How do I licence elements 12, as spaces for sn's not match

How do I licence elements 12, as spaces for sn's does not match with the spaces on the box or in the store receipt, ( only has 6 blocks for 4 numbers each on the Adobe screen whereas the box has 30 numbers) so it always says: wrong serial number.

Hi there,
If I'm not wrong, you are trying to enter the VIN number as the serial number which is not correct. Please locate the Redemption code which is available behind the Box. You will have a Black seal which needs to be removed to locate this code. The code will be alpha-numeric digits and will have 24 digits. You can use the code in the below link to get the serial number:
https://redeem.licenses.adobe.com/getserial
If you are still unable to locate any numbers, then please contact Chat/ Phone support who will assist you further as it is not advised to provide the sensitive information here.
Regards,
Jairaj

Similar Messages

How do you display the capacity/free space for the hard drive......

How do you display the capacity/free space for the hard drive on the desktop, under the hard drive icon.... I have seen this done, but I am not seeing any options to do so.... thanks.

View, Show View Options…, Show item info checkbox.

How do I set aside 1G free space for a game?

Trying to install civ4- how do I set aside 1G free space for a game?

if your son is set as a child under your Family Share settings you should be able to turn on "Ask permission" for purchases. If you do have that on I don't know why it's not prompting him to ask.
Another way to stop in-app-purchases is to set restriction on his iOS device. (Turn off in-app-purchases under General/Restrictions)

How do I change the start/stop time for multiple songs not just one song at a time?

How do I chnage the start/stop time for multiple songs not just one song at a time?

I don't think you can in iTunes.
Multiple editing in Get Info does not offer an option to change start/stop times.

How can I find an app I paid for but is not on ipod now?

how can I find an app I paid for but is not on ipod now?

Download Past Purchases
http://support.apple.com/kb/HT2519
Log into iTunes using the account the Purchase was made with... Click on Buy... and a notice will come up saying you already have it... do you wish to download it again... Click Yes...

How to get the elements out of a for loop simultaneously during the loop execution

Hi,
I am student. I would like to know how to get the counter values outside the For loop parallely while the loop runs rather that getting the finally value outside the For loop. Looking forward for answers.
Thanks,
Athira
Solved!
Go to Solution.

You could use a notifier (since it is a single value) or a reference (with a property node) to a control that gets the value elsewhere in another VI.
If it is within the same VI, you could use a property node (right click > create > property node > value) from the control within the same VI located outside the loop.
If you promiss NOT to abuse the use of Local Variables, you could use that to only write from ONE location within the For Loop to a control outside the loop, similar to the property node mentionned earlier. (Of course, I will be struct by lightening for mentionning that and scolded by other LabVIEW coders for having a change of heart on the use of Locals.... Shivers are already crawling up my spine).
You could use a queue, but that might be an overkill, unless: the count is generated faster than it is being read elsewhere...
As crossrulz mentionned, can you describe what you will be doing with the count? Because synchronizing data (fresh / stale / etc) is very important within LabVIEW as it executes based on dataflow rather than a sequential order.
Hope this helps.
EDIT:
You have not fully provided the answer. We figured that much of your code from your description, but what is reading the value of the count? Is it in a separate loop? If not, it may only deal with the first value, which is likely 0. The proper advice depends on how you process the received data (count).

How do you use Elements 10 as plugin for Lightroom 4

Have been trying to use Elements 10 as plugin for Llightroom 4.2. When I try to use prefences it can not find Elements 10. What am I doing wrong. It only shows videos of Mac not Pc

On a windows system it would better to link to the PhotoshopElementsEditor.exe in
C:\Program Files (x86)\Adobe\Photoshop Elements 10 (64 bit system)
C:\Program Files\Adobe\Photoshop Elements 10 (32 bit system)
In Lightroom: Edit>Preferences>External Editing

While Printing on Second Page the Space for Header is not considered

Dear All
we are using LIPI Line Printer and First page is Printed Correctly but at the time of Printing second page (for another invoice or same invoice second copy) the Space for invoice Header is over written by the Content of the smart form.
In smartform that space for the Invoice Header is left blank.
Please Suggest how to remove the Problem.
Virandra Sharda
9427630630

Hello,
I can't see any relation to DB2 therefore you should ask your question the ABAP Development » Form Printing forum (for any reason I cannot move the thread).
Regards,
Thomas

Just purchased more storage space for iphone6 but not showing?

I just purchased more storage space for my iphone6, 20gb, but my backup storage still shows 5gb? How do I troubleshoot this problem, my credit card info is accurate?

You cannot install more storage space on an iDevice. If you don't have space on the device to download to it, then you need to delete stuff from it. Buying more cloud space does not do a thing for you unless you store to the cloud and remove from the device.

