How do I leave a line?

I have this code.
LOOP AT ZLES_INT_ITAB INTO WA_B.
WRITE 'The object id '.
WRITE WA_B-ID.
WRITE ' is mandatory'.
ENDLOOP.
I am suppose to have an output of like this:
The object id 4 is mandatory.
The object id 5 is mandatory.
However my output is like this:
http://img255.imageshack.us/img255/4567/errorbp3.png
How am I suppose to get the output that I want?
I will reward any answers that can sort of solve my problems

Juz,
1. check the field type of object id .If it is char
DATA : v_string(200).
CONCATENATE 'The object id ' WA_B-ID
                           'is mandatory' INTO v_string SEPARATED BY SPACE.
LOOP AT ZLES_INT_ITAB INTO WA_B.
WRITE: / 'The object id ', WA_B-ID, 'is mandatory'.
ENDLOOP.
2. If it is integer
DATA : v_string(200),
           v_char (take length of object id).
MOVE : WA_B-ID TO v_char.
CONCATENATE 'The object id ' v_char
                           'is mandatory' INTO v_string SEPARATED BY SPACE.
LOOP AT ZLES_INT_ITAB INTO WA_B.
WRITE: / 'The object id ', WA_B-ID, 'is mandatory'.
ENDLOOP
Don't forget to reward if useful.....

Similar Messages

HP J6480 All in one leaves a line down the middle of the paper.

When I use the feed mode the printer squeeks and protest leaving a line down the middle of the paper. How can I get this resolved

Hi there billba,
This article covers clearing a carriage jam and gives steps used in clearing the carriage assembly. Give the steps a shot and let us know if it helps. Though it seems the product may need servicing.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Healing Brush "skips", leaves a line of brush-sized circles instead of a smooth line

When I use the healing brush is tends to "skip". It leaves a line of circles like a stamp would instead of a flowing line like it should leave. No matter how slow I move the brush it leaves a circle and then as I continue to draw nothing happens until I reach the edge of the first circle, it then drops another circle and it continues that way as long as I draw with it. The brush tool works fine, leaves a smooth line. The Spot Healing and Patch Tool work fine but the healing brush will not heal in a smooth stroke. It skips along a leaves a tail of circles the size of the brush. I am using a fast computer, i7 processor, 16bg ram and a SSD drive so I do not think speed is an issue. I upgraded from CS4 where the healing brush worked fine on this computer

If the spacing of a tool's brush is 100% then it will behave as you described.
Reduce the spacing to get a stroke without circles.
Reset Tool as shown by R_Kelly will set the spacing to 25%, but it'll also reset the size and hardness of the brush and reset other options of the tool.

How to find the current line in the table control in module pool ?

How to find the current line in the table control in module pool ?
This is an urgent requirement? please do help me.

refer to this example
REPORT demo_dynpro_tabcont_loop_at.
CONTROLS flights TYPE TABLEVIEW USING SCREEN 100.
DATA: cols LIKE LINE OF flights-cols,
lines TYPE i.
DATA: ok_code TYPE sy-ucomm,
      save_ok TYPE sy-ucomm.
DATA: itab TYPE TABLE OF demo_conn.
      TABLES demo_conn.
SELECT * FROM spfli INTO CORRESPONDING FIELDS OF TABLE itab.
LOOP AT flights-cols INTO cols WHERE index GT 2.
cols-screen-input = '0'.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDLOOP.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
DESCRIBE TABLE itab LINES lines.
flights-lines = lines.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE read_table_control INPUT.
MODIFY itab FROM demo_conn INDEX<b> flights-current_line.</b>
ENDMODULE.
MODULE user_command_0100 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
    WHEN 'TOGGLE'.
      LOOP AT flights-cols INTO cols WHERE index GT 2.
        IF cols-screen-input = '0'.
          cols-screen-input = '1'.
        ELSEIF cols-screen-input = '1'.
          cols-screen-input = '0'.
      ENDIF.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDLOOP.
    WHEN 'SORT_UP'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) ASCENDING.
        cols-selected = ' '.
MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'SORT_DOWN'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) DESCENDING.
        cols-selected = ' '.
MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'DELETE'.
      READ TABLE flights-cols INTO cols
                              WITH KEY screen-input = '1'.
      IF sy-subrc = 0.
        LOOP AT itab INTO demo_conn WHERE mark = 'X'.
          DELETE itab.
ENDLOOP.
      ENDIF.
ENDCASE.
ENDMODULE.

