How do I load photo's from a mac running OS X10.4 to my IPad 3?

How do I load photo's from my Mac running OS X 10.4 to my IPad 3?

Get an SD card, an SD card reader for your mac, and get the SD card reader adapter (camera connection kit) for the iPad. You can then upload your photos from the Mac to the SD card using the card reader. Then plug in the SD card reader adapter for the iPad and stick your SD card into it. You can then upload the photos to your iPad.
You want a camera connection kit (for ipad); you can get it on the apple store.

Similar Messages

  • How do i copy photo's from my mac to my iPad

    how do i copy photo's from my mac to my iPad

    With the iPad connected to and selected on the left-hand side of your computer's iTunes, on the right-hand side there should be a series of tabs on which you can specify the content that you want to sync to the iPad - one of those tabs should be Photos : http://support.apple.com/kb/HT4236

  • How do i load selected pics from my mac to my ipod touch?, How do i load selected pics from my mac to my ipod touch?

    How do i load selected pics from my Macpro to my ipod touch?

    You really need to read the manual.
    Open itunes, connect ipod, go to photos tab, select what you want, sync.
    iPod touch User Guide (For iOS 5.0 Software)

  • How can I load photos back from iPhoto to my iPhone?

    I had an iPhone 5s that had 64GB of storage.  I had a lot of music and photos on it.  So much so, that I maxed out the storage capacity.  My only solution was to remove something.  So I decided to offload some of my old photos.  I used iPhoto to move some of my older photos to my laptop in order to free up space on my iPhone.  Since then however, I have purchased an iPhone 6 (128GB) and storage is not as much of an issue.  My question is... How can I add my photos back to my iPhone in the same order that they were before I offloaded them to my laptop?  When I have tried to get the photos back on my iPhone, they are added as new photos with today's date and they do not sort correctly.

    Hello PMorrisJr,
    Thanks for using Apple Support Communities.
    From your post I understand that you have imported photos from your previous iPhone into iPhoto, and now you would like to sync them back in the order they were taken to your new iPhone.  Regardless if you are syncing albums, events or the entire iPhoto Library, the photos do sync over with the same photo date that appears in iPhoto.
    iTunes: Syncing photos - Apple Support
    Have a great weekend,
    Alex H.

  • HT201317 I have Icloud and photo's from Iphone go over How can I send photo's from my PC to the Icloud on my Ipad

    I don't know how to send my pictures from my PC to Icloud?

    Hello, subutler44.
    Thank you for the question.  Once you have installed the iCloud Control Panel for Windows, you enable Photo Stream.  This will add a folder called Photo Stream Uploads in My Pictures or Pictures.  From there, you will drag and drop photos that you would like in Photo Stream to the Uploads folder. 
    iCloud: Add photos to Photo Stream manually
    http://support.apple.com/kb/PH2606
    The article below will go over how to setup Photo Stream.  See the section labeled On a Windows computer. 
    iCloud: Set up Photo Stream
    http://support.apple.com/kb/ph2605
    Cheers,
    Jason H. 

  • How can i Read a book from my Mac (digital editions) to my iPad 2

    How can i Read a book from my Mac (in digital editions) to my iPad 2

    iPad's aren't supported by ADE.  Some folks have been able to use iTunes to
    do the transfers, and others have used Bluefire reader.
    ===================

  • How do I load photos & Music to my iPhone 3G from iPhoto /iTunes?

    How do I load photos & Music to my iPhone 3G from iPhoto /iTunes?
    If I want to use photos as wallpaper on the phone do they have to be resized or can I just load them?

    With your iphone plugged into itunes go to the tables for music, photos, etc and set to sync with the album,playlist you want.
    Sounds like you might need to read the owners manual:
    http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

  • I have hierarchy data in R/3 side how will i load that data from R/3 to BW

    Hi all,
    i have my hierarchy data in the R/3 side how will i load that data from  R/3 to BW side
    Regard
    Kiran Kumar

    Hi Kiran,
    Here is the procedure:
    1.      In the Data Warehousing Workbench under Modeling, select the InfoSource tree.
    2.      Select the InfoSource (with direct update) for the InfoObject, to which you want to load the hierarchy.
    3.      Choose Additional Functions® Create Transfer Rules from the context menu of the hierarchy table object for the InfoObject. The Assign Source System dialog box appears.
    4.      Select the source system from which the hierarchy is to be loaded. The InfoSource maintenance screen appears.
    ○       If the DataSource only supports the transfer method IDoc, then only the transfer structure is displayed (tab page DataSource/Transfer Structure).
    ○       If the DataSource also supports transfer method PSA, you can maintain the transfer rules (tab page Transfer Rules).
    If it is possible and useful, we recommend that you use the transfer method PSA and set the indicator Expand Leaf Values and Node InfoObjects. You can then also load hierarchies with characteristics whose node name has a length >32.
    5.      Save your entries and go back. The InfoSource tree for the Data Warehousing Workbench is displayed.
    6.      Choose Create InfoPackage from the context menu (see Maintaining InfoPackages). The Create InfoPackage dialog box appears.
    7.      Enter the description for the InfoPackage. Select the DataSource (data element Hierarchies) that you require and confirm your entries.
    8.      On the Tab Page: Hierarchy Selection, select the hierarchy that you want to load into your BI system.
    Specify if the hierarchy should be automatically activated after loading or be marked for activation.
    Select an update method (Full Update, Insert Subtree, Update Subtree).
    If you want to load a hierarchy from an external system with BAPI functionality, make BAPI-specific restrictions, if necessary.
    9.      If you want to load a hierarchy from a flat file, maintain the tab page: external data.
    10.      Maintain the tab page: processing.
    11.      Maintain the tab page: updating.
    12.      To schedule the InfoPackage, you have the following options:
    ○       (Manually) in the scheduler, see Scheduling InfoPackages
    ○       (Automatically) using a process chain (see Loading Hierarchies Using a Process Chain)
    When you upload hierarchies, the system carries out a consistency check, making sure that the hierarchy structure is correct. Error messages are logged in the Monitor. You can get technical details about the error and how to correct it in the long text for the respective message.
    For more info visit this help pages on SAP Help:
    http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6729e07211d2acb80000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/3d/320e3d89195c59e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6729e07211d2acb80000e829fbfe/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4dae0795-0501-0010-cc96-fe3a9e8959dc
    Cheers,
    Habeeb

