How do I know which G4 I have?

Hi,
Trying to look at prices for adding RAM to my powermac G4 and I have no clue as to what I've got. My work got it for me, and it came with no paperwork or booklets. What I can tell is that it's an 800Mhz processor. Mirrored circular front. Some other modifications that my work made before I got it (added zip drive) so the picture of what I've got is not at all like any pics anywhere on macs. Can someone please direct me to a site that will let me know what Mac I've got so I can add more memory?

Does it look like any of these?
http://www.everymac.com/images/cpupictures/apple_powermacg4.jpg
http://www.everymac.com/images/cpupictures/apple_powermac_g4qs.jpg
http://www.everymac.com/images/cpupictures/apple_powermac_g4mdd.jpg
That said there were only two models made with 800Mhz G4s: Power Macintosh G4/800 Dual CPU Quick Silver, and the Single CPU 800Mhz Quick Silver. It could be an upgraded older model though.

Similar Messages

  • TS1369 how do i know which ipod i have

    How do you tell what ipod i have?

    This document shows all of the iPod models
    http://support.apple.com/kb/HT1353
    This web site also has a list, with detailed "profile" pages
    http://www.everymac.com/systems/apple/ipod/index-ipod-specs.html

  • How do I know which add-ons have been validated as safe? When clicking "Add to Firefox" I get the scary warning window about only using add-ons from trusted

    The scary warning that appears when I click "Add to Firefox" for a certain add-on discourages me from actually installing it.
    "Install add-ons only from authors whom you trust. Malicious software can damage your computer or violate your privacy . . . (author not verified)"
    In particular, I'm interested in the Password Exporter add-on. I want to be especially cautious as this will access all my passwords stored in Firefox. How do I actually know if an add-on is safe or not?

    If you are talking about "Password Exporter 1.2.1", it's safe as I have been using that add-on for years and love it.

  • Firmware how do I know which one I have

    I have a G3 333 and it has OS 9.2.2 on it . I was thinking about installing OS X on it but I know you have to have the firmware up to date . How do I check to see wich version I have . Thanks.

    It depends on when Apple refurbished the iMac. It's
    possible that it has been sealed up in the box for a
    while. Unless there's a shipping label attached to
    the box, you don't know whether "Computer Geeks"
    purchased it directly from Apple or from another
    source (wholesale, liquidation, auction, etc.).
    The label on the brown box the iMac was sent in was labeled 08/01/06.
    The serial number that it was reassigned was YM13003WLGQ. Is this the kind of serial number Apple gives a refurbished computer? There was no Apple part number on the label but a new Computer Geeks SKU of IM500-BLU-B.
    If
    they acquired it through one of the latter sources,
    that could explain the iMac's "dated" firmware.
    My gut says this is either something given a lick and a promise by Computer Geeks (they ran the Apple hardware tests and it checked out as Kosher) and then sold as "refurbished" or something that was bought from a school and then represented as "refurbished" but actually better referred to as "used."
    Although it may seem intimidating with the warnings
    about interrupting the procedure, as long as you
    follow the instructions, you'll be fine. After
    you've done two or more hardware flash updates,
    you'll realize that holding your breath isn't a
    required step in the process.
    Yeah, but the problem is if it does get "bricked" I can't replace it. There were only 3 left of this model when it was bought and now none left. It looks like I will visit the friendly folks at the Genius Bar for this one. Not gonna take the chance.

  • At Mozilla's suggestion I reverted to an earlier version of Firefox but it still shows 3.6.12 how do I know which verison I have?

    I have filled out crash reports, I have scanned all the questions, I have answered emails from Mozilla, I have deleted almost every Add On--many of which I liked...but only yesterday did I see a notice advising if I was still having problems to revert to an earlier verison of Firefox. The listing only gave me one option--compatible with Windows XP Service Pack II (I am running Windows 7, Home Premium 32 bit). I chose that option and other than having to "Allow Firefox to make changes to this computer" box appearing each time I launch, nothing seems different. I checked under Troubleshooting and the screen form reads I am running 3.6.12 !! (my nemesis).
    So what version am I running? Is it still 3.6.12 but set for compatibility with Service Pack II for XP? That doesn't make sense. But Sync won't work still, the same sites show only text, et. etc.I dislike the the format of IE8, but it doesn't crash and it shows all my sites correctly. Is it better to just use that? I was about to download Firefox to my Android, but I think I'll stay with Google

