How do I know which I am using when browsing the internet, Wi-fi or my carrier's network?

Thanks in advance!

By the icon on the display.
Have a look at the manual:
If you see the wi-fi icon by the signal display, then it is wi-fi.  If you see 3G or E or GPRS, then it is cellular.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Similar Messages

  • How can I know which file is using by the self-service workflow?

    Dear all:
    In my directory, there are two HRSSA.wft and How can I know which source is using by the workflow of the self-service ?
    my environment is oracle 11.5.9 | self-service 4.1 | workflow builder 2.6
    Thanks
    regards
    Terry

    One way would be to download the HRSSA workflow to a wft file (using the WFLOAD utility - see MOS Doc 578248.1), then comparing this downloaded wft file with the two files you have (using a utility such as diff in Unix). The comparison that reports no differences will identify the wft that was uploaded into the database.
    HTH
    Srini

  • HT1451 If I have two iTunes libraries on one computer, how do I know which one is opening when I click on the iTunes icon on the desktop?

    If I have two or more iTunes Libraries on one computer, how do I know which one is opening when I click on the iTunes icon on my desktop?

    You cannot.
    When you sync to a new library, it will erase the current content.
    Use your backup copy of the old computer to copy everything to the new one.

  • I have a second generation I Pod touch.  How do I know which games I can download from the Apple Store?

    I have a second generation I Pod touch.  How do I know which games I can download from the Apple Store?

    Hello, Suzanne. 
    Thank you for visiting Apple Support Communities. 
    Unfortunately there isn't a list available at this time for applications that are specific for your iOS/Software version.  However, once you know which iOS/Software version you have installed, you can browser various applications and look for ones that meet your system requirements.  I have included a screenshot below on how to look for this information. 
    iPhone, iPad, iPod: How to find the software version
    http://support.apple.com/kb/ht2188
    Cheers,
    Jason H. 

  • How does Toplink know which Pool to use ?

    We have two pools defined in sessions.xml as below
    default has is-read-connection-pool false and one with true. We are not specifying to use read pool or default pool in our app anywhere, which we can while acquireClientSession("pool name"), but we are not. Does TL automatically decide to use which pool to use ?
              <connection-pool>
                   <is-read-connection-pool>false</is-read-connection-pool>
                   <name>default</name>
                   <max-connections>10</max-connections>
                   <min-connections>10</min-connections>
              </connection-pool>
              <connection-pool>
                   <is-read-connection-pool>true</is-read-connection-pool>
                   <name>Read Pool</name>
                   <max-connections>15</max-connections>
                   <min-connections>15</min-connections>
              </connection-pool>

    When using TopLink's internal connection pooling:
    READING: session.acquireClientSession() will acquire a read connection for the client session from the default read connection pool. Having multiple read connection pools and providing the pool name in the acquire is very uncommon.
    WRITING: When a UnitOfWork requires a connection for writing it will acquire a connection from the write connection pool.
    Doug

  • Hi: I think this is a common question - I seem to have two Apple ID's and need to know which one to use when activating a replacement iphone5

    Hi:
    I have 2 Apple ID's.
    The first is the ID I established when I bought my first MacBook Pro several years ago.
    When Mobile Me ended, I migrated to a new Apple ID that is associated with icloud and that ID has its own password.
    On the first iphone 5 I purchased I used the "original ID" and noticed that I'm not receiving any email messages from my mac mail account.  I assume this is because I used the original ID and not the new icloud ID.
    Now that Apple has sent a replacement phone (issue with loose power button) I'd like to know if I'm supposed to use the iCloud ID to get the mail app to function properly....I've read this on the forums.
    Well....thought I'd test out the procedure on the old phone before activating the new phone.....it doesn't seem to work.
    I erased all content and settings, and tried to set up the device as new rather then restore from icloud.....I got an error message saying the password and User ID did not match.  I then reset my icloud password for my .me user ID.....same message came up, i.e., wrong password.
    I'd like to get this figured out as I use three email accounts and would like each of them to "work" on the phone.
    Thanks in advance for any help that you can offer.
    Michael

    jrburrows wrote:
    Ok, fair enough.  But since Job's death - Apple's control on leaks has been terrible.  I got the new iPhone, and I like it - but it hasn't made nearly as big as an impression as previous ones.  Because of the vast ammount of leaks.  With the iPad mini leaks, it's 99% sure to come out next week.
    Apple uses many manufacturers and it's massive also websites prefer to report on Apple whether true or false because it brings more hits.
    Amd by "others" I meant other people on iPads - not other devices/manufacturers.  It's possible to do so, I just want to know how.  I honestly don't think we'll ever be in a Post-PC era until all tablets allow us to use USB in the way computers do.
    No, USB is not the future, you missed the memo about cloud and wireless computing?

  • How do I designate my LAN as the one to use when opening the internet?

    I have an IMac with dual Intel processors.  When I open the internet it opens a default Network which does'nt open the internet.

    thanks for the help

  • I have more than one version of GR5 on my mac. How do I know which is being used by logic 9?

    Hi, I'm new to logic pro and would realy appreciate some help. I have several versions of guitar rig 5 on my mac. How do I find out which one is being used in logic.
    I looked in plugins and see a version that is only 109 mb but I have another that is over 500 mb on my desktop. Can I just drag and drop this into plugins folder?
    Sorry if I seem a bit stupid but I can't make out what is being used as the one called up in logic seems to be the full version.
    Thanks

    The presets from earlier versions of GR should all be in the same place anyhow.. so reinstalling GR5 into it's correct locvation shouldn't affect anything regarding those other presets. In fact, as far as I can recall.. GR5 should ask if you want to import older presets when you first run GR5 standalone (The app version of GR5 in your applications folder) after install....
    Then those same presets should be present in in the AU version of GR5....
    Also GR4 (So long as you updated it to the latest version via the Service Center) should also continue to work with Logic Pro anyhow.. and load when you load an older project which used that version....
    Finally, any version you may have installed elsewhere.. won't work with Logic Pro because LP uses the AU Component version that is installed by the NI installer and therefore located in your components folder...  Those other versions are more likely to be copies of the standalone version.. which LP9 doesn't use.