How do you specify a line number with getline() (c++)

How do you specify which line for getline() to read with c++ similiar to how awk uses $1, $2, $3 , etc etc...
Example:(Ignore the underscores)
Line1 Line2
10____10
20____20
30____30
40____40
if I were making a program to remove 10 on the first line and 20 on the second line how would I tell getline which line to read
Example source code:
#include <cstdio>
#include <fstream>
#include <string>
#include <iostream>
using namespace std;
int main()
string line;
string line2;
ifstream in("/Users/lundquisted/Desktop/infile.txt");
ofstream out("/Users/lundquisted/Desktop/outfile.txt");
while( getline(in,line) )
if(line != "10")
out << line << endl;
while (getline(in,line2) )
if(line2 != "20")
out << line2 << endl;
in.close();
out.close();
remove("/Users/lundquisted/Desktop/infile.txt");
rename("/Users/lundquisted/Desktop/outfile.txt","/Users/lundquisted/Desktop/inf ile.txt");
return 0;
}

Eric Lundquist wrote:
store the output of a system() command within a c++ program to a string and/or variable
A number of apps call Unix utilities and capture both stdout and stderr, typically for viewing in a log window, but for other uses as well. Xcode, for example, starts up gcc and does various things with the text that gcc might otherwise print in a Terminal window. Most apps that rely on Unix commands that way don't use "system()", which is a rather crude way of launching utilities that leaves the parent program with very little control. Usually, the best way to manage helper utils from a Cocoa app is by using NSTask and NSPipe. If you spend some time with the two following pages, you'll learn how to do almost anything you want with command line utils from inside a Cocoa app:
[http://www.cocoadevcentral.com/articles/000025.php]
[http://macosx.com/forums/archive/t-3927.html]
The first link goes to a great tutorial on using NSTask. Capturing stdout and stderr are only covered briefly towards the end, however. Note the last comment explaining why "system()" is a bad idea.
The second link goes to a forum thread. Scroll down to the code posted by "blb" for some very clear examples of launching with NSTask and reading the output with NSPipe.
If you really want to use a shell command, you could give NSTask a command like ' +bash -c "ls -lt | grep drwx"+ ' (see how setArguments: is used in the tutorial).
If you just want to do something cheap and dirty with "system()" so you can see some awk output while you're learning how to do things the right way, I guess you could do something like this:
system(" cat ~/random.txt | awk '{print $2}' > MyFile.txt");
NSString *myString = [NSString stringWithContentsOfFile:@"MyFile.txt"
encoding:NSUTF8StringEncoding error:nil];
Of course you can just read MyFile.txt into cin if you're not using Cocoa.
- Ray

How to delete string or line from unix file(dataset) of application server

Hi All,
After transfer workarea information or all records into dataset(unix file). When I see the file in application server automatically the last line is shown a blank line. I am not passing any blank line.
I have tried for single record than also the file generates the last line(2nd line) also a blank line.
When I m reading the dataset, it is not reading the last blank line but why it is showing the last blank line?
How to delete string or line from unix file(dataset) of application server?
Please give your comments to resolve this.
Thanks
Tirumula Rao Chinni

Hi Rio,
I faced similar kind of issue working with files on UNIX platform.
The line is a line feed to remove it use
DATA : lv_carr_linefd TYPE abap_cr_lf VALUE cl_abap_char_utilities=>cr_lf.
DATA : lv_carr_return TYPE char1,
         lv_line_feed   TYPE char1.
lv_line_feed   = lv_carr_linefd(1).
lv_carr_return = lv_carr_linefd+1(1).
Note: IMP: The character in ' ' is not space but is a special
character set by pressing ALT and +255 simultaneosly
REPLACE ALL OCCURRENCES OF lv_line_feed IN l_string WITH ' '.
REPLACE ALL OCCURRENCES OF lv_carr_return IN l_string WITH ' '.

