen it says how much charged it is.
-
My iPhone has started buzzing or beeping for unknown reasons. It seems to happen when the battery is fully charged as well.
you cannot overcharge the iPhone battery. You can leave it plugged in with a full charge for as long as you want. It will not affect the battery at all.
-
Does the battery charging in the macbook pro retina automatically cut off when the battery is fully charged? or does it continue charging?In which case,is it better for the battery life to switch off the power supply or leave it on while using the macbook?
Yes, and the pilot light on the MagSafe2 connector changes from orange to green. If you unplug, you will start draining the battery again, whereas if plugged the Mac will take power from the brick and leave the battery in a charged state.
-
Should I disconnect my iphone lighting connector when the battery is fully charged? or i can connected always?is there any issue using iphone powered in?
It can stay connected fully charged without any problems.
No issue using the iPhone while charging. -
Nokia 2610-How do I know if the battery is fully c...
Just got a Nokia 2610 phone.
Plugged the charger in, and it's charging, but how do I know if it's fully charged?
The battery symbol is still empty, but there are lines going up/down the screen (like a battery/or reception symbol)
Is there any indication that the phone is fully charged with the 2610? Or how long should I charge it for..etc.
Anyone info, or insight would be great, Thanks!See:
http://support.apple.com/kb/HT1476 -
Light around adapter is red when the battery is fully charged
The subject basically says it all. My battery is fully charged, it has been for a while, but the ring is red. Under the battery icon in the upper right is says calculating until full, but it also says 100%, clearly something is wrong. Any suggestions.
Thanks,
AaronThis sometimes happens when the actually battery status and what your PowerBook thinks you battery stus is gets a little out of sync. This is normal so don't worry too much about it. As long as you calibrate on a regular basis you'll be fine.
-
Dumb Question...How do I tell when my battery is fully charged?
I just got it this morning. I turned it off and plugged it in to charge the battery. There's a red dot in the upper left-hand corner. Does this maybe turn green when it's fully charged?
You're welcome. If you haven't already, you also may want to take a look at the info. at this link:
Samsung Galaxy S4 16GB Black Mist Support | Verizon Wireless
and also download the full owner's manual (available at that link under the Get to Know Your Device section; click the Device Manual link). -
Dear Freinds,
What do you think better for maintaing the battery performance?
keeping it charging all the time or unpluge the charger when it become fully charged, decharge it and then charge it again?"Apple recommends charging and discharging its battery at least once per month."
From here > Apple - Batteries - Notebooks -
please help me!
i using ipad2
- ios 6.0.1
itunes 11.0.1
after spending a few percent battery ipad freezes then it shows a black screen and then itunes conect.
i must always restor and update ipad.
i reset ipad in many ways.
i regularly closing applications.
my ipad has never been jailbreak.
thanksFrozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
How do I know the battery is fully charged?
Hi ,
Can anyone help me on How to know Lumia 710 battery is fully charged?
Solved!
Go to Solution.The battery icon will stop flashing when fully charged.
Microsoft Windows Phone MVP
Follow me on Twitter: @ThisIsMetro
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you! -
my ipod has the green lights however when i try to listen to music ....nothing ....i tried several head sets. how do i know when the ipod is finally dead
Read the manual for a solution - iPod Manuals
Maybe you are looking for
-
Can I use a wifi hard drive/backup drive to access movies and music?
If I use a wifi had like the seagatfe wireless plus, can I access iTunes music and movies through this without a computer open and running iTunes?
-
Won't keep themes, won't display comments in newspapers or allow making comments in newspapers
My theme is gone. Page has white and yellow background with blue lettering. Re-installing the theme doesn't help, Also, when I'm reading newspapers; cannot make comments on articles, sometimes will not even show that there are comments on article I'm
-
Hi All, We are getting an null pointer exception in moni randomly.This error occurs at CallAdapter step. Complete error is: com.sap.engine.interfaces.messaging.api.exception.MessagingException:Could not insert message ***********(INBOUND) into databa
-
Signature on multistep approval process
Hi, We currently have a business process which has two step approvals. The requestor submits the hard copy of form to Approver 1, Approver 1 signs the forms and passes on to Approver 2 . The process is completed when Approver 2 signs the form. We
-
LNK2091 error for OCIObjectGetAttr and OCIObjectSetAttr
Hello all, I have a small Windows x64 Console program statically linked to oci.lib (12.1.0.1.0) which was working well so far until I tried to use the APIs OCIObjectGetAttr/OCIObjectSetAttr. Now my program gives the following Linker errors: Error 19