How do I legitimately crop a video to 2.35:1 rather than just artificially do it.

So premiere allows you to use the crop effect, or crop the video during the exporting (on source you can delete pixels on top and bottom). But this only adds black bars to the video, the video is still physically a 16:9 video, just with black.
How can I do this. (I want to upload to vimeo and it be a legitimate 2.35:1 video rather than a 16:9 with black bars).
Thanks
TJ

dont worry about "Source scaling", can leave that on "scale to fit". just change the output resolution to match the crop. uncheck aspect ratio icon (the chain link) so you can adjust the height pixels independent of the width.

Similar Messages

How do I configure my Software limits to Kill a motor, rather than just halt the motion?

I am running on board programs. I have my software limits enabled. Occasionally, my program corrupts and I hit a software limit. The motion stops by halting the motors, but they are still on. As a result, the on board progam kicks in again, and the motors start back up again. Depending upon the program, this can lead to very dangerous results.
How can I set the software limits such that they kill the motors, rather than just halting them?

You will need to poll the status of the software limits (using the Read Limit Status VI, limit type inptu set to software limits). Once the status is True, such that the software limit has been tripped, execute a Stop Motion VI, with the Stop type input set to Kill.
This example program uses these two VIs, but you will need to modify it for your own application in the way I mentioned above:
Finding the limits of a Motion System
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3EAB756A4E034080020E74861&p_node=DZ52468&p_source=External
Regards-
Julie S
Applications Engineer
National Instruments

How can i get the full URL of a page displayed rather than just the main website URL

I'm using Safari 8.0 on an iMac. When I go to a website I'm used to seeing a specific page URL displayed /changing as I navigate around a site through its various subsections etc. Now after updating to Yosemite all I get is the URL of the general website. This means I can't make specific references/links in work that I'm doing/sharing. There must surely be a way of getting the info into the bar so that I can copy it .... can anyone help please?

Jorge Huedo wrote:
> Yeah i know it was because i was getting crazy and i wanted to see debuggin if the image really existed in the km.
> Okey I have use the IUrlGeneratorService like this.
>
>      IURLGeneratorService ugs = (IURLGeneratorService) ResourceFactory.getInstance().getServiceFactory().getService(IServiceTypesConst.URLGENERATOR_SERVICE);
>      IUriReference uriRef;
>      uriRef = ugs.getRelativeUri(PathKey.IMAGE_PATH).appendPath(
>      resourceimg.getRID().toExternalForm());
>
> And it has returned me the next url:
>
> irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/etc/public/mimes/images/pip_hesaeventos/blank.JPG
>
> Now i have added to the base of the server the url:
>
> http://altp4.es.heiway.net:54500/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/etc/public/mimes/images/pip_hesaeventos/blank.JPG
>
> And the return is:
>
> 404
> El recurso solicitado no está disponible.
>
> Any idea?
You need to use the propert PathKey; I think CONTENT_ACCESS should be correct.

When recording a video using quicktime and my built in camera (isight) how come the program wont let me use my audio interface rather than the built in mike?

when recording a video using quicktime and my built in camera (isight) how come the program wont let me use my audio interface rather than the built in mike?

when recording a video using quicktime and my built in camera (isight) how come the program wont let me use my audio interface rather than the built in mike?
The basic answer is that Apple has not programmed the capture routine with this capability. As such, you can always send QT feedback requesting this feature be added as a future enhancement.

I am trying to update my time machine backup on time capsule, but time machine keeps trying to create an entirely new backup (evidenced by the 200GB backup size). How can I get time machine to modify my old backup rather than create a new one?

I am trying to update my time machine backup on time capsule, but time machine keeps trying to create an entirely new backup (evidenced by the 200GB backup size). How can I get time machine to modify my old backup rather than create a new one?

It must have found the old backup corrupt.. so you will more than likely have little choice. You can archive off the old backup if it is still useful.
You can also verify it. See A5 http://pondini.org/TM/Troubleshooting.html
He also has some info on this problem. eg C13.

How do I see the charts for all countries rather than just my own country simultaneously in iTunes? The album chart...

I produced a song on Lecrae's new album, Gravity, "Higher" f/Tenth Ave North, which is #1 in the US today upon its release. But I've heard that it also topped charts in other countries as well, and do not know how to adjust the Top Album Charts view to show me the top 10 albums in each country rather than just in the US. I've done it before, but over a year ago when Rehab: The Overdose dropped, but can't recall how I did it. Please help! Thanks and God bless...

I agree that this does work. Thanks.
However, I now have the issue that I scroll the whole screen down to show the shows at the bottom. When I highlight the last show, the 10 shows are not visibile as they are at the top of the screen. I have to scroll the whole screen back up to the top to see episodes.
This is not the most elegant solution but at least with lots of double scrolling, it is possible.