How to give no of lines per page in alv report

hi
could anybody tell me
how to give no of lines per page in alv report
i need bottom of page too
if possible plz send the code too
it ll be very helpful to me
thanx
kals.

Hi,
This is possible, using some of the events in the ALV.
You could use AFTER_LINE_OUTPUT event and call you form after say, a certain line count is reached on the list output.
MOVE 'AFTER_LINE_OUTPUT' TO gw_event-name.
MOVE 'AFTER_LINE_OUTPUT' TO gw_event-form.
APPEND gw_event TO gt_events.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
            it_events                = gt_events[]
and define the form for each event as follows - this would be a dynamic call by the ALV.
*&      Form after_line_output
*       Form for the After Line Output Event in the internal table
*      --> rs_lineinfo
FORM after_line_output USING rs_lineinfo TYPE slis_lineinfo.
IF sy-linno eq v_linno.          "Defaulted value for line count
    perform write_footer.
    NEW-PAGE.
ENDIF.
ENDFORM.                    " after_line_output
For lines per page:
rs_lineinfo-tabindex would give you the index of the current line in the list, which you could use to read the t_outtab table, and reduce the line count of items displayed on the earlier page.
There are a few other events too, like BEFORE_LINE_OUTPUT and END_OF_LIST which you can use as required and print the data.
Regards,
Anil.

How 2 read all the line of a sales order text ID plz

Dear all
I have the following to read sales order text of single line of limited char(40)
TIDNO = '0003'.
    CONCATENATE SSORD
                LIPS-POSNR
    INTO        TNAME.
    TOBJT = 'VBBP'.
    PERFORM FINDTEXT.
    LOOP AT MSLINES.
      WA_ITEM-PACKTYP = mslines-tdline(40).
      EXIT.
    ENDLOOP.
How do i read mutiple lines plz tell me ?
Thnx
Moni
Message was edited by: md monirujjaman

Hi Md,
sorry I don't understand your question, can you explain more ?
Regards
Frédéric

Want to know how to check for new line character in text file

Hi All,
I`m trying to read data from text file. However I`m not sure whether the data is in 1st line or nth line. Now I`m trying to read the text from the readline. But if text is "" and not NULL then my code fails. So I want to know how to check for new line character and go to next line to find the data. Please help.
Thanks
static int readandwriteFile(Logger logger,String filepath){
          BufferedWriter out = null;
          BufferedReader in = null;
          File fr = null;
          int get_count = 0;
          try     {
          if(new File(filepath).exists())
          fr= new File(filepath);
                    System.out.println("FileName: "+fr);
               if(fr != null){
in = new BufferedReader(new FileReader(fr));
                         String text = in.readLine();
                         if(text != null){
                         get_count = Integer.parseInt(text);
                         in.close();
                         else{
                              get_count = 0;
     else{
out = new BufferedWriter(new FileWriter(filepath));
     out.write("0");
            out.close();
               }          //Reading of the row count file ended.
          catch(Exception e) {
               e.printStackTrace();
          finally {
               try{               if (in != null) {
                         in.close();
          if (out != null) {
                         out.close();
          catch(Exception e) {
                    e.printStackTrace();
          return get_count;
     }

You are calling the readline() only once which means you are reading only the first line from the file...
Use a loop (Do-While preferably)
do{
//your code
}while(text == "")

How can I use more lines to show a field of a row in a report?

How can I use more lines to show a field of a row in a report? Table A have two columns: (c1 number(5),c2 varchar2(1000)).When I show the table on a report,the column c2 show itself in one row.So the width of html page is very wide.How can I split the field c2 to many lines?
Thanks for any help.

I was wondering if an answer was found for this one.
I have the same problem using the default "Look 4" template for the region. I have found in the CSS file where it is defined and it specifies "nowrap" in the style, which is why the long value is not being split over multiple lines.
So, my question is, without modifying or creating templates, is there a way to override the "nowrap" attribute from within the item definition? e.g. in the Column Attributes.Column Formatting.CSS Style field. I had some success changing the display properties, such as background colour and font size but I can't seen to override the nowrap attribute!