How to avoid output file and error lines when condition does not match

Hi Experts
A customer want to send purchase order files to several vendors and each vendor has their own requirement to content and file format. I have prepared scenarios for each vendor and a template is (conditionally) called when CardCode matches. It works fine, - PO file is generated when CardCode matches, but error lines are written to SAP B1 Control Center each time CardCode does not match the one defined in a scenario (100 or more times per day). Problem is that these error lines does not get automatic deleted. Conditional processing are made in this way:
Result Message in SAP B1 Control Center when CardCode does not match:
I tried to avoid an error line in SAP B1 Control Center when CardCode does not match in this way:
Then no error lines are written to SAP B1 Control Center, but an output file is generated each time (order file when CardCode matches and an empty file when CardCode does not match).
Any suggestions on how to avoid both errors types (error lines in SAP B1 Control Center and empty output files)?
Or - can lines in SAP B1 Control Center be automatic deleted?
Regards
Steen

Hi Steen,
using <b1im_skip> should be the right approach, if you're working with B1 OUTBOUND.
Following extract form the B1i help describes the usage to skip the outbound processing:
1.1 Skipping Outbound Processing
If you do not want to hand over the message to the receiver system, the scenario step can create a special tag that indicates to generic processing in the integration framework to skip the message processing.
Add the following to the final transformation atom (atom0):
<b1im_skip xmlns= ”” info=”my info” msglog=”true” msgout="yes">
If the integration framework skips the message, it puts the message log information to the Filtered section, if the message log is switched on. The result message contains the Message skipped by vBIU logic information.
info
To display an individual message, define it using the info attribute.
msglog
If you want to avoid an entry in the message log, introduce the msglog attribute and set it to false.
msgout
To display the skip information in the Success section of the message log, use the msgout attribute and set it to yes.
In case you don't want any MsgLogEntry in case of a skipped message, please enter the following in final atom0:
<xsl:template name="transform">
<xsl:attribute name="pltype">xml</xsl:attribute>
<xsl:choose>
<xsl:when test="$msg/BOM/BO/Documents/row/CardCode='C20000'">
<xsl:call-template name="transform2"/>
</xsl:when>
<xsl:otherwise>
<b1im_skip info="skipped" msglog="false"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
Best regards
Bastian

How do I get more hard drive space for my Macbook Pro?

I am losing hard drive space and I don't know why? Is something writing or copying on my Macbook Pro?
Thank you...

The Hatter..This may be helpful information. I go to force suit and there is both Safari and "Safari web content not responding in red" and this may
be the problem. I delete files and I get up to 50 to 50 MB and then it goes right back down to zero with no use on my part. I made a mistake by
viewing **** on a CHatterbate site and I think that this may be the problem. How do I get rid of this virus, if that is what is happening> I ran Clam X and
it did not find anything...Thank you, again.

How to calculate the percentage of free space for a table in Oracle

okay, I am a little confused here. I have been searching the web and looking at a lot of documents. What I basically want to find out is this, how do I calculate the difference between the number of bytes a table is using and the total bytes allocated to a table space (going that way to get percent free for a particular table). So I need a byte count of a table and total table space and the percentage difference. I have been looking at the DBA_TABLES DBA_TABLESPACES and DBA_SEGMENTS views. I have tried to calculated the space as num_rows * avg_row_len (if I am wrong, let me know). I have been trying to compare that calculation to the number in DBA_TABLESPACES and DBA_SEGMENTS. I am just looking for the total space allocated to the table space that the table sits in (seem logical right now) to make the percentage value work. Thus I want to be able to track the table as it grows as compated to the table space it sits in to see a value as it changes over time (days, weeks, etc.) each time I run this script I am working on.
Can someone get me straight and help me to find out if I am looking in the right places. Any advice would help.
Edward

