How do I lock down the new iPAD for enterprise use?
We are planning to purchase iPADs for Enterprise and give it to a certain department. I would like to know if there is a way to lock it down the iPADs so that individual users can not download any apps on it other than what the IT team puts on the iPADs.
Thank you for your help and for our time,
Adana01
You will have to go to settings - restrictions - on each iPad and disable app installation.
They will not be able to install apps unless they know the restrictions access password.
Similar Messages
-
How long should I charge the New iPad battery ??
Hi,
Can someone tell me :
How long should I charge the New iPad battery ??
i dont know, and i cant find this on the apple page.
i know that with the iPod Touch Five and Four Generation, the charge its only 2-4 hours but on the iPad how long is the charge?
im really miss it!
Can someone help me ?
Thanks!!The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
hi can any one help i want to get the new ipad for work but i need to print.i see i can buy a usb connector can i print if i plug my printer into the usb.
If you have a USB printer connected to your computer, Mac or PC, you can activate or install AirPrint and print from your iPad over wifi without any special apps.
Activate AirPrint in Mac OS X;
http://netputing.com/airprintactivator/
Add AirPrint to Windows;
http://jaxov.com/2010/11/how-to-enable-airprint-service-on-windows/ -
I have two iPads. With two functioning iPads. Is it possible (on the same ID) to sync two of them differently with the same account. So I want to use the new iPad for all my current functions. The old iPad for just my music collection and remove all the other stuff?
Very easily. I have an iPod touch and iPad on the same account with totally different content.
If you use iTunes, connect each iPad to your computer and open iTunes and deselect any automatic updating/syncing. If you don't sync with iTunes but have them set up independently, under the settings, App Store, turn off automatic downloads for apps, etc.
I'm old fashioned, I set up and sync my iPad and iPod to my computer and iTunes. Each device has a different name and I manage content manually and only allow sharing on what I want shared. -
It's so easy to do so with the iPhone. All I have to do it plug it to the computer, open the folder, then copy and paste the photos. But as for the new iPad, no photos can be detected. I have no way of transferring the photos to my computer at all!!! This is SO frustrating! Please help
- If the photos were taken by or saved to the iPad see:
iOS: Importing personal photos and videos from iOS devices to your computer
Which is the same as iPhone.
- If they were synced to the iPoad you need a third-party progrm like PhoneView.
- Also this may help:
iOS: Unable to import photos or device not recognized as a camera -
How/when will AIR support the new iPad?
I believe that the following will be needed:
- new placeholders in app xml for the new iPad retina icons
- a mode that will allow the content done in 'non-retina' iPad to be viewed on new IPad (like the tag that makes iPhone 4 to fill 4 pixels and be used as the iPhone 3)
- a simulator for all AIR environments, which allows the visualization of the iPad retina display (I guess it will have to have scrollbars for the first time in a mobile phone simulator, since the height is going to be 2048 pixels :-O )
- anything left on the list?ok so i guess its 50/50 so far. stretching to big screen works fine but native resolution does not seam to be supported. Meaning i see pixilization on side of the image. if vector is used it should not be a problem (i guess)
for testing i used high res images from here: http://www.zastavki.com/eng/Motocycles/Harley_Davidson/wallpaper-12206-18.htm just to give proper credit to who ever did the image
So for 1st test i used regualr ipad resolution 1024*768 i used HIGH res setings and placed 1280x800 photo obviously it got cut off, some side of the modules pixelazied but oveall model is ok no big digtortion
Next i inputed resolution to be 2048*1536, image now fully fits in, so i would expect it to be rendered nicely on large canvas yet i have same ordrder pixilization (ani alising needed i guess) I may be a bit picky but i consider interface by Apple to be perfect and our image that seams to be well rendering (externally) gets dissorted
Anyway here is snapshot
Now, lets play with bigger resolution image... i used 1920x1200 resolution source image and HD canvas. Got image to be displayed almost full screen but sides of the images are not that perfect again.
Now i figure that print screens may not shto artifacts of renderings so i took some photos
As you can see around (5) has sitortion even though there is no on original image. This is photo of last test in HD mode full screen large image.
Here is another one
So my conclusion so far, is that 1024*768 and 2048*1536 have sa,e result in both case there is some sort of stratching and smoothing applied by player. Logically higher resolution images should look better on "new ipad" but i did not see that in my test.
Maybe i did something wrong but taht what I have so far! Any comments ideas? Lets get this thing to have perefect output... maybe you have other test assets? -
Could I trade or rersell the new iPad for the the iPad with retina display
I went back to the US to visit my dad, and I bought the new iPad Wi-Fi + cellular data 32 gb on early July. I came back to Thailand on mid July and stayed there until now. I heard that the iPad with retina display came out less than a year later after the new iPad. I am planning to back to US around early September. Is there a way I could trade or resell my iPad 3rd gen for the 4th gen when I come back? Thank you
Your only option is to sell the iPad and buy a new one.
