How do I leave delete all of my emails in one account

How do I delete all of the email in one single account?  I have three accounts on my iPad.

Aha, here is the trick:
go to the mailbox you want to delete all the mail from
select any one message
press and hold the move button, and while you are still holding it, deselect the email you selected
wait a few second
it will select ALL the emails with an option to move, and you can move them to the trash.
Unlike the select all method that used to be possible, you will not get a list of selected emails with the option to deselect some of them.  So if there were a few you wanted to keep, you will have to go to the trash box, find them and rescue them.

Similar Messages

  • How do I delete all of my emails in one go

    Since  downloading ios8 I have had a problem with my emails. I had 497 emails but I can't delete them all at once as they are phishing emails. All I get is All mailboxes, but I need another mailbox so I can delete them

    I believe scottishroyalty is mistaken.  As far as I know there are no contacts stored within iTunes.  He must mean that he deleted duplicate contacts within the Contacts app on his computer.
    The issue I have with sberman's solution is that after using that method to delete all contacts on your iPhone, when you turn the Contacts switch back to "ON" in your phone's iCloud settings all the old contacts are put back on your phone and you're right back where you started.
    I posted a very detailed account of my issue here:
    http://forums.macrumors.com/showthread.php?p=17047143#post17047143
    If anyone knows how to delete old/unwated contacts from your iPhone and from iCloud and have them remain deleted, yet continue to have iCloud sync with the iPhone, please follow the above link and let me know. 
    Thanks for any help!

  • How do I get mac mail to show all of my emails in my inbox? It currently shows all of my emails in one account and only 7 days in my other account.

    Help

    How are you accessing the "7 days" account: IMAP or POP?
    Are there other computers accessing the same account?

  • How can i delete all of the emails in my inbox at one time?

    How can I delete all of the email messages in my Inbox all at once?

    You can't. You highlight each one, then hit delete. Once in your trash, you'll have the delete all button.

  • How can you delete all the e mail at one time instead of one at a time?

    How can you delete all the e mail at one time instead of one at a time?

    you'd have to do it from the computer,

  • How do i delete all of the emails in my in box without having to click on each and every one ?

    how do i delete all of the emails from my in box without having to click on each one ?

    Press CTRL+click on any empty checkbox to check them all.
    tt2

  • How do I wipe/delete all of the data in my Mail App on OS10.10?

    I want to delete everything connected to Mail App on my OS X device. 
    How do I wipe/delete all of the data in my Mail App on OS10.10?
    Thank you.

    Remove your email accounts from Mail. Quite Mail. Navigate to the /Home/Library/ folder. Locate the Mail folder and drag it to the Trash. Go to the Preferences folder and locate all preference files starting with "com.apple.mail" and drag them to the Trash. Go to the Containers folder and drag the two com.apple. mail related folders to the Trash.
    Exposing the /Home/Library/ Folder
    Pick one of the following methods:
    A. This method will make the folder visible permanently. Open the Terminal application in your Utilities folder and paste the following at the command prompt:
    chflags nohidden ~/Library
    Press RETURN.
    B. Click on the Desktop, press the OPTION (⌥) button, select Library from the Finder's Go menu.
    C. Select Go To Folder from the Finder's Go menu. Paste the following in the path field:
    ~/Library
    Press the Go button.
    Do not re-open Mail lest it attempt to re-populate all that information from iCloud.

  • How do I permanently delete all website history so its not found

    How do I permanently delete all website history so its not going to be re-found on my macbook air

    From your Safari menu bar click History > Clear History
    Or, back to the menu bar click Safari > Preferences then select the General tab.
    Click the:  Remove history items pop up menu then make a selection.
    Back to the menu bar, click Safari > Private Browsing
    With that enabled Safari won't remeember visited pages, history, or AutoFill information.

  • How do I delete ALL my sent emails from my iPad at once?

    How do I delete ALL my sent emails from my iPad at once? I can do the inbox but not the sent.

    There is no built in way to do this in iOS. If this trick doesn't work for you, then it can't be done.
    http://www.conferencesthatwork.com/index.php/technology/2014/01/how-to-delete-al l-mail-messages-from-iphoneipad-in-one-step/

  • Could someone please tell me how to delete all my many emails at once on my iPad 2? Thank you

    Could someone please tell me hoe to delete all my many emails on iPad 2 all at once? Thank you

    You can't delete them all at once on the iPad. You have to select them one at a time. Once the emails are in the trash, you can Delete All from there.

