How do I know which group and group counter used to create current estimate
Is there a way to know, if for a given set of materials, what groups and groups counters have been used to create the current cost estimate. Or for a given comboniation of material, group and group counter has been used to create a current cost estimate. I can look each up through displaying the cost estimate but I am looking for a quick way since the number of materials are in 100s.
I was wondering if there is a table I could look up to get the info.
Any help would be much appreciated.
Regards
The name of the table that needs to be used is KEKO. I figured it out so I thought I would share
Edited by: NIK83 on Mar 7, 2011 10:16 PM
Similar Messages
-
How will I know which Scenario is my message using?
I have a problem figuring which scenario is my message using. We have this interface which has 2 similar scenarios. The scenarios are actually the same-everything inside it-the only difference is the scenario name. How would I know which scenario is the message using? I tried looking into the trace but I cannot find it there.
Mary,
As replied in the above posts, U can not create two sender comm channel or receiver determination for same interface from same source. As told, ur objects might have been copied to two scenrios which you have also confirmed.
Scenario name can be treated just as a container to hold the objects logically which belong to one process. It doesnt have any role in the execution of ur process.
You can try to change ur objects in any one scenario & same will be replicatd in other scenario also. So if I m nt wrong, I will conclude that scenario name is jst to combine the objects & doest have ny role in execution of process in XI.
Regards
Sushil -
How to find out which site and list is using InfoPath form
Hi,
We have a site collection with 100+ sites. We are doing analysis of these sites for SP-2013 upgrade, I would like to know which site lists are using a InfoPath form, how do I find out this without manually going through all the
sites & lists.
Thanks,
PatHi
You can Use sharepoint Manager to do so.or use below link
http://blogs.msdn.com/b/david/archive/2011/08/25/powershell-script-to-locate-content-type-useage.aspx
http://aarebrot.net/blog/2011/02/using-powershell-to-retrieve-content-types-and-associated-fields/
As info path form deploy as content type you can find usage of content type
Regards, Rajendra Singh
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful http://sharepointundefind.wordpress.com/ -
Group and group counter used to create cost estimate
I am creating a custom report and would like to know what table do I have to use if for a given material the program has to pick Group, Group counter and the task list type that were used in creating the cost estimate for that material. Any help in this regards is much appreciated.
Regards,The name of the table that needs to be used is KEKO. I figured it out so I thought I would share
Edited by: NIK83 on Mar 7, 2011 10:16 PM -
Firefox has 2 default profiles, how do i know which one is actually in use?
have to reinstall firefox due to "something trying to trick firefox into updating...."
help section says to save the profile before deleting, but i have two, i could save both, but want to know if i can delete one of the profiles to leave just one on its own.This issue can be caused by the presence of leftover files in the Firefox program folder (defaults\pref) like a file firefox.js that overrides the update URL with a wrong link.<br />
Do a clean reinstall and be sure to remove the Firefox program folder.
See also:
* [/questions/826858]
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
Use this to access the current Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder -
How can I know which screen-group is?
Hi experts!!
I don't know how can I know which screen-group is associaciate to the values...for example, how can I associate this block to a screen-group for after do this? IF SCREEN-GROUP1 EQ 'DAT'.
SELECTION-SCREEN BEGIN OF BLOCK B9 WITH FRAME TITLE TEXT-017.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS: FECHA FOR P0001-BEGDA MODIF ID DAT.
SELECTION-SCREEN END OF BLOCK B9.
Thanks and regards,
RebecaHi,
Check out this code.
REPORT Z94406_TEST_123 .
TABLES: pa0001,t549a.
DATA: n(6) TYPE c.
SELECTION-SCREEN BEGIN OF BLOCK za2 WITH FRAME.
PARAMETERS:p1 RADIOBUTTON GROUP grp1 user-command a DEFAULT 'X'.
SELECT-OPTIONS: s_prd1 FOR n NO-EXTENSION modif id G1.
PARAMETERS:p2 RADIOBUTTON GROUP grp1.
SELECT-OPTIONS: s_period FOR pa0001-begda NO-EXTENSION modif id G2.
SELECTION-SCREEN END OF BLOCK za2.
AT SELECTION-SCREEN OUTPUT.
if p1 = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'G2' or screen-group1 = 'G2'.
screen-input = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
IF screen-group1 = 'G2' or screen-group1 = 'G2'.
screen-input = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
Regards,
Syed -
can you have multiple Apple TV's in the same house and network? If so how do you know which one to pick from your Idevice?
Yes, there are even defaults for naming them, such as LivingRoom, Bedroom, etc, or you can even enter your own name with the remote for each AppleTV.
-
I have an airport express extending, through wireless, a network provided by an airport extreme. How can I know which clients are connected to my network through express and which are connected through extreme?
Here you can see both routers:
I would expect to some clients connected to the express, other than the extreme. And that's all I see: only the airport extreme appears as client of the airport express.
Below, one can see the summary of the config for both routers.
Would somebody explain it?