You can use a little modified version of dbms_space from Tom, show_space. Have a look,
SQL> create table test222 as select * from all_objects;
Table created.
SQL> delete from test22 where rownum<=100;
delete from test22 where rownum<=100
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> delete from test222 where rownum<=100;
100 rows deleted.
SQL> analyze table test222 compute statistics;
Table analyzed.
SQL> create or replace procedure show_space
2 ( p_segname in varchar2,
3    p_owner   in varchar2 default user,
4    p_type    in varchar2 default 'TABLE',
5    p_partition in varchar2 default NULL )
6 -- this procedure uses authid current user so it can query DBA_*
7 -- views using privileges from a ROLE and so it can be installed
8 -- once per database, instead of once per user that wanted to use it
9 authid current_user
10 as
11      l_free_blks                 number;
12      l_total_blocks              number;
13      l_total_bytes               number;
14      l_unused_blocks             number;
15      l_unused_bytes              number;
16      l_LastUsedExtFileId         number;
17      l_LastUsedExtBlockId        number;
18      l_LAST_USED_BLOCK           number;
19      l_segment_space_mgmt        varchar2(255);
20      l_unformatted_blocks number;
21      l_unformatted_bytes number;
22      l_fs1_blocks number; l_fs1_bytes number;
23      l_fs2_blocks number; l_fs2_bytes number;
24      l_fs3_blocks number; l_fs3_bytes number;
25      l_fs4_blocks number; l_fs4_bytes number;
26      l_full_blocks number; l_full_bytes number;
27
28      -- inline procedure to print out numbers nicely formatted
29      -- with a simple label
30      procedure p( p_label in varchar2, p_num in number )
31      is
32      begin
33          dbms_output.put_line( rpad(p_label,40,'.') ||
34                                to_char(p_num,'999,999,999,999') );
35      end;
36 begin
37     -- this query is executed dynamically in order to allow this procedure
38     -- to be created by a user who has access to DBA_SEGMENTS/TABLESPACES
39     -- via a role as is customary.
40     -- NOTE: at runtime, the invoker MUST have access to these two
41     -- views!
42     -- this query determines if the object is a ASSM object or not
43     begin
44        execute immediate
45            'select ts.segment_space_management
46               from dba_segments seg, dba_tablespaces ts
47              where seg.segment_name      = :p_segname
48                and (:p_partition is null or
49                    seg.partition_name = :p_partition)
50                and seg.owner = :p_owner
51                and seg.tablespace_name = ts.tablespace_name'
52               into l_segment_space_mgmt
53              using p_segname, p_partition, p_partition, p_owner;
54     exception
55         when too_many_rows then
56            dbms_output.put_line
57            ( 'This must be a partitioned table, use p_partition => ');
58            return;
59     end;
60
61
62     -- if the object is in an ASSM tablespace, we must use this API
63     -- call to get space information, else we use the FREE_BLOCKS
64     -- API for the user managed segments
65     if l_segment_space_mgmt = 'AUTO'
66     then
67       dbms_space.space_usage
68       ( p_owner, p_segname, p_type, l_unformatted_blocks,
69         l_unformatted_bytes, l_fs1_blocks, l_fs1_bytes,
70         l_fs2_blocks, l_fs2_bytes, l_fs3_blocks, l_fs3_bytes,
71         l_fs4_blocks, l_fs4_bytes, l_full_blocks, l_full_bytes, p_partition);
72
73       p( 'Unformatted Blocks ', l_unformatted_blocks );
74       p( 'FS1 Blocks (0-25) ', l_fs1_blocks );
75       p( 'FS2 Blocks (25-50) ', l_fs2_blocks );
76       p( 'FS3 Blocks (50-75) ', l_fs3_blocks );
77       p( 'FS4 Blocks (75-100)', l_fs4_blocks );
78       p( 'Full Blocks        ', l_full_blocks );
79    else
80       dbms_space.free_blocks(
81         segment_owner     => p_owner,
82         segment_name      => p_segname,
83         segment_type      => p_type,
84         freelist_group_id => 0,
85         free_blks         => l_free_blks);
86
87       p( 'Free Blocks', l_free_blks );
88    end if;
89
90    -- and then the unused space API call to get the rest of the
91    -- information
92    dbms_space.unused_space
93    ( segment_owner     => p_owner,
94      segment_name      => p_segname,
95      segment_type      => p_type,
96      partition_name    => p_partition,
97      total_blocks      => l_total_blocks,
98      total_bytes       => l_total_bytes,
99      unused_blocks     => l_unused_blocks,
100      unused_bytes      => l_unused_bytes,
101      LAST_USED_EXTENT_FILE_ID => l_LastUsedExtFileId,
102      LAST_USED_EXTENT_BLOCK_ID => l_LastUsedExtBlockId,
103      LAST_USED_BLOCK => l_LAST_USED_BLOCK );
104
105      p( 'Total Blocks', l_total_blocks );
106      p( 'Total Bytes', l_total_bytes );
107      p( 'Total MBytes', trunc(l_total_bytes/1024/1024) );
108      p( 'Unused Blocks', l_unused_blocks );
109      p( 'Unused Bytes', l_unused_bytes );
110      p( 'Last Used Ext FileId', l_LastUsedExtFileId );
111      p( 'Last Used Ext BlockId', l_LastUsedExtBlockId );
112      p( 'Last Used Block', l_LAST_USED_BLOCK );
113 end;
114
115 /
Procedure created.
SQL> desc show_space
PROCEDURE show_space
Argument Name                  Type                    In/Out Default?
P_SEGNAME                      VARCHAR2                IN
P_OWNER                        VARCHAR2                IN     DEFAULT
P_TYPE                         VARCHAR2                IN     DEFAULT
P_PARTITION                    VARCHAR2                IN     DEFAULT
SQL> set serveroutput on
SQL> exec show_space('TEST222','SCOTT');
BEGIN show_space('TEST222','SCOTT'); END;
ERROR at line 1:
ORA-00942: table or view does not exist
ORA-06512: at "SCOTT.SHOW_SPACE", line 44
ORA-06512: at line 1
SQL> conn / as sysdba
Connected.
SQL> grant sysdba to scott;
Grant succeeded.
SQL> conn scott/tiger as sysdba
Connected.
SQL> exec show_space('TEST222','SCOTT');
BEGIN show_space('TEST222','SCOTT'); END;
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00201: identifier 'SHOW_SPACE' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
SQL> exec scott.show_space('TEST222','SCOTT');
PL/SQL procedure successfully completed.
SQL> set serveroutput on
SQL> exec scott.show_space('TEST222','SCOTT');
Unformatted Blocks .....................               0
FS1 Blocks (0-25) .....................               0
FS2 Blocks (25-50) .....................               1
FS3 Blocks (50-75) .....................               0
FS4 Blocks (75-100).....................               1
Full Blocks        .....................             807
Total Blocks............................             896
Total Bytes.............................       7,340,032
Total MBytes............................               7
Unused Blocks...........................              65
Unused Bytes............................         532,480
Last Used Ext FileId....................               4
Last Used Ext BlockId...................           1,289
Last Used Block.........................              63
PL/SQL procedure successfully completed.
SQL>http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:5350053031470
I use this to find the space allocations.
Just read your post again,this is not going to show you the percentage of the free/used space. This is going to be the number of blocks which are free/used. For the growth trend, you can look at (in 10g) Oracle EM. It has added now,Segment Growth Trend report which can show you for each object,comparing to the allocated space to the object,how much space is being used by it.
HTH
Aman....

