How do i leave Bt BB while in contract?

Hi guys, so ive been having terrible problems with my broadband speed and dispite loads of calls to BT, an enerneer visit my broadband is still under 1000kbs downstream and its not fair that i am being made to pay for this, when my line is capable of 4000kbps downstream, which is what i was getting prio to my problems. We are stuck in a 18 month contract but theres no way im paying for a service which im not getting, could anybody tell me how i can get out of contract and aviod a early cancelation fee? Im not being funny or anything but this just isnt very fair and BT simply dont care and have not fixed my problem so why should i be forced to stay and pay?

Hi,
Yes I was in very similar position in June to Mid August this August 2010. The term needed to use is Material Cost and the loss of it to you. This is hidden in the term and conditions. However this is not a simple quick answer. A few points I would recommend would be, keeping a record of dates you have contacted Helpline. Also a record of engineer appointments and there conclusions on the issue (be prepared to quote them). Firstly write to Bt complaints stating all the hassle.
When on the phone next time to helpline they will always ask for one more chance, Then give them all the info you have gavered tell them how much it costs you to have this service, quote material cost and how unhappy you are with this remember to quote the engineers . Refuse another visit from the engineer, in fact refuse any procedure that involves your home (Only if you are sure there is no fault at home) My case I was offered cancellation at no cost, I was 5 wks into a 18 month contract. However they did refuse for some time to give me the MAC code (Naughty), this enables a free passage to another ISP. They also keep a record of all communication calls, emails, letters.
However I'm still a BT customer, due to the Mods here and have the service I expected to have. What appears to have happened was they wanted to avoid at any cost, was any work on the exchange, I felt this was the problem and it was.
Strangley my MAC code expired today!!
Mortgage Advisor 2000-2008
Green Energy Advisor 2008-2010
Charity Health Care Provider Advisor 2010-
I'm alright Jack....

Similar Messages

How can I have one thing open in Safari on my MacBook Pro and search for another thing in Safari without closing out of the other? For instance, How can I leave Pandora playing while I search Facebook?

How can I have one thing open in Safari on my MacBook Pro and search for another thing in Safari without closing out of the other? For instance, How can I leave Pandora playing while I search Facebook?

With Safari open use the Command + T keyboard shortcut to open a new tab.
Or, Command + N to open a new window.

How can we handle browser settings while dealing with the security ?

Hi ,
how can we handle browser settings while dealing with the security ?When we configured security in web.xml , during the first request the container is asking for the authentication credentials once they are provided it go's on. but when the user gives a fresh request from the second window within the same browser that time it is not asking for authentication. How can we overcome this.Is there anything to do with server configurations?
How can we make the container no to keep the things or act like session?

Ya... I am taking a small example need not happen always but a kind of possibility i am thinking off.
once the user sign out and just left without closing the browser and a friend (suppose not a good friend ... just kidding...) of that user may open the same jsp or file .This time the security is breached. If that feature or property exists....
I know what you might say ... the user will log-out before leaving where a programer might invalidate the session at the time of log out.
Consider the case of a bad Programing or just a programer might forget to invalidate,At that time as a application administrator how can he solve that issue.
Thanks.......
Edited by: user8483670 on Jun 6, 2011 1:08 AM
Edited by: user8483670 on Jun 6, 2011 1:09 AM

How do I sort or reorganize while using the new Numbers 3.0

How do I sort or reorganize while using the new Numbers 3.0; I can't seem to find the sort icon.
Thanks
ActiveSolutions

Yes, I understand the convenience of the old Reorganize panel. I thought it was great. The problem is (I'm guessing) that it is really hard to do something like that in Numbers iOS and Numbers for iCloud. So they gave us features that are more likely to work across all platforms.
If you need to sort just selected rows you could put the =A&C&B formula (or whatever order you need) in just the rows you need to sort. Leave the other cells in column D blank.
Or, if you're doing a LOT of partial sorting like that maybe you should have the data in separate tables anyway.
Not saying it's great... just saying there are workarounds... until (if) something like the Reorganize panel comes back by popular acclaim.
SG

How do you surf the web while you are on the iphone?

How do you search the web while you are having a phone conversation? do you have to put the phone on speaker?

You dont have to, but it is hard to listen and look at the screen at the same time. You can also use a bluetooth headset or ear phone that came with the phone. Remember you can not do both at the ame time on Verizon.