  • I purchased a used 2008 iMac. And although the previous owner said he deleted all of his information his iCloud account is still the primary. I don't have a clue about what to do about it. I signed him out and logged in with my info, but still no go.

    I purchased a used 2008 iMac. And although the previous owner said he deleted all of his information, his iCloud account is still the primary. I don't have a clue about what to do about it. I signed him out and logged in with my info, but still no go. Is there any way to eliminate his iCloud account and make mine the primary without rebooting it back to factory settings? There was an update, I believe, that I couldn't install because i didn't have his password that is what made me aware that his acct. was still active. I don't know what to do. Any help is greatly appreciated. Thank you.

    Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
    The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
    How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
    1. If you don't own another Mac
    a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
    2. If you do own another Mac
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    3. Partition and install OS X
    a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
    b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the  Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    c. An unusual problem may arise if all the following conditions apply:
              OS X 10.7 or later was installed by the previous owner
              The startup volume was encrypted with FileVault
              You're booted in Recovery mode (that is, not from a 10.6 installation disc)
    In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
    d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
    4. Other issues
    a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

  • Permanently deleting all my old email

    How can I permanently delete my 4000 old emails?

    ro11 wrote:
    How can I permanently delete my 4000 old emails?
    In your email account, go to Settings,  General Settings and set the Number of messages per page to "no limit."   Then  in Conversations, click the top box (just below delete)  which will select all messages.  Then click Delete.  It may take a few minutes to delete that many. 
    That will be as permanent as you can make it.  But just like deleted files on your computer, delete doesn't destroy all traces.  

  • How do i leave a copy off sent emails on the server with mac mail

    How do i leave a copy off sent emails on the server with mac mail.
    Pop account

    Check your mail preferences. The example below is from the mail app that comes with mac. In my case I'm using yahoo mail which is a POP3 account. POP stands for post office protocol which is the set of rules used by a POP mail account to transfer mail. You can learn more about it here if interested. If the box below is checked, all the mail will be downloaded to your computer when you check your mail using the built in mail app and removed from the mail server. Here is another page to help you set up your hotmail account for use the the mac mail application. Hope this clears things up.

  • When is there going to be a select all/delete all option in email? I need to search for certain emails and delet them from my phone but not my email program (Outlook)

    when will there be a select all/delete all option in Emails? I have a large number of emails that come to my phone which i dont want to delete from my outlook mail account (On my PC). However, i want to be able to search, select all and delete these emails from my phone? I do not use ICloud either as it causes issues with my calendars at work.
    These features should be a standard as there are plenty of other users out there that are trying to do the same thing and as yet there has been no progress? The email on the iphone is one of the biggest downfalls of the phone, blackberry and android handle them much better, but i dont have an option with my phone at work. Please help??

    No one here would have any idea when or if such a feature would be introduced until and unless Apple announces it.

  • My grandson deleted my phone, contacts email and one other setting from my new iPhone 4s. How do I recover them????? HELP

    My grandson deleted my phone, contacts, email and one other icon from the bottom of my iPhone 4s screen. How do I recover them????? HELP!!!!

    If they are in a folder, tap the folder and tap and hold the icon and move it out of the folder and on to the screen you wish. If they are on a different screen, tap and hold the icon until it wiggles, then move it to the edge of the screen and hold for a second or two until it jumps to he adjacent screen.

Maybe you are looking for

  • How to compile the Java classes generated in JAXB

    I am using Windows 2000 Operating System. I found a xjc batch file on the sun's java forum. I used that to generate classes from XML. After generating the classes I could not compile the classes each depends on other AND THEY REQUIRE BOTH CLASS FILES

  • User Status tables?

    Hi Guys,               My requirement is i have to download the delta part for all these tables PROJ , JEST , JSTO ,TJ30 ,TJ30T and J02T based on the last changed date for all these Tables.               How to filter these tables TJ02T , TJ30 and TJ

  • What is the code to get the  Label of  radio button item at runtime?

    Hi All I am working on forms 10g(version 10.1.2.0.2 ) with Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 on windows 2000 platform. My requirement is to dynamically get the label of the radio button item in a radio group.I am able to get t

  • Click to 'add a device' in synch brings me to website, not allowing me to add another device.

    I am trying to add my old laptop to synch after re-imaging. following the directions I go to Synch/preferences/'Add a Device' Clicking on that brings me to: http://support.mozilla.com/en-US/kb/How%20to%20set%20up%20Firefox%20Home%20on%20your%20iPhone

  • Re: Problem using weblogic6.1 to show image via JSP

              Thanks.           But why on Tomcat it can work ??