Thanks,
Marcelo
Message was edited by: Marcelãoplease disregard this answer.
Message was edited by: Marcelão -
Why doesn't iTunes copy all my files, and how do I know which it left out?
Hello,
I had iTunes on my old PC, and when I installed it on my new one (Vista Home Premium), it very helpfully deleted everything off my iPod and copied it all back again! As it happens, the only files on the iPod were from the iTunes library, so it didn't matter, but it was annoying.
Anyway, now it has (supposedly) synched my library and iPod, if I look at the library, it shows 1164 songs. If I look at my iPod, it only shows 1157 songs.
How do I know which songs iTunes didn't copy over? More to the point, anyone any idea why it didn't just copy all of them?
Thanks for any help.OK, thanks for all the replies.
hmacross: I have checked for duplicates, and there were some there. This was because when I installed iTunes, it insisted on scanning my entire hard disk and adding every audio file it could find, even though I didn't want it to. I only wanted it to add ones in my Music folder. I had to do a fair amount of work to clean this up! Anyway, I just checked again, and there aren't any duplicates in my iTunes library.
Chris: If I look in my iTunes library, and show all the audio files as a big list, at the bottom it gives me the total number of files, and the total play length. If I look at the iPod, I see similar numbers.
After some tidying up, the iTunes library shows 1149 songs, and the iPod shows 1147 songs, so there's still a discrepancy. I have double checked for duplicates, so that's not the issue.
Thanks again. Any further help would be appreciated. -
How do it know which backup files to keep and which to delete?
How do you know which backup files to keep and which to delete?
If you still have all devices, just delete all. They will re backup.
-
I recently deleted many duplicate files. In the midst of it my Itunes songs are not in Itunes. They are in two different folders. One under 'Music' in my ID. And two under a MyMusic file in Documents. How do I know which one to import?
Thanks, this is not an ideal answer but probably the most sensible one in my case.
I will try it unless someone has a better suggestion, but I'll wait a bit as it will take me a few days anyway (I had actually tried to create a new smaller playlist or download by album, but at this stage the music app is not letting me queue a list of songs for download - I think I will have to disable and re-enable iTunes match which will probably delete all the songs).
I have to say I am not very impressed with Apple here - having an online backup of all your data and beeing able to restore it to a new device easily was a strong selling point of iCloud. For music, they are Definitly not delivering at the stage. -
Hi I wonder if I live in Bangkok and like to have my own website whshah old I use as hosting website? so many of them and how do I know which one is a good one thank you
It doesn't really matter which country your hosting service is located in so long as they offer 24/7 tech support in your chosen language. Telephone support is usually free of charge to you.
Some info about the essential features to look for...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link." -
My Mac Mail says that I have a plug in missing. How do I know which plug in is missing and where do I get it?
Does this happen ONLY with Mail? Could you close all other applications and open Mail and check again? If this is still happening, please post a screenshot here.
-
HT1338 how do I know which OS X and Mac App Store apps I'm trying to update?
how do I know which OS X and Mac App store apps I'm trying to upgrade? I have a macbook air but do not know where to look for that info...
OS X Version?
Click in the menu bar and then "Software Update".
That will take you to the App store and updates available. -
Difference between photoshop cc and photoshop cc 2014 how do i know which one I am using?
difference between photoshop cc and photoshop cc 2014 how do i know which one I am using?
Hi Petereas,
Both are different version of Photoshop application.
In Photoshop CC 2014 there are several new feature introduced than CC.
Please refer the following page on whats new in Photoshop 2014.
Photoshop Help | New features summary
When you go to Help>About Photoshop then Photoshop 2014 shows version 2014.0.0 Release.
Hope this helps.
Thanks and Regards,
Sumit Singh
Maybe you are looking for
-
ADD ATTACHMENT TO AUTO MAIL SENT DURING BIDDER CREATION
HOW TO ADD ATTACHMENT TO AUTO MAIL SENT DURING BIDDER CREATION (CREATE CONTACT PERSON) IN SRM PORTAL..
-
Cannot copy iTunes folder from Windows to Mac because of Permission
I have my iTunes library on a windows machine, running windows 7. The library is organized inside the iTunes folder. I am trying to put this same iTunes onto my new macbook pro. I tried copying the folder to an external HD and plugging that into my m
-
Access BPEL metadata tables in Olite install of SOA Suite
Hi, Iwanted to know if there is a way to acess bpel metadata tables in olite. like for esb we use system/any user/pass and oraesb sid. I am unable to do so by changing sid from oraesb to orabpel. It gives access violation error. Thanks in advance
-
Hi, I'm on LiveCycle ES 8.2. For PDF submit forms from workspace, I assigned the servername for submit as URL: http://adobe1234:8080/workspace-server/submit. We are using Document Form variable for this process. The reason is the forms will be digi
-
D7360 automatic duplex printing is not available with latest driver
d7360 automatic duplex printing is not available with latest driver This question was solved. View Solution.