How do I listen to my guitar while recording through my computer speakers?

Lost all of my audio settings when I upgraded to LION. Now I cannot hear my guitar while recording in GB. I can hear the audio during playback, but not while recording. I have a simple guitar USB cable.

anorakman wrote:
I cannot hear my guitar while recording [...] I have a simple guitar USB cable.
http://www.bulletsandbones.com/GB/GBFAQ.html#usecomputersspeakers
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

  • I want to record my voice over a karoke track, how do I listen to the song while recording my voice simultaneously?

    I want to record my voice over a karoke track, how do I listen to the song while recording my voice simultaneously?

    What's your setup? Normally you hear all  tracks (that are not muted) in your headphones while you record a new one.

  • Listening the guitar while recording

    Hi! I'm using GarageBand '09.
    Is it possible to listen to the guitar while recording it?
    And if it's possible, can I listen it with the effects I choose?
    Thanks!

    axelbrz wrote:
    Is it possible to listen to the guitar while recording it?
    http://www.bulletsandbones.com/GB/GBFAQ.html#monitoron
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    And if it's possible, can I listen it with the effects I choose?
    yes

  • How do i listen to my friend's ipod on my computer?

    Hey there guys,
    my friend and I swapped ipods so that we can check out each other's music. I'd rather play music through my computer speakers than headphone while at home. My question is, how do I listen to music from her ipod on my PC without accidentally wiping all her music?
    I found http://support.apple.com/kb/HT1202 describing Manual Mode, is that what I want to use? I want to be absolutely sure I'm not going to wipe it.
    Thanks!

    If you want to connect and use an iPod on more than one computer or with more than one library you need to change the update preference in the iPod Summary tab to "Manually manage music and videos". The content of iTunes and the iPod are not syncronised in this mode so the two can be different. You can directly access the content of the iPod and play it through iTunes.
    Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device: Safely Disconnect IPod
    If the iPod is currently set to sync automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all the songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from the iPod.
    You can also use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on Windows with iTunes installed hold down the Shift + Ctrl keys together. This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer. Once you are safely connected you can change the iPod to manual: iTunes - Keyboard Shortcuts for Windows

  • They need to make it so you can listen to your music while recording a video

    They need to make it so you can listen to your music while recording a video

    So tell Apple instead of posting in a user to user technical support forum.
    http://www.apple.com/feedback

  • I have a Honday FIT 2013 with the USB for iPod and the Auxillary jack. I plan to purchase an iPhone 5c. Can I listen to music from my iPhone through my car speakers?

    I have a Honday FIT 2013 with the USB for iPod and the Auxillary jack. I plan to purchase an iPhone 5c. Can I listen to music from my iPhone through my car speakers?

    Click the "Upgrade Eligibility" link on the right side (under "Learn more about buying iPhone) here:
    http://store.apple.com/us/buy-iphone/iphone5s
    If you're not eligible for upgrade, it will tell you how much more than US$199 you will be charged.

  • Some fields are missing while recording through shdb

    Dear Abapers,
                   I am doing bdc for F-27 t.code.Some fields,cobl-gsber(business area),cobl-kostl(Cost center) are missing while recording through SHDB.But when do it manualy the fields are displaying.Also i have ddded those fields manualy in the program,stll the fields are not getting captured.May anyone pls help me,why this problem is happening?What is the solution for this.
    Thanks in Advance.

    hi
    i can tell u that few transactions wont suffice us with BDC,so for such transactions we do bdc with similar kind of transactions.
    ie., The transactions FB60 and f-63 both are meant for Parking.
    But we cant do bdc for FB60 Parking. So we do bdc for f-63.
    similarly when we do bdc for vendor few fields wont appear...in that case, we use bapi for it....
    So try to find an appropriate bapi or similar tcode which will suffice ur need
    hope its clear.
    Regards
    Sajid

  • HT204370 how do i get the movie sound to play through the TV speakers, It is connected to my mac bookpro but the sound only comes through my macbook pro

    how do i get the movie sound to play through the TV speakers when watching a movie from Itunes, It is connected to my macbook pro but the sound only comes through my macbook pro.
    Thanks