How can I change my safari preferences to save a file rather than download

How can I change my safari preferences to save a file rather than it downloading

danieladorotiak wrote:
When I click on the 'save application file, it download's it and doesn't give me the option to save it.
I can't be sure, but what probably happens is that the page doesn't give you a link to a downloadable file, but a button which activates a script. There's nothing you can do about that, because you don't control the script.
it just downloads the transcripts not the document.
It sounds like the downloaded file does not open or execute as it's supposed to (which, for instance, would happen if what you downloaded was a Java application, but you didn't have Java installed).
If you are allowed to, give us the URL and we'll have a look. Also, you should add what version of Mac OS X and of Safari you are using, and you should correct your profile (which says "Mac Pro" -- this forum is for the MacBook Pro, which is a different computer from the Mac Pro).

How can I get Elements 11 to open up in Organizer rather than Editor?

How can I get Elements 11 to open up in Organizer rather than in Editor?

Well, you can go to Window>Welcome and make your change there, but the welcome screen leaves a process always running, so you would do better to go into the Program Files or Program Files (x86) in windows or the applications folder on a mac and find the actual .exe/application for the organizer and make a desktop shortcut/dock icon and use that in the future to launch the organizer, avoiding the welcome screen entirely.

I'v just installed creative cloud 64 bit windows. How can I make bridge the default program to upload pictures rather than lightroom?

I've just installed creative cloud 64 bit windows. How can I make bridge the default program to upload pictures rather than lightroom?

Usually the default program associated with an image file extension is an image developing Program like Lightroom or an image editing program like Photoshop. If you want to change the default associated program to Adobe Bridge you would use Window's Controls Panel file association applet.

Client wants social links to "share" rather than just link to... how do I or can I do this with Muse

client wants social links to "share" rather than just link to... how do I or can I do this with Muse

Thanks. do the others (twitter, pinterest...) have separate codes available? This is what my client is asking for:

How can i move songs to my playlists using my iphone rather than computer?

How can I move songs to my playlist using my iphone rather than my computer?

@allamb & stephanW
I found this thread via a search, I have a new iphone 5 (also i am completely new to iphone, having been the last few years on android) and i have spent 20 minutes trying to figure out how to add a song to a playlist.
You see i sit a work and listen to dozens of tunes, and i want to add a paticular song to a particular play list, and low and behold I can't, excuse my special characters but "What the f#%k itunes/apple??? - how can this be? Such a commonly needed function and for itunes to be the number music player in the world not to have this feature is ludicrus.
I am lucky that i only have about 500 songs on my iphone thus far, i feel sorry for stephanW with 4000+ !!
Apple - please fix - this is schoolboy programming stuff...

How can I slide detached audio left/right in sample increments, rather than frame increments?

I exported a detached audio file from FCP X to Pro Tools for processing, and I have now imported the processed audio file back into FCP X.
I need to align the processed audio clip with the original audio clip. I am using View --> Zoom to Samples, and can see the amount I need to slide/nudge the processed clip in the Timeline. The problem is that the mis-alignment is smaller than a frame. This sounds small, but it is visually clear when you play the video/audio that the video and audio are not aligned.
Question:
How can I elect to slide the audio left/right in the timeline in increments of the audio samples, rather than in increments of video frames?
Since FCP X allows you to view the audio in Samples, it certainly must somehow let you slide/nudge the audio in Samples........I just haven't found it.

Let's be clear about one thing. There is no way on earth any human being can percieve a one frame discrepancy in sync at a frame rate of 24fps or higher. Going to increments smaller than one frame, while it can be done, makes no difference to the way the media is viewed. Presumably your viewer will not have the benefit of multiple synced waveforms as a guide.
It sounds like you have an alignment problem in ProTools. This should be a incredibly simple to fix in that application.
The problem may laos be one of sample rate difference. What are the specs of your export audio file from FCP and the specs of your imported replacement file coming from ProTools. They should line up exactly if the sample rates are identical.

How do I move multiple clips at once in the project rather than one a time?

I know how to cut and then paste to move one clip within the project to a new place within the project, but how do I move a group all at once rather than one at a time?

This did not help and that did not work. I had already tried that Holding down either the command key does "highlight" multiple items but then you cannot move those items to a new spot.

How import prior Backed-Up Fox Favorities in multiple sub-folders rather than one at a time in Fox 6.0

How do you import prior Backed-Up Fox Favorities. This involved many short-cuts and contained in multiple sub-folders.
How can I import the whole folder library rather than one short-cut at a time from each folder.

The favorites shortcuts were not IE but from Firefox. I had a operating system failure. So, after re-installing the operating system, I then had to re-install all applications anew.
After installing Fox 6.0, the problem is my prior use of folders and sub-folders with many favorites shortcuts in each.
It appears that I will need to start anew with creating a folder system in the new firefox application. Then take all of the favorites shortcuts, individually, out of folders and put them in a file in a row, in an antilog fashion. Then try to get Firefox to accept them in some fashion.
I also do not know how to (1) export IE Favorites (2) in IE (3) to an HTML?
I am just lost.
Ijohn5

How can I store iPhoto files on an external hard drive rather than on the iMac drive

How can I store my iPhoto library on an external hard drive rather than the iMac drive to make my computer faster?

Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

How do I legitimately crop a video to 2.35:1 rather than just artificially do it.

Similar Messages

Maybe you are looking for