How do you get a line with MULTIPLE fields to WRAP ?

How do you get a line with MULTIPLE fields to WRAP ?
Good afternoon everyone...
THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
A……………………… B
XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
But what if A is too long? I would want to see B wrap onto the next line like this:
A……………………………………………………B
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
YYYYYYYYYYYYY
And similarly….if B is extra long, can the line print as:
A………………………. B
XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
I don’t want the case where B is long and I get:
A………………… …B…
XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
………………………..YYYYYYYYYYYYYYYYYYYYY
I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
My SPECIFIC CASE
I have a report that I have stripped down to a simple structure for the purposes of this explanation.
My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
The LAYOUT MODEL has a group frame (the main , base one)
On top of this is a repeating frame based on the 1st group (family data).
On top of this is another repeating frame for the 2nd group (species data).
On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
All fields on the report line have variable horizontal elasticity.
The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
Can the line be made to WRAP????..
In my current report, 1 of 2 things is happening:
1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
But I would like a LONG line to continue printing onto the following line of the same page.
I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
I have been focussing my attention with this problem on the frames .
We are using REPORT BUILDER V 6.0.8.26.0
Thankyou to anyone who may offer assistance.
Tony Calabrese.

Steve,
you gain 1 thing, but you lose something else!
This thing is SO frustrating!
Hey Steve! Good afternoon.
I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
So it looks like:
&col1 &col2 &col3 &col4 &col5 etc etc etc
And the line expands nicely to each field's requirements.
And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
So I wanted something like (ignore the dots):
...................................ppppp
AAAA BBBB CCCCC DDDD EEEE FFFFFF
So the field of 'ppppp' appeared slightly higher on the line than the other fields...
I can't see how I can do this with a single TEXT field containing all the &COL values.
Have you ever come across anything like this?
Thankyou again,
Tony Calabrese 12/4/2007

How do I get Connection Line to show up in Pages

How do I open Connection Line in Pages. It is grayed out in my menu. Thank you!

As Jerry says:
Click on (only) 2 floating objects at a time. It sounds like you have more than 2 selected, otherwise you would not even see thee the menu option.
Peter

How to delete the logical lines in JTextArea

Hi all,
Now that I know how to find the logical line count in JTextArea as
I found the following in the forum.
public static int getLineCount (JTextArea _textArea)
boolean lineWrapHolder = _textArea.getLineWrap();
_textArea.setLineWrap(false);
double height = _textArea.getPreferredSize().getHeight();
_textArea.setLineWrap(lineWrapHolder);
double rowSize = height/_textArea.getLineCount();
return (int) (_textArea.getPreferredSize().getHeight() / rowSize);
I want to delete the 4th line to the last line and append ... at the 4th, if the getLineCount exceeds 3. Does any body know how to do so?
The intention is for the multiline tooltip as I just want to show
the first three logical line and ... if the string is too long.
Thanks
Pin