How to change WBS Element in FI Entry for Asset

Hi all,
I have a scenario where an asset has been capitalized with WBS element 1. After several months we realized that it has to go to WBS element 2.
We update the Asset Master Data with a new WBS Element 2.
Depreciation from this date onwards is posted to WBS Element 2 (this is expected), but in FI the asset acquisition cost is still in WBS element 1.
Does anyone know how to rectify the FI document with correct WBS element i.e WBS Element 2
Any advice would be greatly appreciated
Regards
Pramod Saraswat

Hi Pramod,
In posted document you cant change the WBS element.
In order to post on WBS 2 , you have to reverse the acquisation entry posted on WBS1. Then update correct one in asset master then post acquisation.
Ravi

How Can I stop Elements 7 from searching for a memory file?

Recently, every time I turn on Elements 7 it starts searching for a missing file each time it encounters a photo with a "?" in the corner. I must have pressed a key somewhere to start this function but now I can't get it to stop. I can only continue to another photo if I press cancel while it is searching but I have to do this for each "?" marked picture. Is there any way of cancelling this feature? Thanks in anticipation.

Two solutions:
1. Uncheck the option Edit > Preferences > Files > Automatically Search For And Reconnect Missing Files.
2. Either reconnect the missing files or delete them from the catalog, using the File > Reconnect > All Missing command. See this FAQ for tips on how to use the command:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Quickly_reconnecting_large
Leaving missing files in your catalog doesn't have any benefit.

How to setup PS Elements as default editor for LR4?

Hi all,
I have both PS5 and Elements 10 installed on my computer. Lightroom 4 selected automatically PS5 as my default editor. I am planning to switch completely to Elements 10, so I would prefer to have this program as my default editor. Unfortunately I do not see how to do this. Lightroom only allows me to setup additional editor and this option I am already using for Topaz Fusion Express. So my goal is to replace PS5 with Elements 10 as primary (default) editor. How to achieve this?

the default editor is set by lightroom.
When Photoshop Lightroom starts, it checks to see if Photoshop is installed. If it can't find Photoshop, it checks to see if Photoshop Elements is installed. If it can't find either, Photoshop Lightroom disables the Edit In Photoshop command. The Additional External Editor command is not affected.
If you uninstalled Photoshop CS4 after installing Photoshop CS5, some of the data required to Edit In Photoshop could have been removed. Reinstalling Photoshop CS5 fixes this issue.
On Windows, Photoshop Lightroom checks for the Photoshop.exe or PhotoshopElementsEditor.exe keys in the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\ directory of the registry. These keys provide the file path to the applications.
On Mac OS, Photoshop Lightroom checks for the com.adobe.Photoshop.plist or com.adobe.Photoshop.Elements.plist files in the user's preferences folder. These files provide the file path to the applications, as well as other OS-related information about the applications. The plist files on Mac OS are created the first time applications are started. The files are also created any time the application is started and the files are not present.
however you can have as many editors as you want as presets.
thought... only the two "primary" have a keyboard shortcut.
Lightroom -> Preferences -> External Editing
http://i.imgur.com/N2s9b.jpg

How do I licence elements 12, as spaces for sn's not match

Similar Messages

Maybe you are looking for