How do I link and be able to go to a reference number in the body of the text to the references I am wishing to go to?

Example:
Obstructive sleep apnea (OSA) is associated with increased
reduced slow wave sleep.1
to:
1. Ng AK, Guan C. Impact of obstructive sleep apnea on sleep-wake stage ratio.
Conf Proc IEEE Eng Med Biol Soc 2012;2012:4660-3.
Thank you,
David A Walker, DO

Hi David,
Since your post is in the Standards & Accessibility (tagged PDF) discussion area, I am guessing that your objective is to tag the reference and footnote or endnote to ensure accessibility by assistive technology users. A good practice is to nest the reference number in a Reference tag, and the footnote or endnote in a Note tag, then position the Note as close as practical to the Reference in the tag structure without disrupting the reading order. In this case the tags would look something like this:
<P>
...Obstructive sleep apnea (OSA) is associated with increased reduced slow wave sleep.
...<Reference>
......1
...<Note>
......1. Ng AK, Guan C. Impact of obstructive sleep apnea on sleep-wake stage ratio.
The current version of the Matterhorn Protocol requires the Note tag to have a unique ID in the Object Properties. The ID is not used for anything though, and the requirement will reportedly be removed from future versions.
Hope this helps.
a 'C' student

Similar Messages

  • How to update link and import data of relocated incx file into inca file?

    Subject : <br />how to update link and import data of relocated incx file into inca file.?<br />The incx file was originally part of the inca file and it has been relocated.<br />-------------------<br /><br />Hello All,<br /><br />I am working on InDesignCS2 and InCopyCS2.<br />From indesign I am creating an assignment file as well as incopy files.(.inca and .incx file created through exporing).<br />Now indesign hardcodes the path of the incx files in inca file.So if I put the incx files in different folder then after opening the inca file in InCopy , I am getting the alert stating that " The document doesn't consists of any incopy story" and all the linked story will flag a red question mark icon.<br />So I tried to recreate and update the links.<br />Below is my code for that<br /><br />//code start*****************************<br />//creating kDataLinkHelperBoss<br />InterfacePtr<IDataLinkHelper> dataLinkHelper(static_cast<IDataLinkHelper*><br />(CreateObject2<IDataLinkHelper>(kDataLinkHelperBoss)));<br /><br />/**<br />The newFileToBeLinkedPath is the path of the incx file which is relocated.<br />And it was previously part of the inca file.<br />eg. earlier it was c:\\test.incx now it is d:\\test.incx<br />*/<br />IDFile newIDFileToBeLinked(newFileToBeLinkedPath);<br /><br />//create the datelink<br />IDataLink * dlk = dataLinkHelper->CreateDataLink(newIDFileToBeLinked);<br /><br />NameInfo name;<br />PMString type;<br />uint32 fileType;<br /><br />dlk->GetNameInfo(&name,&type,&fileType);<br /><br />//relink the story     <br />InterfacePtr<ICommand> relinkCmd(CmdUtils::CreateCommand(kRestoreLinkCmdBoss)); <br /><br />InterfacePtr<IRestoreLinkCmdData> relinkCmdData(relinkCmd, IID_IRESTORELINKCMDDATA);<br /><br />relinkCmdData->Set(database, dataLinkUID, &name, &type, fileType, IDataLink::kLinkNormal); <br /><br />ErrorCode err = CmdUtils::ProcessCommand(relinkCmd); <br /><br />//Update the link now                         <br />InterfacePtr<IUpdateLink> updateLink(dataLinkHelper, UseDefaultIID()); <br />UID newLinkUID; <br />err = updateLink->DoUpdateLink(dl, &newLinkUID, kFullUI); <br />//code end*********************<br /><br />I am able to create the proper link.But the data which is there in the incx file is not getting imported in the linked story.But if I modify the newlinked story from the inca file,the incx file will be getting update.(all its previous content will be deleted.)<br />I tried using <br />Utils<IInCopyWorkflow>()->ImportStory()<br /> ,But its import the incx file in xml format.<br /><br />What is the solution of this then?<br />Kindly help me as I am terribly stuck since last few days.<br /><br />Thanks and Regards,<br />Yopangjo

    >
    I can say that anybody with
    no experience could easily do an export/import in
    MSSQLServer 2000.
    Anybody with no experience should not mess up my Oracle Databases !

  • How can I cut and paste from a webpage to a Word document without the document taking me to the web address when I click on a word in the document?

    How can I cut and paste from a webpage to a Word document without the document taking me to the web address when I click on a word in the document?