How to get ALL validate-errors while insert xml-file into xml_schema_table

How to get all validate-errors while using insert into xml_schema when having a xml-instance with more then one error inside ?
Hi,
I can validate a xml-file by using isSchemaValid() - function to get the validate-status 0 or 1 .
To get a error-output about the reason I do validate
the xml-file against xdb-schema, by insert it into schema_table.
When more than one validate-errors inside the xml-file,
the exception shows me the first error only.
How to get all errors at one time ?
regards
Norbert
... for example like this matter:
declare
     xmldoc CLOB;
     vStatus varchar
begin
-- ... create xmldoc by using DBMS_XMLGEN ...
-- validate by using insert ( I do not need insert ;-) )
     begin
     -- there is the xml_schema in xdb with defaultTable XML_SCHEMA_DEFAULT_TABLE
     insert into XML_SCHEMA_DEFAULT_TABLE values (xmltype(xmldoc) ) ;
     vStatus := 'XML-Instance is valid ' ;
     exception
     when others then
     -- it's only the first error while parsing the xml-file :
          vStatus := 'Instance is NOT valid: '||sqlerrm ;
          dbms_output.put_line( vStatus );
     end ;
end ;

If I am not mistaken, the you probably could google this one while using "Steven Feuerstein Validation" or such. I know I have seen a very decent validation / error handling from Steven about this.

How can I opearate indicator outside while loop?

I do small program, I have many while loops and I want to connect wire (in my application) from each loop to AND gate then to another while loop, but how can I operate these wires to agree with the change of my application inside while loops.
If not clear :
In another words, suppose I want to operate indicator ouside the while loop. How can I operate indicator outside while loop, so when my application become TRUE (inside while loop) the indicator will be ON (outside while loop) and when my application become FALSE(inside while loop) the indicator will be OFF (outside while loop).
Help me if you have any idea please..........................

Hi Rammo,
For the wire to carry the boolean condition from the while loop to an 'and' gate outside, the while loop must stop running
If you want the while loop to keep on running and still pass a boolean value to a destination outside the while loop, use any one of these: property nodes, global or local variables.
i am still not clear as to what you intend to say by this sentence
" I want the wire that comes out from the while loop will become TRUE if it in my application is TRUE inside while loop and the opposite is true. Because I want to connect the wire that comes out from while loop to AND gate than to another application"
plz tell me if the first part of this mail of mine answers your doubt or do you need more information?
regards
Dev

How can I join 3 tables while extracting data from SAP R/3?

I have 3 tables with the following columns
Emp table (emp)
emp_id
emp_name
emp_add
Dept table (dept)
dept_id
dept_name
dept_loc
Location table (loc)
loc_id
loc_name
Now. If I want to select data from loc_id = 10 and emp_id between 2000 and 3000
How to join these three tables while extracting data from R/3
join condition
loc.loc_id = dept.loc_id
and dept.dept_id = emp.dept_id
and loc.loc_id =10
and emp.emp_id between 2000 and 3000.
Could any one let me know the procedure to extract this data into BW system.

Hi,
shouldn't your join condition be:
loc.loc_id = dept.DEPT_LOC
and dept.dept_id = ??
If you can join the three tables then create a generic datasource (RSO) based on a view (create your view with your join in SE11).
Enable the loc_id and the emp_id as selectable in the datasource so you can then select the values from a BW IPack.
hope this helps...
Olivier.

How to fix itunes error 1611 while restoring ios 4.3.2 , and when i restore to 4.2.1 the can be ok.plz help me

how to fix itunes error 1611 while restoring ios 4.3.2 , and when i restore to 4.2.1 the can be ok.plz help me

have a look at this support article.

I recently discovered my ipod touch would no longer turn on. All it does is show the low battery sign, and that is if it's connected to a computer. No matter how long I leave it charging, it does that. Is there a way to fix it?

Hi, I recently discovered my ipod touch would no longer turn on. I've tried everything! All it does is show the low battery sign, and that is if it's connected to a computer. No matter how long I leave it charging, it does that. Is there a way to fix it? All I want are my contacts and my old calendar back. These did not sync with iTunes like my photos, music, and video. I can probably get an older, replacement iPod, but I don't want to have to readd all my important dates and reminders, as well as contact information. I guess I have two questions:
1) is there a way to get my ipod to start working again?
2) is there a way to get my old contacts and calendar back again?

Try here:
iPod touch: Hardware troubleshooting
iOS: Not responding or does not turn on
To get the calender and contacts back if you can't get the iPod working is to restore the new iPod from the backup of the old one.

How to get file from server while click on link

Hi,
i created on link and i gave one server path to select file from server but while clickinng on link it no displaying any thing.
following is the Destination url that i gave for the item.
/u08/app/appvis/xxex/inst/xxex_apps/xxrbe/logs/appl/conc/log/
please tell me how to get file from server while click on link.

Ok I got your requirement now.
If you are getting file names from view attribute then you should not be adding destination URI property for the link.
Instead you can use OADataBoundValueViewObject API.
Try below code in your controller processRequest method:
I am assuming that you are using classic table.
Also in below example it considers OAMessageStyleText and you can replace it with link item if you want.
OATableBean tableBean =
(OATableBean)webBean.findChildRecursive("<table item id>");
OAMessageStyledTextBean m= (OAMessageStyledTextBean)tableBean.findChildRecursive("<message styled text in table item id>");
OADataBoundValueViewObject tip1 = new OADataBoundValueViewObject(m, "/u08/app/appvis/xxex/inst/xxex_apps/xxrbe/logs/appl/conc/log/"+"<vo attr name which stores file name for each row>");
m.setAttributeValue(oracle.cabo.ui.UIConstants.DESTINATION_ATTR, tip1);
Regards,
Sandeep M.