    Transfer the movie from your iPad to your MacBook then. =)
    iOS: How to transfer or sync content to your computer
    http://support.apple.com/kb/HT1296

  • How can I add effects to voice while recording

    Hey
                  Ok logic pros and users   heres and important question ....     I have my vocalist comming over and he likes a bit of effect on his voice that gives him the sound like it would be recorded  I recorded him last time on a tascam mk-2  with effects like reverb and some guitar effects which really enhanced his voice.  He s using a compression mic  so i do have to watch passing gas while hes recording because it will pick it up lol
                  What can I do on the audo track while setting up his voice to enhance his singing to the point that it will sound extremely good and not bland ..    What I am trying to say he sounds like jeff tate  and I want a tate voice like the album while hes recording i gives him an uplift and higher range
                                                                      Thanks

    well, it should go without saying... there's no magic bullet here. Either someone can sing or they can't. The first step to them sounding good is their own ability.
    Beyond that, a good quality microphone into a decent mic pre-amp is important.
    Ok, so, after stating the obvious... (which I'm amazed at how many people STILL think software will make them a good musician....)
    For monitoring, you could start with any channel strip setting in the vocal category. Most will be over the top, in terms of what you need, but it'll get you started. You'll have to watch latency though. Depending on your audio interface, and how well the drivers were written, will determine if there's noticeable delay in the singers headphones. But a little reverb or delay inserted right on the channel strip will let him hear the FX as he sings.
    If you want to actually print these FX to tape, you will need to record through an input object.

  • How can I turn off my screen while recording video?

    Hey...I would like to know how can I keep an ongoing video recording while turning off my computer's display?

    Energy Saver, you can keep the computer awake while the screen saver shuts the monitor off but I'm not sure that would do it for you.

  • How do you switch to front camera while recording video?

    I have the iphone 5s and while I'm recording a video, I can't figure out how to switch back and worth between front and back camera. I know how to do it while not recording but I want to switch the camera as it's actually recording, is that possible?

    I don't claim to know the details of each one of the hundreds of thousands (or perhaps millions) of apps out there in the App Store.
    But I can tell you with all due respect if I were writing software for the iPhone / iPad, I would never consider such a product (that switches cameras while recording), because in my humble opinion, there would be very small if any demand for such a product.

  • How to watch a live broadcast show while recording two other shows

    If you have a TV with a QAM tuner built in and you use a splitter to connect the cable to the cable/antenna input of your TV while leaving a connection to the DVR, you will be able to watch a broadcast show live while recording two other shows on your DVR.  I tried this and it worked, but the channels I had access to (that seemed to be ones I was interested in) were basically the broadcast channels (in my area 3.1, 6.1, 10.1, 12.1, etc.).  Obviously you don't have access to the other features such as on demand, but it's handy to be able to handle three shows at the same time as long as one is on one of the channels available with the direct connection to your TV.
    Of course, this also provides a way to avoid the cost of additional set top boxes as long as you don't need access to the additional channels features like on demand.
    Bob S.

    OR if you're tv's older and doesn't have the qam tuner, you can hook up a HD antenna for 30 dollars, and if you live in an area that gets reasonable reception, you'll get something similiar to what you describe.
    both are good solutions.

  • How to view score of one track while recording another.

    I want to record audio on one track. I want to read the notes and chords from another track while recording. ( I want to use the previously recorded track only for providing me with the score ) I would very much prefer to have Logic chase the score so that I know where I am in the arrangement while recording.
    I am aware I can print out the score as a a pdf file and view that, and its not so bad, however I would prefer Logic to follow along the score and let the playhead indicate the location.
    I can do this when not recording. I can view the previous track just before I go into recording, but when I go into recording, the score switches to showing currently track being recorded ( which is empty)

    Hi there,
    Floating Windows all but disappeared with Logic 8 and many of us mourn their passing. Although some windows are, by default, floating (eg transport), the only one that you can choose to make float nowadays is the Environment, useful if you're setting up faders or some other real-time control.
    Pete

  • How do I set upmy Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.

    how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.  From systems Preferences I must select one or the other.  I want both to work all the time.