How to Sell Your Old iPad http://tinyurl.com/85d69lk
Other sources to sell.
eBay Instant Sell http://instantsale.ebay.com/?search=ipad
Sell and Recycle Used Electronics - Gazelle http://www.gazelle.com/
For instant gratification in selling a used iPhone or iPad, Gazelle’s Gadget Trader, an iOS app, is tough to beat. In seconds it detects the device and reveals how much it is worth in good condition. Tap the Sell This Phone to Gazelle button and the deed is done.
Sell Electronics for Cash - Next Worth http://www.nextworth.com/
Buy My Tronics http://www.buymytronics.com/
Sell Your iPad http://www.sellyourmac.com/mac-product-guides/ipad.html
Totem http://www.hellototem.com/
Cheers, Tom -
FORGOTEEN......... VERY SORRY ABOUT IT BECAUSE THE NEW iPad is BEYOND FROM MY ANY EXPECTATIONS......... IT IS THE FIRST TIME I TRY (USE) AN APPLE PRODUCT............ I AM REALLY VERY IMPRESSED FROM THAT UNIMAGINABLE PRODUCT!!! APART THE TWO MENTIONED PROBLEMS (EVERYTHIN NEW TAKES TIME TO BE LEARNT) IT IS REALLY THE MOST PERFECT WEB TOOL I HAVE EVER USED SO FAR (I DO NOT WORK FOR THE APPLE AND I AM NOT PAID FOR A RELEVANT ADVERTISMENT, NEITHER) - PLEASE SHOW ME IN A SIMPLE WAY (I AM NOT FAMILIAR WITH THOSE MACHINES BUT THEY ARE VERY USEFULL TO ALL OF US NOWADAYS), HOW TO POST DIRECTLY AN IMAGE FROM MY NEW ipad to FaceBook and the second one, in which way I CAN COPY - SYNC MY HD PHOTOS TO MY NEW ipad (I DID SO WITH MY ALL MY EMAIL ADDRESSES/CONSTACTS FROM THE MS OUTLOOK TO MY NEW iPAD DIRECTLY. I HOPE THERE WILL BE NO PROBLEMS - DIFFICULTIES TO PLACE VIDEOS DIRECTLY FROM MY NEW ipad to BOTH FACEBOOK AND YOUTUBE, THANS FOR YOUR UNDERSTANDING AND YOUR EFFORTS TO HELP ME, GREETING TO ALL OF YOUR FROM ATHENS, GREECE, ENJOY WITH THE NEW ipad, IT IS A FANSTASTIC WEB ETC TOOL
CONSTANTINOS SPYROPOULOS
ATHENS, GREECEHave you read my reply to your other thread : https://discussions.apple.com/message/18373620#18373620 ?
For Facebook try one of the facebook apps e.g. the 'official' Facebook app
To sync photos, connect and select your iPad on the left-hand side of your computer's iTunes, and on the right-hand side there should be a series of tabs, one of which should be Photos - if you select that tab you can then select which photo folders to sync to the iPad. There is a bit more info on this page : http://support.apple.com/kb/HT4236 . You will need to sync all the photos that you want on the iPad together in one go as only the most recent photo sync remains on the iPad - not including photos in a subsequent sync is how you delete them from the iPad.
(And don't type in capitals, it is considered SHOUTING so people are less likely to reply, and it makes it harder to read) -
The new iPad for sixth grader?
For a sixth grader, do you think the new ipad, 32 gb would be fine?
Also learn how to reset after the passcode is set and then forgotten, while restoring the previously backed-up information. Sorry, but the number of "my daughter forgot her passcode" posts *daily* is notable.
Also many reports of leaving backpacks unattended in classrooms and iPads disappearing. Sorry, but read the number of posts about this. -
the new ipad shows no copys with two weeks, so now can not get in
Has he tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds after which the Apple logo should appear - he won't lose any content, it's the iPad equivalent of a reboot.
-
Does anyone know what app is the one they use in the new iPad for photo color adjustment
I would like to know if anyone that has seen the new IPad commercial knows what app is used to adjust the colors on the photos
The app in the commercial is iPhoto for iOS. But there a several other photo apps that can adjust the color in a photo and do other edits on photos. Visit the Apple App store on your iPad and search on photo.
-
How do I lock down the wifi network?
I just had fios installed today would like to upgrade the security to wpa or wpa2. Can someone please tell me the procedure on how to do this.
Thanks, Geoffgpg wrote:
I just had fios installed today would like to upgrade the security to wpa or wpa2. Can someone please tell me the procedure on how to do this.
Thanks, Geoff
There are 3 things you should do to "lock down" your network.