    To check your installed version, open FF, go to "Help" and click on "About Mozilla Firefox." The panel that is displayed will show your version.
    If it shows 3.6.12, instructions for going back to an older version can be found at
    [[kb.mozillazine.org/Go_back_to_an_old_version_of_Firefox#Older_version]]
    It will also give you links to two ftp sites with many older versions listed.
    davewdan

  • How should I know which JAVA

    Hello
    How should I know which JAVA I have installed on: when Issue-ing command "java -version".
    I get response like :
    java version "1.4.2"
    Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
    IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 Linux amd64-64 j9vmxa64142-20080923 (JIT enabled)
    J9VM - 20080922_23329_LHdSMr
    JIT  - 20080815_1845_r8
    GC   - 200809_04)
    I know it comes from files like  "IBMJava2-AMD64-142-SDK-1.4.2-12.0.x86_64.rpm" or " IBMJava2-AMD64-142-SDK-1.4.2-13.2.x86_64.rpm"
    But how to find out. It is an productive system so I can not "try"
    Thank you in advance

    Hello
    In any case java is instaled to /opt/IBMJava2-amd64-142 (this is an unix machine). This is also JAVA_HOME and SAPINST.... variable
    This is when I install from  "IBMJava2-AMD64-142-SDK-1.4.2-12.0.x86_64.rpm" or from "IBMJava2-AMD64-142-SDK-1.4.2-13.2.x86_64.rpm". When I enter java -version I get (as stated before):
    java version "1.4.2"
    Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
    IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 Linux amd64-64 j9vmxa64142ifx-20090909 (JIT enabled)
    J9VM - 20090908_41946_LHdSMr
    JIT  - 20090210_1447ifx1_r8
    GC   - 200902_24)
    How could I know it comes from "IBMJava2-AMD64-142-SDK-1.4.2-13.2.x86_64.rpm"(version 13 i.e latest) or "IBMJava2-AMD64-142-SDK-1.4.2-12.0.x86_64.rpm"
    Kindly please for help

  • HT1451 If I have two iTunes libraries on one computer, how do I know which one is opening when I click on the iTunes icon on the desktop?

    If I have two or more iTunes Libraries on one computer, how do I know which one is opening when I click on the iTunes icon on my desktop?

    You cannot.
    When you sync to a new library, it will erase the current content.
    Use your backup copy of the old computer to copy everything to the new one.

  • How can I know which model of K9A2VM I have?

    I have a K9A2VM motherboard with an Athlon 64 x2 3600+ AM2 CPU. I would now like to upgrade to an AM3 Phenom II CPU with lots and lots of cores.
    However, I have a problem. I don't know if I have K9A2VM-FD or K9A2VM-FIH and I don't know how to find out. I've opened my box and looked at the card, but it only says K9A2VM. By reading the specs and looking at pictures, I know it has to be one of them, or at least that it is not K9A2VM-F V2 since it only has two RAM slots and I have four of them installed. There are other obvious differences too, which I can easily spot by looking at the picture.
    Now, looking at the CPU support page for -FD and -FIH, they seem to have differences in what CPUs they support:
    -FD at least supports an X6: http://www.msi.com/product/mb/K9A2VM-FD.html#/?div=CPUSupport
    Phenom II X6    Thuban    HDT90ZFBK6DGR    1090T    200    3.20    3M    6M    E0    125    7501v1B.zip
    But the -FIH CPU support page is different: http://www.msi.com/product/mb/K9A2VM-FIH.html#/?div=CPUSupport
    If I can use that processor, I'm really happy. But -FIH doesn't seem to support Phenom II at all. So provided that the information in the CPU support page is correct, it's fairly important to me to know which model I have. But in case nobody knows how I can distinguish between them; if I buy a Phenom II X6 CPU and it turns out that my motherboard doesn't support it; what is the worst thing that can happen? Will I break the CPU or motherboard, or will it simply not work, but the hardware will still be fine?
    Thanks.

    So this is a MS-7501 Version 1.0 card, in addition to being a K9A2VM. The entire web refers to it as "K9A2VM-FD / FHI". One will work, and the other will go up in smoke. And there is no easy way to know which is which. So how can I know? The reason I bought this card was so I could upgrade the CPU at a later time. Now it seems that's not possible, because the available information is so very poor. I've never had to gamble when purchasing hardware from other vendors. Is this common for MSI?

