How do I layer 2 video clips in the same time space/ playing side by side at the same time

I wish to add 2 views of the same subject side by side and playing at the same time. Is this A possible and B if so how do I add the second video clip into the same time space

aggro
What version of Premiere Elements are you using and on what computer operating system is it running?
This sounds like a split screen effect to me.
If so, one view on Video 1 and the other directly above that is the other view on Video 2.
Then crop each so that each occupies 1/2 the Edit area monitor screen.
(generalized since I do not know your program version, see effects Transform/Crop).
I wrote the following in 2011 for a Premiere Elements 8 user in another forum
Your basic tools to achieve your goal are Crop Video Effect and Horizontal Flip Video Effect.
Video ONE on video track 1.
Video TWO on video track 2, directly above Video ONE.
Highlight Video ONE on video track 1, Edit Mode/Effects/Video Effects/Transform/Crop, followed by adjusting the crop under Edit Effects (see bottom of Effects Panel) so that Video ONE occupies the left half of the screen.
Do the same for Video TWO on video track 2, Edit Mode/Effects/Video Effects/Transform/Crop etc. so that Video TWO occupies the right half of the screen. BUT end with Edit Mode/Effects/Video Effects/Transform/Horizontal Flip.
Highlight the video on either side to make adjusts in the Properties Palette and appropriate Panel (position, cropping, etc). But, remember that if you make changes in the "flipped" right side of the screen, Edit Effects/Crop Panel right option will be for left and left option will be for right.
You may or may not need the "flip" part of the effect.
Please review and consider. If I have misinterpreted your question, please let me know with details and I will rethink what you seek.
Thanks.
ATR

Similar Messages

  • How do I insert a video clip into the timeline?

    Do you happen to know how I could insert a video clip into the middle of a movie like you do in FCP? Can you add tracks and insert the clip above the spot i need to change for each movie.
    I don't want to render the whole movie (convert it into a MPeg2) each time.

    No - DVD timelines are a little different to FCP. If you need to add a clip to the stream, you need to split the exisitng clip (you could trim it back to where you want to insert the new piece) and drag the new piece onto the same timeline. If you trimmed the existing piece then add another instance of it to the timeline and trim the new part from the left until you get to what you want as the out point.
    If you have a collection of video clips on your DVDSP timeline, simply dragging a new one on will shuffle the others along appropriately. However, the audio will not shuffle with them, and you'll end up moving it all manually.
    The very best thing is to create the timeline precisely as you want it in FCP and encode it to MPEG2 before bringing it in to DVDSP. Remember that DVDSP is not an editor, it is a place to assemble your work - it won't do anything remotely like FCP in that respect.

  • How do I separate short movie clips loaded from my digital camera to iPhoto 11 at the same time pics are downloaded and how do I get those video clips to a dvd that will play on a dvd player

    When loading pics to iphoto 11 from my camera, occassionaly it will include some video clips with the description of Movxxxx. I wonder if someone could direct me to some straight forward instructions as to how to transfer these video (movie) clips, which now exist in iphoto, to a dvd that will play on a dvd player as one might  expect to see a video play, including the audio that was captured at the time of filming.
    Thanks in advance for any assistance you can offer this novice.

    You need to open iMovie and it will have a event library called iPhoto Videos, click on that and the videos will load in the window next to it, then you make a new project in iMovie.  Then open iDVD and make a new project then import the movies to the program then burn to a DVD..

  • How do you put a video clip in the corner of a picture

    I have already replaced the video with the picture and detached the audio. I am trying to put the video clip in the corner of the picture.

    Yeah... I have some question for the iMovie version for MacBook Pro and the iMac on the iMovie for OS X forum. I found some of my answers here:
    https://discussions.apple.com/community/ilife/imovie?view=discussions
    This forum here I use when I have questions for iMovie for iOS, the version of iMovie that runs on iPad/iPhone.

  • How do I save my video clips/events to an external hard drive with the newest version of iMovie?

    I used to be able to drag the video clips in to my external hard drive once importing them with the older version of iMovie.  Now I'm unable to do so with the newest version.  How do I backup my video clips with the newest version of iMovie?

    Hello tronsonation,
    Thanks for using Apple Support Communities.
    If you want to be using an external hard drive to store your iMovie data, then all you need to do is move your iMovie library to the external drive.  To learn more about this, please review the information in the link below.
    Move your iMovie for Mac (2014) library - Apple Support
    Have a good one,
    Alex H.

  • How can I email a video clip I downloaded into my iPhoto library to my friends? I tried creating an email and attaching the clip but there is no sound and no picture when the 5 minute attachment "plays." How can I file= export it to them from iPhoto?

    How can I email a video clip I downloaded into my iPhoto library to my friends? I tried creating an email and attaching the clip but there is no sound and no picture when the 5 minute attachment "plays." How can I file=>export it to them from iPhoto?

    Have them install Quicktime on their PC's from Apple's website, that's the easiest fix.

  • How do I get home video clips from iMovie Mac to iMovie iPad?  Surely there is some degree of cross-compatibility?  I have a load of clips in iMovie on my MBP that I wanna download to my iPad2 so that I can edit movies on the move.  Any ideas?

    How do I get home video clips from iMovie Mac to iMovie iPad?  Surely there is some degree of cross-compatibility?  I have a load of clips in iMovie on my MBP that I wanna download to my iPad2 so that I can edit movies on the move.  Any ideas?  (The clips are in a .mov format, they have been imported / converted into this format in iMovie, original files were from a JVC camcorder in some other strange format.)