    You are trying to copy a link, it is most likely in a different color such as the words "Microsoft's own forums" in his post. In Word highlight the word or words, control click on them, select Hyperlink, then Edit Hyperlink, then delete the link from the top box. It will then have a button asking if you want to "Remove Link", click on it.

  • How do I Register and view my one on one now that I bought the card?

    How do I Register and view my one on one now that I bought the card?
    I paid for this service recently, but when I go to the apple store web site, it just indicates my previous account has expired.

    Hello Helpmenowplease1,
    Congratulations on your new One to One membership!  It sounds like you need to register the new membership.  I found an link where you can activate your membership:
    Activate your One to One membership:
    https://onetoone.apple.com/activate
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • How can my wife and I be friends in game center if we use the same Itunes account?

    How can my wife and I be friends in game center if we use the same Itunes account?

    You can set up multiple accounts in Game Centre, sign out and create new account. You just need a different email address from any existing Apple ID's and a new password. You can still use the old account for purchases.

  • How can I install and config Jolt for IIS so that I can call the services advertised by tuxedo?

    How can I install and config Jolt for IIS so that I can call the services advertised
    by tuxedo?

    It appears that you have apps that need updating that were pruchased from more than one account
    - Go to settings>Store and sign out and sign into your account.
    - Apps are locked to the account that purchased them.
    - To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

  • I have a MacBook Pro and I opened an email, clicked on the link and then realized it may have not been sent by the person it appeared to have come from, what can I do to ensure there are no problems?

    I have a MacBook Pro and I opened an email, clicked on the link and then realized it may have not been sent by the person it appeared to have come from, what can I do to ensure there are no problems?

    Delete the cookie and cache of any website you visited that you are uncertain about.    That's in your browser preferences.  What Mac operating system and browser are we talking about?
    Did you attempt to download any software from the website, or just visit the link on the e-mail?   Or did you attempt to open an attachment on the e-mail?

  • How do i download and install creative suite 6 with a serial number?

    how do i download and install creative suite 6 with a serial number?

    Download and Installation Help -
    https://helpx.adobe.com/download-install.html
    CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  • I just purchased LR5 online and installed it on my PC. I entered the serial number I was given and it said "this is an upgrade serial number. The serial number from your previous version of LR is also required." Since I just bought it I don't have a previ

    I just purchased LR5 online and installed it on my PC. I entered the serial number I was given and it said "this is an upgrade serial number. The serial number from your previous version of LR is also required." Since I just bought it I don't have a previous serial number. What do I enter?

    You return the upgrade version since it was purchased in error
    Return, cancel, or exchange an Adobe order
    Purchase a full version.

  • How to hide links and tab

    Hi All,
    I am working on SAP Sourcing 7.0. There are few changes I am trying to do in my system. They are:-
    1>I am trying to hide Xpress tab from the top navigation. I went to the Setup->Workbench page. I have seen XPress is Default Buy-Side Template for XPrress Tab and Enable to hide check box is disabled. I tried to edit the page but no success.
    I am able to add new page and able to hide. Pl let me know we can hide Xpress tab or not.
    2>I am trying to hide Reference guide, setup, about and help links. I am able to hide Reference guide link via making changes in the security profile. But rest of the link I am not able to do. Pl let me know if itu2019s possible or not.
    Deepak!!!

    Hi Mudit,
    Thanks for reply.I was able to hide XPress via hit and trail, once again thanks for input.But this changes are reflecting globally. Is there any way for hiding these links for specific user..?
    1>I have observered in the security profile's Access right dropdown System option is available, Once i select, i can see different permission options and setup is among the one of them. What I am thinking I can restrict the user permission at this lavel, if I am not able to hide setup link.
    2>One thing i want to share and need you input. I have found below option inside the System Navigation Tabset (Buyside)
    Toolbar Container: System Navigation Tabset (Buyside) for  help, RG, about, help link under Gray Navigation Group.
    ToolbarID I have created are:-
    Help:-eso.system.toolbar.navigation.grayBarGroup.help
    Setup:-eso.system.toolbar.navigation.grayBarGroup.srm_toplink_setup
    Reference Guide:-eso.system.toolbar.navigation.grayBarGroup.refguide
    About:-eso.system.toolbar.navigation.grayBarGroup.srm_toplink_about......please confirm above toolbarIds.
    The mazor issue I faced was if I use wrong toolbar id, system starts throwing Oracle error after clicking setup link and all tabs are not visible.
    I faced such error yesterday when i was trying for hiding XPress. At this situation how to solve error. I know via giving correct toolID value system will start working fine and i have done the same...:), but is there any other way of resume the system to original state.
    Deepak!!!

  • I click on a link and it goes there in Firefox but it doesnt put the browser on top of what I am doing. How do i fix this?