    Hi,
    I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
    1. DS: 0FI_AP_4  replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
    2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
    3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
    4. Load the same to a InfoCube (0FIAP_C03).
    Hope this helps.
    Thanks.
    Nazeer

  • Difference in value while recording through SHDB

    hi guys,
    well i want to know why there is difference when i do recording. I am using the transaction 'VD01'
    while  recording i get
    perform bdc_field       using 'BDC_CURSOR'
                                  'ADDR1_DATA-TRANSPZONE'.
    perform bdc_field       using 'ADDR1_DATA-NAME1'
                                  record-NAME1_004.
    perform bdc_field       using 'ADDR1_DATA-SORT1'
                                  record-SORT1_005.
    perform bdc_field       using 'ADDR1_DATA-STREET'
                                  record-STREET_006.
    perform bdc_field       using 'ADDR1_DATA-COUNTRY'
                                  record-COUNTRY_007.
    perform bdc_field       using 'ADDR1_DATA-TRANSPZONE'
                                  record-TRANSPZONE_008.
    perform bdc_field       using 'ADDR1_DATA-LANGU'
                                  record-LANGU_009.
    but the example which i am practicing there it is
    PERFORM bdc_field       USING 'KNA1-NAME1'
                                      lw_customer-name1.       "Name.
        PERFORM bdc_field       USING 'KNA1-SORTL'
                                      lw_customer-sortl.       "Search Term.
        PERFORM bdc_field       USING 'KNA1-ORT01'
                                      lw_customer-ort01.       "City.
        PERFORM bdc_field       USING 'KNA1-LAND1'
                                      lw_customer-land1.       "Country.
        PERFORM bdc_field       USING 'KNA1-SPRAS'
                                      lw_customer-spras.       "Language.
        PERFORM bdc_field       USING 'KNA1-PSTLZ'
                                      lw_customer-pstlz.       "Postol Code.
        PERFORM bdc_dynpro      USING 'SAPMF02D' '0120'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'KNA1-LZONE'.
    well i just want to know why do i get 'ADDR1_DATA-NAME1' but in example it is 'KNA1-NAME1' and so on to other fields.
    kindly let me know what  is happening here

    Hi,
    When you record the transaction VD01 in the initial screen a check box is there for central address managament.
    If you check that box different screen will be called for the adress management, so the structures used in the screen is different.
    Uncheck the check box "Use central address management" while recording you will get what you are expecting.
    Regards
    Praveen

Maybe you are looking for

  • Why is my Macbook Pro so slow when I run VM Ware Fusion?

    My Macbook Pro is very slow when doing normal tasks (Mail especially) and slows to a stop when trying to run VM Ware Fusion. I need to run this to run a work program and that is the only thing that I do with Fusion. Everything seems to come to a halt

  • Error using the distiller in Acrobat Professional 8 to create a PDF from an Aspose.Words .doc docume

    Hi, We use Aspose.Words to create Microsoft Word (.doc) documents from one of our Intranet applications. These documents are then further modified in Microsoft Word and are then converted to PDF files using the distiller in Acrobat 8 Professional. Th

  • Why Does Replication requires db restart to get transactions through

    I am having problems with the deferred tranasactions. There were about 44,000 in the queue before. The dbms job was broken so I ran it and it was able to push half the tranactions from the 44,000 through. However, only half. I am manually pushing the

  • Apple TV 2G plug power supply but no led signal?

    MY Apple TV 2G maybe is  broken. This is the situation. When only Plug-in Micro-USB then LED's signal is flash quickly. When only Plug-in Power Supply then LED's signal is nothing. And i have done everything i can do . Recover, Recover and Recover...

  • 3.5mm to 2.5mm adapter for E71

    Hi I am at wits end with fnding a dongle type adapter for music. 2 ring, 3 ring.. I bought a 90 degree 2 ring adapter from Tandy that did not work. I may need a 3 ring type. Is there a  3 ring type 90 degree adapter with a short wire (like a dongle)