The code looks good to me. The only thought I have is that the y coordinate for the rowThree point is wrong and is referencing row four.
I've been playing around with using a JTextArea as a renderer for a JTable. I have it working so that "..." appear when the text exceeds 2 rows. Try clicking on "B" in the letter column and then the update cell button a few times to add text. My code is slightly different than yours.
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import javax.swing.*;
import javax.swing.table.*;
public class TestTable extends JFrame
     private final static String LETTERS = "ABCDEFGHIJKLMNOPQRSTUVWXYZ";
     JTable table;
     Vector row;
     public TestTable()
          Object[][] data = { {"1", "A"}, {"2", "B"}, {"3", "C"} };
          String[] columnNames = {"Number","Letter"};
          DefaultTableModel model = new DefaultTableModel(data, columnNames);
          table = new JTable(model)
               public String getToolTipText( MouseEvent e )
                    int row = rowAtPoint( e.getPoint() );
                    int column = columnAtPoint( e.getPoint() );
                    if (row == 0)
                         return null;
                    else
                         return row + " : " + column;
          table.setRowSelectionInterval(0, 0);
          table.setColumnSelectionInterval(0, 0);
          table.setRowHeight(0,34);
          table.setRowHeight(1,34);
          table.setRowHeight(2,34);
          table.setDefaultRenderer(Object.class, new TextAreaRenderer(2));
          JScrollPane scrollPane = new JScrollPane( table );
          getContentPane().add( scrollPane );
          JPanel buttonPanel = new JPanel();
          getContentPane().add( buttonPanel, BorderLayout.SOUTH );
          JButton button2 = new JButton( "Update Cell" );
          buttonPanel.add( button2 );
          button2.addActionListener( new ActionListener()
               public void actionPerformed(ActionEvent e)
                    int row = table.getSelectedRow();
                    int column = table.getSelectedColumn();
                    String value = (String)table.getValueAt(row, column);
                    value += value;
                    table.setValueAt( value, row, column );
                    DefaultTableModel model = (DefaultTableModel)table.getModel();
                    model.fireTableCellUpdated(row, column);
                    table.requestFocus();
     public static void main(String[] args)
          TestTable frame = new TestTable();
          frame.setDefaultCloseOperation( EXIT_ON_CLOSE );
          frame.pack();
          frame.setVisible(true);
     private class TextAreaRenderer extends JTextArea implements TableCellRenderer
          public TextAreaRenderer(int displayRows)
               setRows(displayRows);
               setLineWrap( true );
          public Component getTableCellRendererComponent(JTable table,
                                         Object value,
                                         boolean isSelected,
                                         boolean hasFocus,
                                         int row,
                                         int column)
               setText( value.toString() );
               Dimension d = getPreferredSize();
               int maximumHeight = getRows() * getRowHeight();
               if (d.height > maximumHeight)
                    setSize(d);
                    int offset = viewToModel( new Point(d.width, maximumHeight - 1) );
                    replaceRange( "...", offset-3, getDocument().getLength() );
               return this;
}

How to delete the specified line in file?

How to delete the specified line in file? In case of deleting a specified line in a file, how to do?
Line 1
Line 2
Line 3
Line 4
Line 5
The case is a file including the above content. Now I wanna to delete the "Line 3" and how to realize the action in Java?

An alternative solution can be :
import java.io.LineNumberReader;
import java.io.IOException;
import java.io.File;
import java.io.FileReader;
import java.io.BufferedWriter;
import java.io.FileWriter;
import java.io.PrintWriter;
public class LineDeleter {
public static void main(String args[]){
try {
//suppose you want to delete line 3
     int lineToBeDeleted = 3;
     File f = new File("line.txt");
     long fileSize = f.length();
//Wrap the FileReader with a LineNumberReader. It will help you
//identify the lines.
LineNumberReader lnr = new LineNumberReader( new FileReader(f));
//Wrap the FileWriter object with BufferedWriter object. Create it with the buffersize
//equal to the file size.
     BufferedWriter bw = new BufferedWriter(new FileWriter(new File("line1.txt")),(int)fileSize);
//Wrap BufferedWriter object with PrintWriter so that it allows you
//to print line by line
PrintWriter pw = new PrintWriter(bw);
     String s=null;
     while ( (s=lnr.readLine())!=null ){
          System.out.println(s);
          int lineNumber = lnr.getLineNumber();
//match the line number
          if(! (lineNumber==lineToBeDeleted)){
               pw.println(s);
          pw.flush();
          lnr.close();
          pw.close();
     catch(Exception e){System.out.println(e);}
If you want you can rename the line1.txt to the original file name.
I hope this helps.Good luck!!!!!!

How can i remove a line from an ordinary text file?

It is easy to remove a line from a file by rewriting the file. how can i remove a line without rewriting ? Also, do not use whitespaces to overwrite the line. I expect a perfect line deletion code .....

gimbal2 wrote:
hsc71 wrote:
It's the way you communicate. Try to be carefull with the words you use in your post. It's easy to insult people just by choosing the wrong words. Bold text and capitals is equal to shouting.
shock. You said "wrong words". I am seriously offended by that!
Seriously, would you care that I am offended? I really hope not... Say what you want, people will find reasons to take offense one way or the other.Hehe, maybe you're right, but the OP still has no answer.............and in the end that's what he/she is looking for.

How do I leave a line?

Similar Messages

Maybe you are looking for