  • How do I transfer photos/videos from my Iphone 5 to my Macbook Air. I can do so with my Iphone 4s but not with my Iphone 5

    How do I transfer photos/videos from my Iphone 5 to my Macbook Air. I can do so using my Iphone 4s but not with my Iphone 5

    See this User Hint: https://discussions.apple.com/docs/DOC-3141

  • How do I delete photo ALBUMS from my iPHONE 4? I sync via icloud and I can not see any folders selected in itunes. I searched the internet and basically there is no one who has the answer to how you delete the iphone photo library and misc albums

    how do I delete photo ALBUMS from my iPHONE 4?
    I sync via icloud and I can not see any folders selected in itunes.
    I searched the internet and basically there is no one who has the answer (so far)
    to how you delete the iphone photo library and misc albums
    I have also had every iphone and I am not stupid.
    charles altman

    Replying to my own post - heh. I downloaded iExplorer (http://www.macroplant.com/iexplorer/) which allowed me access to the files on the phone and there was the phantom movie in the DCIM folder. Deleted it, and all is well - although I still have 0.65gb of Other in iTunes.....

  • HT201317 How can I remove Photo Stream from my PC?

    How can I remove Photo Stream from my PC?

    Go to the iCloud control panel for windows (Start>Control Panel, search for "iCloud", double-click the iCloud icon), then uncheck Photo Stream.

  • HT204053 how do i remove photo's from my icloud account

    how do i remove photo's from my icloud account

    If you mean from photo stream, open your My Photo Stream album, tap Edit, tap all the photos you want to delete, tap Delete.  This deletes them from photo stream and from any devices syncing with your photo stream.
    If you want to delete them all, you can go to icloud.com, sign into your iCloud account, click on your name at the top, click on Advanced, then tap Reset Photo Stream.

  • How do I move photo files from computer to ipad 3?  Sync is dimmed.

    How do I move photo files from computer to ipad 3?  Sync is dimmed.

    Could this be what you are experiencing?
    http://ipadhelp.com/ipad-help/sync-apply-buttons-grayed-out-in-itunes-over-capac ity/

  • How can i load a VI from LABVIEW ver 6.0.1b3 to LABVIEW ver 6.1

    How can i load a VI from LABVIEW ver 6.0.1b3 to LABVIEW ver 6.1......I want to load a vi but i'm getting this error:
    LabVIEW load error code 9:VI version (6.1) is newer than LabVIEW version (6.0.1b3)
    My LabVIEW ver is 6.1
    Please help ......it's important
    Thanks

    I am having similar issues with a *.exe from LV6.1.  I have the runtime engine for 6.1 and recently upgraded to 8.2 from 7.1.  I've never had 6.1 on my machine.  I am able to install this executible and runtime engine on a machine with 7.1 and can run the *.exe fine. 
    I get a load error and am not sure why.  I have had similar issues with old VI's that I have written in 7.1 executing on this machine w/ 8.2
    any suggestions.
    Attachments:
    error.zip ‏14 KB

  • How do I load a movie from my iTunes library to my ipad?

    How do I load a video from my iTunes library on my desktop to my iPad

    Sync the movie with iTunes.
    Connect the iPad to the computer, launch iTunes, Select your iPad on the left side. Click on the Movies Pane in iTunes on the right. Click on the movie that you want to sync. Make sure that the Sync Movies headings is selected as well. Click on Sync - or Apply - in the lower right corner of iTunes.

Maybe you are looking for

  • I need my apps, and music back. How do I get it

    I need my Apps, and music back. How do I get them back? I backed them up with ICloud and skipped the get your stuff process.. I need help. I can't restore my iPad again.. Or I'll forget my internet password.

  • Will a US layout keyboard cover fit on a Japanese Macbook Air 13"

    I'd like to buy a Macbook Air in Japan, however prefer the US key layout. E.g. @ sign should be at 2. Does the Japan version have different size keys/layout? If so I guess a US keyboard cover wont fit

  • Planning function and planning sequence of Design studio new features!!

    Hi Experts Recently I have updated my design studio to 1.3 and happy to see many new updates. Meanwhile i saw some new features add planning function and planning sequence. As per my understanding, Using this features we can enter data at run time. M

  • ADFLibs in Fusion Web App - Jdev 11.1.2.3 on redhat 5.8

    Hello: Say I create a ADF Fusion Web app called APP_LIB. This app has EO, VO, AM in the model project and has Pages, Fragments and Taskflows in the ViewController. I want to create an ADF Lib from APP_LIB, so I create a ADF Lib deployment profile on

  • Manipulating mxml tags (view) in Cairngorm.

    i have a cairngorm based app that consists of a tabnavigator with 8 tabs. i need to set the visibility of tabs through app initialization as well as through user gestures. what's the best way to accomplish this? i have a function that toggles tabs as