How do I locate my aperture serial number?

After installing Aperture 3 following a hard drive failure I can't remember where the serial number is located on the packaging. Anyone know?

I know this doesn't help in your current situation, but it's a good practice. I keep a text file with all the serial numbers for all my software, and I type every one of them twice to make sure I have them typed in correctly.  I can pull up the serial number from Aperture 1.1 or Photoshop CS1. This is important because some vendors want your "legacy" serial number when you upgrade.  While I doubt that Adobe will ask for my CS1 serial at this point, I can show proof of ownership dating back to 2000 if there is ever a question.  Of course, this file has multiple backups.
DLS

Similar Messages

  • How can I change an Aperture serial number?

    I loaded Aperture on a second machine and to be able to run both at the same time I need a second license. No problem there, especially with the price drop. However, how or where do I enter the newly purchased serial number?
    Thanks, Peter

    I own Logic Studio and have already had it loaded but changed the drive for a bigger drive and have to reload it. I have registered the software before and now that i have to load it again, can't find the serial number card or book or whatever came with it. Is there a way to retrieve a serial number from Apple? I don't find a link to do that...
    -Tony

  • How do I locate my PSE serial number on the box? [was:Serial]

    I am trying to upload my elements to my laptop verses desk top & can not locate which # is my serial # on my box. Please help!!!

    Try http://helpx.adobe.com/x-productkb/global/find-serial-number.html

  • Asked for Aperture serial number every single time

    After re-installing Aperture on a new hard disk (the old one failed), I was asked for Aperture serial number every time I open the software.  How can I stop it? (iMac 2009, OSX Mountain Lion 10.8.2, Aperture 3.4.1)

    You may have a corrupted "ProAppSystemID" file or Aperture cannot write to the System Library.
    To stop Aperture asking for the serial number, first check, if you still have an old file "ProAppSystemID" in your System Library.
    Quit Aperture.
    Go to your MacintoshHD and open the folder "Library", then "Application Support", then "ProApps".
    Remove the File "ProAppsSystemID" to the Desktop, if it exist and restart Aperture.
    Reenter your serial number, hopefully for the last time.
    Sometimes Aperture writes this file to a temporary directory, when it cannot write to the Library. If the above does not work, look at the temporary directory /tmp
    Use the Finder's "Go" menu
         Go > Got to folder    and  enter /tmp into the textfield. If you see the file there, move it to its proper location.
    In this case you may want to repair the permissions on your system drive; you can do this using the "First Aid" tools in "Disk Utility" (located in Applications > Utilities)
    Regards
    Léonie

  • I need to install photoshop cs4 extended from a disk to a new computer because my old computer had a hard drive crash. There is no serial number on the back of the case.  How can I obtain a usable serial number?

    I have to install Photoshop CS4 extended on a new computer from a disk because my old computer had a hard drive crash.  There is no serial number on the back of the case.  How can I obtain a usable serial number?

    Find your serial number quickly
    You can activate software without following up and registering it... at least that was the case in the past.  The serial number is normally located on the disc case or a box inside the main box.  If you did not purchase the disc from Adobe then it is possible you would have dealt with a redemption code, in which case it would have been up to you to keep a record of the serial number, especially if you did not follow up and register the software.

  • How to change the status of Serial number

    Hi Experts,
    Would you please help in solving this problem.
    How to change the status of Serial number?
    I have material stock in a storage location: recieved from Intercompany through outbound delivery, when PGIed material document is created when I am checking the serial numbers of the recieved ones status of the serial numbers are ESTO, I want that into AVLB.
    How can we do that?
    Regards
    Sri

    Hi,
    Go to IQ02 on Header tool bar you will find edit(2nd option on header tool bar) => edit manually=> Click from Customer=> and then to Stock you will find the expected results...
    Generally Serial number Status use to change along with the movement of material linked with that serial number... So if you are changing serial number with manual trasaction then please remove all the details from IQ02 like plant storage location Batch and master batch so that i will not provide you error while doing next transactions.
    Regards,
    Ninad Kshirsagar

  • Aperture serial number does not work

    I just got a Mac Book Air, my Aperture Serial number does not work. it tells me it is not correct. How can I use my software now?

    First how did you purchase Aperture and how did you install it on the Air? As the Air does not have a DVD drive it would help to know how you got the app onto it.
    Start with Troubleshooting Professional Application Serial Numbers and see if that helps.
    There is also Pro Application Replacement Serial Numbers if you're not able to get your serial number working.