    I copied the iTunes file from the external drive and it's in both places.  I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file.  There must be something else that's missing.  My iTunes library looks the same on the new computer as it does when I open it on the external drive.  If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
    My back-up drive is a mess.  I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={  Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period.  I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive.  Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me).  As my Jewish friends would say, "Oy Vey!" 

  • How can I watch a video clip in my iPad 3?

    I just got an attached video clip from my brother, sent to my hotmail. When I open the clip, it just shows an overcrossed play bottom! How can I watch a video clip in hotmail, using an iPad? Do I need to download an app or what? Please!?

    Well on a Mac you can install
    Flash
    Silverlight
    Perian
    VLC
    Flip4Mac
    DivX
    and many other codecs/tools to watch anything.
    Guess the iOS isn't really all that it's cracked up to be, ignoring the wider world out there.
    Your only choice to complain to Apple about closed devices they make, but of course they know this already and using the iPad as a cheap "netbook" halo effect device so you get to upgrade to a Mac, just like they do with iPhones and iPods.
    In the meanwhile they are slowly closing the door on OS X, a little at a time so it's not noticeable.
    Pretty soon the excuse will be "sorry I can't play your video you sent me mom, I've got a Mac"
    https://www.apple.com/feedback/macosx.html

  • How do you add a video clip to a slide show?

    How do you add a video clip to a slide show using elements 12?

    You can import some very short video clips into Photoshop and make gifs.  I can import short (10 second or so) .mvi video clips I've taken with my point and shoot camera.
    Use File ->Import->Video Frames to Layers
    CS3 doesn't recognize .mvi files until you enter *.* in the box, hit load, then find the file you want.
    After the file has been loaded, go to Windows, and check Animation.
    After the Animation bar loads, go to the right side arrow, check Make Frames from Layers.
    Then Save for Web and Devices, and you've got your gif.
    I find it much easier to use the separate software.

  • How do you add additional video clips to a multicamera sequence after aligning multiple cameras?

    We shoot extended videos (1-2 hours in length)  all the training videos I've seen for CC walk you though aligning the inital cuts and then editing, but they don't say how to add the rest of the clips from that session to each video track.  Any tips?

    Thanks Mark - That worked.  By the way, in case there are any other rookies out there trying to create a multicam sequence like this, make sure that you 1) create the MultiCam Source Sequence and then 2) right click on the Multicam sequence icon in the project window and then 3) choose open in timeline.
    Once the project is open, verify that the camera views are sync'd and then drag the follow on video clips to the end of the appropriate video track.  Once that is done, right click on the Multicam icon again and choose New Sequence from clip and your complete project will be ready to edit.
    Thanks Mark for the quick response.

  • How can i change a video clip format that will play on a PC to play on my MAC

    How can i change a video clip format that will play on a PC to play on my MAC

    http://www.flip4mac.com/ supports all but DRM formatted Windows video.  http://www.videolan.org/ and MPEG4Streamclip may support additional.  DRM Windows video may require running Windows natively on your Mac.  Or requesting the source give you an MPEG4 compatible format or Realplayer formatted file.  Running Windows is described here: https://discussions.apple.com/docs/DOC-2741

  • How do you place a video clip at a particular location in imovie

    how do I place a video clip at a particular location in imovie?

    You'll probably have better luck with an iMovie question if you ask in the iMovie forum.
    Regards

  • How can I blend two video clips where they join side by side in one movie?

    Hello Marvelous Movie Making Minds,
    I am working with Adobe Premiere 6 on a Windows 7 machine.
    How can I blend two video clips where they join side by side in one movie?
    I know how to place two or more video clips together in the same movie, but how can I give them a bit of a blend just where they join?
    I have a PDF instruction manual and the built-in web browser instructions.  In the instruction manual in "Chapter 7: Superimposing and Compositing" it talks about the transparency of any video clip, and I understand that... but I don't want to make one or the other video clip transparent anyplace except where the two video clips join together with perhaps a bit of overlap.
    I'd like to make a little blur just where the two videos join in the middle... is this possible?
    Thanks,
    digi

    Aha that kind of blending.
    Have not used 6.5 in a loooooooong time.
    So this is from memory, hope i get this right.
    Set the two clip on top of each other
    Make a matte in Photoshop and superimpose this over the two clips.
    Go to the Transparancy Settings and set the top clip in video 2 to Alpha key.
    Screendump for matte:
    The right side is made black just for the forum but should be transparant.

  • How can I place a video clip in CS6 within an irregular shape

    How can I place a video clip in CS6 within an irregular shape please

    Many thanks. I should have mentioned that I meant for the video to be an irregular shape also. However from what you said I have worked it out so thanks again for quick response. Pete.

  • How to compress a short video clip to e-mail

    Trying to figure out how to compress a short video clip to e-mail. Not sure how to do this thanks

    Sarah,
    When you export/share your video you have a choice of formats.
    Windows Media is a good option and you can choose a preset. Some of the options are DSL/Cable, Dialup, and others.
    Steve's book has a nice section on Sharing Options, and he has a very nice article posted at Muvipix.com as well.
    http://muvipix.com/products.php?subcat_id=44
    You need to register to be able to view the article but the article and registration are both free :)

Maybe you are looking for