  • How do I know which Preset to use?

    I want to edit a DV film, which was is DV PAL, at 48kHz audio with 640 * 480 res. I am not sure of the fps, but it has worked before in FCE. I am not sure whether to use anamorphic or not, and what the differences are. The more I know about this stuff, the less I will need to ask you guys.
    Edit: I have since noticed the video is in a fps of 29.97, which I know FCE allows.
    Thanks in advance.
    Message was edited by: The Liberator

    That is interesting!
    I have no idea what you can do with your PAL converted to NTSC project.
    The only proper thing to do is to start again and capture the original video correctly as PAL into FCE.
    If you no longer have the tape or camera you will somehow have to play around with what you have, but as I said, I have no idea where you could start or what the quality of the final video would be like.
    As long as you have the original tape you can use any Mini-DV camcorder to capture it into FCE.
    Message was edited by: Ian R. Brown

  • How can I know which orb im using?

    Hello all
    im trying to move from javaIDL to jacORB in my application
    I point my class path to the jacORB.jar and it is first in the list
    how can I be sure im using jacORB and not javaIDL ?
    Because the declaration is the same in the code. (import org.omg.CORBA.ORB;)

    You need to set ORB properties.
    Not fammiliar with JacORB but Orbix case looks like:
    Properties props = new Properties();
    props.put("org.omg.CORBA.ORBClass", "IE.Iona.OrbixWeb.CORBA.ORB");
    props.put("org.omg.CORBA.ORBSingletonClass", "IE.Iona.OrbixWeb.CORBA.singletonORB");
    orb = ORB.init(args, props);
    Anyway, check JacORB docs.
    found this:
    p.put("org.omg.CORBA.ORBClass", "org.jacorb.orb.ORB");
    p.put("org.omg.CORBA.ORBSingletonClass", "org.jacorb.orb.ORBSingleton");
    Message was edited by:
    algr

  • How do I know which update to use for camera raw?

    I just bought a Canon 700D (T5i) and my CS5 does not recognize the RAW files. Looking at all the updates is very confusing as to just which one I need. Could someone help guide me to the correct update?

    Yes, it is very confusing.  No question about that.
    Always use the highest version that will work with your version of Photoshop.  In your case (CS5.x) that is ACR 6.7.
    It helps to remember that once a given camera model is supported in a given version of ACR, it will continue to be supported in all subsequent versions.
    In addition to support for newer cameras, each new version of Camera Raw has unannounced, unheralded bug fixes and improvements.  So just use the highest version that will work with your version of Photoshop, as stated above.  In the case of your version of Photoshop that is ACR 6.7.
    But, your camera may not be supported at all yet, and you'll have to convert your Canon raw files to raw DNG files with the free DNG Converter once said converter supports your camera.
    Message was edited by: station_two

  • How do I know which PRL to use?

    Moved for greater exposure

    That is interesting!
    I have no idea what you can do with your PAL converted to NTSC project.
    The only proper thing to do is to start again and capture the original video correctly as PAL into FCE.
    If you no longer have the tape or camera you will somehow have to play around with what you have, but as I said, I have no idea where you could start or what the quality of the final video would be like.
    As long as you have the original tape you can use any Mini-DV camcorder to capture it into FCE.
    Message was edited by: Ian R. Brown

  • HT1665 how do i know which converter to use for my iphone and ipod dock station

    i have a dock spaeker for iphone and ipod it does not support iphone 5s where do i get a converter from and which one do i get

    One of these adopters/cables should work:
    http://store.apple.com/us/product/MD824ZM/A/lightning-to-30-pin-adapter-02-m?fno de=45
    http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=45

  • Did Lion eliminate the finger gestures for show the previous page and show the next page?  I've checked system settings for the track pad and it looks like the got rid of one of my favorite finger gestures when browsing the internet.  How do I get it back

    I've upgraded to LION. It looks like LION eliminates the finger gestures within internet browsing that used to yield navigating to the previous page or navigating to the next page.  I think it was a 3 finger swipe to the left and a 3 finger swipe to the right.  It looks like this has been eliminated.  I've gone into the system preferences and went through all the new settings for the track pad finger gestures.  I've not found a combination that allows me to swipe on the track pad to do the page forward / page back function.
    How to I get this back?  I was my favorite one and now I can't get there!

    For going back to the previous page try a 2-finger gesture. Two fingers in the other direction will take you back.
    cornelius

  • How do I prevent copies of pdf docs to desktop when browsing the internet?

    This has been bugging me for a long time. I can't find any settings anywhere to disable this. Every time I view a pdf document from an internet browser window, it automatically saves a copy to my desktop. My desktop gets littered with these if I'm viewing a lot of docs. Is there a way to turn off this "feature?" Thanks in advance.

    Hi, and Welcome to the Discussions!
    One way is to use Safari>Preferences>General>Download Files to..., and set it to another Location... I make a Folder in Documents called Downloads for this.
    To completely eliminate downloading it at all, try PDF Browser Plugin...
    http://www.schubert-it.com/pluginpdf/

Maybe you are looking for