    I click on a link and it goes there in Firefox but it doesn't put the browser on top of what I am doing. It used to do that, how can I make it go back to doing that?

    I am using Robo Form like I have for years and when I click on a website to open it goes there and puts in the username and password and opens in a new tab but Robo Form stays on top and Firefox is underneath it and it used to automatically go to Firefox and put it on top and now it doesnt do that anymore.

  • How to create report and print able pages in 10.1.3.1 ?

    hi
    thank you for reading my post
    how i can create a print able page in jdeveloper ?
    indeed i need to make some reports in my web application , then users should be able to print those files.
    does any one has some experience with report generation and Jdeveloper ?
    any tutorial / tip or sample could be very usefull.
    thanks

    PDF, Excel, HTML reports may be generated in JDeveloper by:
    1. Integrating JasperReports in JDeveloper.
    JasperReports and Jdeveloper
    http://technology.amis.nl/blog/index.php?p=346
    http://jasperreports.sourceforge.net/
    2. Integrating XML Publisher in JDeveloper.
    Re: Oracle's XML Publisher in JDeveloper and XSQL Servlet
    3. PDF Reports may be generated with XSQL.
    http://technology.amis.nl/blog/?p=1182

  • How to create links and how to use that links to go to other pages?

    my question is....how to create links...i mean by using make link option.....when we do right click on a word,etc in the design view.....and my other question is.....how to use that links to go to other pages.....i mean when i click on a link...it takes me to another web page.....

    Please do not post the same subject to more than one forum.

  • How to add links and rollovers from an exported Edge Reflow HTML in Dreamweaver?

    Hi,
    Thanks to the very helpful community I have found the way to get my HTML file from Edge Reflow.
    Upon opening the HTML file in Dreamweaver, the CSS, Java scripts are wonderfully linked. However, I am not experienced enought to manipulate the divs to get a rollover or add links to the layout.
    Eg. Sticky Navigation bar on the top, how do you add rollovers and links?
    All help is very much appreciated.
    Thank you for your help in advance!

    Hi Chris,
    your plan for Reflow sounds good. Versioning is probably the most adaptable way to integrate it with the rest of the workflow.
    What I think is still missing, on the simple side, is link creation and management inside Reflow.
    Of course, considering you have just introduced multiple pages, this feature shouldn't be far...
    About Dreamweaver, I've been a faithful user for years but now it's definitely old for some uses.
    Just to say, if I open the responsive page I just created in Reflow with DWCC in Live View, something basic as background gradients are completely missing. Well, I'm not going to use it for this kind of work.
    Do you know for what DW is still a great tool? Email Newsletters, since they still have to respect old standards that no one else uses anymore.
    For all the rest I definitely prefer the editor/IDE way: SublimeText and other tools.
    They're faster, more apt to the task and, similarly to the Adobe Edge line of products, made with the same technologies they help to work with.
    In the future, who knows... Maybe, you should put in development a "Dreamweaver Edge" version and drop the old one, a little clunky even if recently revarnished  ;-)

  • How to hide link and full screen view in Safari?

    Hi All,
    I am demonstrating a product on the web i want to hide the link and have a full screen view in safari.
    Thanks

    “hide the link” meaning “hide the address bar”.

Maybe you are looking for

  • "transaction variant" functionality in the Web Client

    I'm opening this message for a customer this message is a consulting... Thanks in advance, Daniel Kaoro Kobashigawa In the SAP GUI we have Transactions that use transaction variants. For example we have ZBUP1A that is based upon BUP1. It uses a trans

  • WIFI not working when WEB is running and using NMA...

    hello, If you load up a web page with the N95 8GB and then hold the menu button to switch to standby then goto Nokia Maps, the Nokia Maps can not make an Internet connection even though there is one available via the Web. Anyone else can confirm this

  • How can I clean my computer to free up space?

    Trying to back up my phone on my computer (because I don't have enough space on iCloud) and my computer doesn't have enough free space either.  I have deleted several documents, downloads, duplicate pictures and videos, etc.  Anything else that I can

  • HT1933 Never got an email about purchasing a movie on iTunes, but got billed twice on two different bank accounts. How do I get refunded?

    I have two different bank accounts and I still had my old on in my itunes when going to purchase the movie. Said the account was then not the right information...reposted my new bank account information that I wanted to get billed and it charged me o

  • How to stop iphoto opening.

    Hi Everyone, How do I stop iphoto opening every time I put a card in my card reader. I use Photo Elements and it is a nuisance having to quit iphoto each time. I have removed it from the dock but it still opens. I am new to Panther and iphoto so I am