  • Can you have multiple Apple TV's in the same house and network? If so how do you know which one to pick from your Idevice?

    can you have multiple Apple TV's in the same house and network? If so how do you know which one to pick from your Idevice?

    Yes, there are even defaults for naming them, such as LivingRoom, Bedroom, etc, or you can even enter your own name with the remote for each AppleTV.

  • When contacts have a number in common, how do I know which is calling?

    Many of my contacts work, or live at the same place, as other contacts.   How do I know which one is calling?  My iPhone 4S (iOS 6.1) caller ID will display "John Smith and 4 others".  I thought, if I put a contact called "Smith Residence", it would display that instead of John Smith and 4 others. That didn't work.
    Then I tried linking the contacts to the "Smith Residence" listing, but that didn't work.
    Then I thought I'll delete the people and reenter them, leaving only "Smith Residence" . That didn't work.
    It doesn't seem to be the order that the contacts were entered, which decides the contact to display. It doesn't seem to be the one that others are linked to that displays. So, what is it that decides which contact displays when I get a call from a particular phone number,  if that # is common to many contacts?
    How can I choose which of my contacts will display?

    OK I think I get it.  My contacts are sorted by first name and because (alphabetically) "John Smith" is before "Smith Residence", it will always show "John Smith".  Now I have something to work with; I just need to know what alpha rules iOS uses.  Anyone???
    Word:
    *Smith residence
    1 Smith residence
    John smith
      Smith residence
    Smith residence
    -Smith residence
    Excel:
    Smith residence
    *Smith residence
    1 Smith residence
    John smith
    Smith residence
    -Smith residence

  • Hi I wonder if I live in Bangkok and like to have my own website who should I use for hosting so many of them and how do I know which one is a good one thank you

    Hi I wonder if I live in Bangkok and like to have my own website whshah old I use as hosting website? so many of them and how do I know which one is a good one thank you

    It doesn't really matter which country your hosting service is located in so long as they offer 24/7 tech support in your chosen language. Telephone support is usually free of charge to you.
    Some info about the essential features to look for...
    http://www.iwebformusicians.com/iWeb/Website-Hosting.html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • How can I know which photos are in the library was used in each album I have created before.

    How can I know which photos are in the library was used in each album I have created before?
    I have many photos in the library folder of iPhoto, but actually I don't know which photos were used in my album.
    Is there any method to find this?
    Thanks.

    Album or Book?
    If Album you can find the ones not already used:
    File -> New Smart Album
    Album -> is not -> Any
    Regards
    TD

  • My Mac Mail says that I have a plug in missing.  How do I know which plug in is missing and where do I get it?

    My Mac Mail says that I have a plug in missing.  How do I know which plug in is missing and where do I get it?

    Does this happen ONLY with Mail? Could you close all other applications and open Mail and check again? If this is still happening, please post a screenshot here.

  • I have a second generation I Pod touch.  How do I know which games I can download from the Apple Store?

    I have a second generation I Pod touch.  How do I know which games I can download from the Apple Store?

    Hello, Suzanne. 
    Thank you for visiting Apple Support Communities. 
    Unfortunately there isn't a list available at this time for applications that are specific for your iOS/Software version.  However, once you know which iOS/Software version you have installed, you can browser various applications and look for ones that meet your system requirements.  I have included a screenshot below on how to look for this information. 
    iPhone, iPad, iPod: How to find the software version
    http://support.apple.com/kb/ht2188
    Cheers,
    Jason H. 

  • How do I know which commands have been pushed to switch by PI CLI template

    We have PI version 1.3. I tried to deploy the built-in CLI template "vlan" just to create a vlan. I run the template and input vlan ID and name. The job is shown as successful in PI but the vlan is not created on the switch. In the transcript part of the job history, it only shows "configlet:response: config t". Please see the attachment for the screen shot. How do I know which commands have been pushed to the switch by the CLI template? How does PI push the CLI template to the switch? via snmp or telnet? I tried to run "debug tacacs authentication" and "debug tacacs accounting" on the switch because the switch is configured for command authentication and command accounting but I don't see any commands in the debug. It looks PI did not push any commands to the switch. Please help me to troubleshoot this.
    Thanks.

    The MPEG 2 Playback Component required by Streamclip is an optional purchase.
    http://store.apple.com/us/product/D2187Z/A
    There are other converters that can handle MPEG-2 files; try Handbrake.
    Regards.

Maybe you are looking for