  • My computer was stolen, how can I track down a serial number?

    Hi All-
    I'm in need of some assistance.  My Mac was stolen during an apartment burglary.  It was a gift from a family member who doesn't have any type of receipt.  I apparently didn't register my Mac either, my iPad and iPod yes, my stolen laptop of course not.  My insurance company is requesting the serial number or some sort of proof of ownership.  Any ideas how I can track down the serial number? 
    Any suggestions would be appreciated!
    Thank you!

    Have the family member who made the gift contact the place of purchase if possible. Most business records of computer sales have info like serial numbers

  • HT200276 HOW WILL I GET THE LOST SERIAL NUMBER OF FINAL CUT STUDIO

    HOW WILL I GET THE LOST SERIAL NUMBER OF FINAL CUT STUDIO ???

    It's on the back of the installation booklet. If you've lost that, and have some proof of purchase, it can probably be sorted out by contacting Apple.
    Russ

  • I have the 60 day trial. I bought a licence. How do i get my previous serial number

    I have the coldfusion builder3 60 day trial. I bought a license. Now when I try to install i am asked for my previous serial number.

    Hi Marty,
    I have checked the serial number. This is for ColdFusion Builder 3 upgrade. I was unable to locate any previous serial number under your account.
    Do you have any proof of previous purchase(s)?
    Regards,
    Anit Kumar

  • How do I get the activation serial number for

    I've downloaded Photoshop CS6 Extended trial version. How do I get the activation serial number for this software

    You will need to buy the software.

  • Where is my aperture serial number?

    I'm getting a prompt for my name and Aperture serial number from installation.   I bought Aperture from the App store and have none of the packaging the prompt asks me to check.   What's up?   After two years of using this application I now can't get at my photos.

    If you bought from the Mac App Store, the one you access using the App Store.. app then there is no serial number. The app authorizes with your Apple ID and should never ask for a serial number.
    If you bought it from the Apple on-line store which you access via the web browser then you would have been sent a serial number by email when you downloaded Aperture.
    If yu have been using the app for two years what circumstanses are causing you to need to be installing it now? Have you had a drive replaced or got a new system?  Any information you can supply will make it more likely that someone will be able to help.
    regards

  • HT1366 I thought my product was already registered with your service.  My laptop was stolen, how else may I provide my serial number if I do not have my computer any longer.

    I thought my product was already registered with your service. My laptop was stolen, how else may I provide my serial number if I do not have my computer any longer.

    If you registered it in https://supportprofile.apple.com/ you can log in there with your Apple ID and find its serial number.

  • How do I install Photoshop when serial number is called invalid even though I have registered it?

    How do I install Photoshop when serial number is called invalid even though I have registered it?

    https://helpx.adobe.com/x-productkb/global/my-serial-number-doesnt-work.html

  • How can you find your IPAD serial number in your itunes account if you have lost your IPAD

    How can you find your IPAD serial number through your itunes account if you have lost your IPAD

    If you registered it to your account then it should be on your support profile : https://supportprofile.apple.com/
    Or if you have a backup of it on your computer's iTunes then go into Edit > Preferences (iTunes > Preferences on a Mac), and on the Devices tab hover your mouse pointer over the iPad's backup :

Maybe you are looking for

  • Slow Loading data from DB, one record at a time, HOW?

    I am currently doing a project.... I need to display a record of data on a "form"(JFrame) the way i handle it is 1. Load first record 2. pass to the display object 3. display object -> on click next, call manager object to process the request 4. mana

  • How can I add 100s of old photos to albums on my N...

    Hi - I've just switched to an N80. I've got hundreds of photos from previous phones stored in folders. As you'll know, to get this category effect on the N80 I'll need to add them to albums. Any ideas of how I can do this easily for such a large numb

  • Photo I set as desktop comes out too zoomed in

    Hello, When I try to set a a photo as my desk top image it comes out very zoomed in...quite beyond merely fitting to screen. Is it something to do with my wide screen? It even does this with 16:9 photos. Thanks for any help in advance. W

  • Logical measure column

    I created new flag in informatica to identify a service request which fall for certain conditions. If the service request fall under conditions and then i will mark as 1. If not then 0. I defined this as INT in physical layer. and my new logical colu

  • Formss

    Can anyone give detailed steps for ....... 1.     Create a new SMARTFORM as a welcome letter. 2.     The welcome letter should be printed if the date on the selection screen is within 7 days of the join date in the employee table. 3.     A parameter