How can I leave an empty row?

Hi,
If I want to use GridBagLayout, how can I leave an empty row? Or empty column? When I create the buttons on a frame, are they created sequentially? so Is that mean I can't put something back to the first row later in the program? Thx.
Adrian

I'm just guessing, since I havent done Java for a long time... but if you want an empty row... what pops up in my mind first is like putting in an empty JLabel/Label... for that row... but then if you wanna fill it in... i dunno...

How to Reset Password of User while not connected to Domain using Local Admin Account

How to Reset Password of User while not connected to the Domain using Local Admin Account
(I have the use of a local admin account), and I want to help a user reset their password who has logged in the PC and had their credentials cached, but forgot this password.
In Local Admin Account :
When I go to Control Panel, users, users, manager user ; I cannot see any users in this window except the local admin account, and, so I cannot reset a user password this way.
When I go to lusrmgr.msc, then users ; the local admin account will display only.
If I go to command prompt and type "net user", this will not display any users who have logged in to the computer, and so I cannot use "net user" to reset a password.
I don't want to use any disks, 3rd party programs, or create a VPN connection to the domain. I just want to help a user who calls in and forgets their password.

Hello Keith,
I know this is an old thread but I'm trying to better understand how I could change the domain password while not on the network. What I'm getting from your post is that you:
1. Create a local user account (not a domain user)
2. Login with that local user account
3. Connect to the VPN while logged in as a local user
4. Log out of the local account and login with the domain credentials
Now, my question is based on the assumption that the password created on the local account is the same password that one will use to login to the domain account? Also, is the local user account the same as the domain account?
Thanking you in advance!

How to set default file path while downloading alv output

Hi,
Can anyone tell me that how to set default file path while downloading the ALV output to system using Local file button on tool bar.
Please look below screenshots:
Kindly help me resolve it.
Thanks in advance.
Regards,
Ashutosh Katara

This information initial value is (maybe) stored in Windows Register (register.exe) at Software\SAP\SAPGUI Front\SAP Frontend Server\Filetransfer -> PathDownload, you can read it thru class CL_GUI_FRONTEND_SERVICES method GET_UPLOAD_DOWNLOAD_PATH and update it thru method REGISTRY_SET_VALUE. (Else there may be some parameter ID to force data, but I'm no longer sure)
Regards,
Raymond

How to resolve "open failed"error while starting dbisqlc utility in UNIX b

how to resolve the following error while starting dbisqlc utility in UNIX box...??
Unix Prompt% which dbisqlc
/sybase/asiq12/bin/dbisqlc
Unix Prompt%
Unix Prompt% dbisqlc
ld.so.1: dbisqlc: fatal: libdblib9_r.so: open failed: No such file or directory
zsh: killed dbisqlc
Unix Prompt%

rm.vikram wrote:
how to resolve the following error while starting dbisqlc utility in UNIX box...??
Unix Prompt% which dbisqlc
/sybase/asiq12/bin/dbisqlc
Unix Prompt%
Unix Prompt% dbisqlc
ld.so.1: dbisqlc: fatal: libdblib9_r.so: open failed: No such file or directory
zsh: killed dbisqlc
Unix Prompt%It may not help, but a quick google search for that library gave a link to http://www.sybase.com/content/1040797/deployadmintoolslinux.pdf, and from within that:
Interactive SQL files
Copy the following files from your reference installation:
/opt/sybase/SYBSsa9/bin/dbisql
/opt/sybase/SYBSsa9/java/dbmaen9.jar
/opt/sybase/SYBSsa9/java/isql.jar
/opt/sybase/SYBSsa9/java/jlogon.jar
/opt/sybase/SYBSsa9/java/xerces.jar
/opt/sybase/SYBSsa9/java/xml4j.jar
3
Copyright © 2004 iAnywhere Solutions, Inc.
/opt/sybase/SYBSsa9/lib/libdblib9_r.so.1
/opt/sybase/SYBSsa9/lib/libdbtool9_r.so.1
/opt/sybase/SYBSsa9/res/asa.cvf
/opt/sybase/SYBSsa9/res/dblgen9.res
/opt/sybase/shared/java/HelpManager11.jar
/opt/sybase/shared/java/JComponents142.jar
/opt/sybase/shared/java/SCEditor142.jar
/opt/sybase/shared/java/jsyblib142.jar
/opt/sybase/shared/sun/javahelp-1_1/jh.jar
Create the following symbolic links in /opt/SYBSsa9/lib:
libdblib9_r.so -> libdblib9_r.so.1
libdbtool9_r.so -> libdbtool9_r.so.1which may suggest a solution.

How do i leave Bt BB while in contract?

Similar Messages

Maybe you are looking for