1. Change the default administration password. The default is password or password1.
2. Change the SSID and set to not broadcast.
3. Set the security to WPA-psk or WPA2-psk and pick a password key.
To do this, log in to the router by opening your internet program and type 192.168.1.1 in to the address bar. Type admin and the password into the login page. Once logged in, click on "wireless settings". Click on "basic settings". From there you can change the SSID and turn off WEP. Once that is done, click apply. Now click on "advanced settings". From this page you can select your security type, set the password key (recommend a sentence that is easy to remember) and turn SSID broadcast off. You can also set mac filtering for extra security. When done click apply. You should be all set.
"If your problem has been solved, please mark it as such. Don't forget to hand out your Kudos!" -
How many do not like the new update for the droid maxx? How do you unupdate your phone?
The alarm clock is harder to manage. Before it was nice neat simple and easily readable. I have 4 alarms I use. I change the times around sometimes and I used to be able to see them all. I pick the one I want. Quick 2 sec change and done.
Now its large and harder to read. Go into the Alarm and you have to go around. I used to just type the hr I want or scroll up.
After selecting an alarm. When I was done. I could easily select the next one I wanted because It would revert back to neat simple view. Not now. That alarm takes up the whole screen.
When unlocking the screen I used to be able to go left to get straight to the phone. Go down for a text. Not anymore.
When in a call and I changed apps. I could go back to the phone by selecting the phone pic. The dial pad would be right there. Switch the speaker on and off.
Now once I switch out from phone and I can't get back to the dial pad.
From home screen scroll left to bring up
ringtone.
wifi
bluetooth and so on.
I select the on off for wifi in 1 second. Nope. Have to go into the option and change it.
It updated my google maps. I don't like the new one and I can't change it back to the original. On the original I used to be and to look at different options to my routing. Now thats not possible.
Hasn't any business ever heard of the term.
IF IT AINT BROKE DON'T FIX IT.Did the issues start right after the software update?
Umm. Yeah. thats usually what happens when you update something. Things change.
I didn't say I didn't want my phone to be improved to work faster.
I did however say I didn't want it completely changed.
The look of it alone causes me headaches.
I don't want you to fix any issues other than getting rid of the update. Thats it. I will be, along with everyone else, will be happy when someone does something to get rid off this ugly looking, update.
Its simple. I just don't want the new look.
If I wanted it to look the way it does now. I would have gone to the store and bought a phone that has this look.
I like the way it was.
I did a factory reset. It does not do anything except remove the settings app and other info.
Then when the phone turned on. It started updating every single app I owned. Its trying to run up my bill.
Let me do this when I am using wifi or something. Not on my service.
Before anyone answers about this.
Go to app store hit stop. Change the settings auto update off.
Didn't work. 10 minutes later while waiting on hold I happen to look at my phone again. It started downloading them all again. I stopped them. Double checked my settings. Made sure auto update was off.
I have a few apps I don't update and they work perfectly fine.
I like them that way.
Ann154
You should also try the recent app screen/view to switch between apps and the dialer to return to the dialer screen.
Your in a phone call. Go to the home screen. Click the phone button.
3 things come up.
Use touch tone keypad.
Return call in progress.
3rd unimportant for this. I want to see the dialpad.
Option 1. Use touch tone keypad. Select to bring up the dialpad. Ok. Got it.
Option 2. Return to call in progress. Select to ring up the dialpad.....
Hmmm. Option 1 and 2 do exactly the same thing. Now whos bright idea was it to have 2 options in the same menu. To do exactly the same thing.
Why don't we just select the phone and it brings up the dialpad.
Want to add a call.
You could try the recent app screen/view to switch between apps. -
How to import playlists in the new plays-for-sure suit for zen to
hey all,
well before the new touch firmware, i could import wmp playlists using the import feature of media source, and then transfer it to my touch using media source as well
now my meida source does not recognize my zen touch with the new firmware on it (2.), and im using the new suite explorer that they are telling us to use with Zen now. What I can't find in this new software suite is any import feature for playlists. IF I still import using media source, I can not transfer it to the touch cause it doesn't appear in the destination panel. I couldnt find a way to save the imported playlist (in media source) to disk and then drag and drop the file using the new software suit. I could not find any file on my computer with zpl extension, even though they show up in media source.
so HOW can i import wmp playlists to my zen touch with the new firmware. And do not even mention automatic synching using WMP. that just isn't what I'm looking for...
help and suggestions are eagerly awaited...You need to install the latest MediaSource first:
- Download and install the latest Creative MediaSource Player/Organizer 3.30.2 from your product download site.
After that, download and install the Creative Software Suite for PlaysForSure-enabled Creative Zen Touch Players. -
How can i download my the new software for my iPod Touch?
so the thing is i cant upload my ipod cause my itunes says that i have a new software update but i try to download it and it takes like 3 hours or more to download it and when it's almos done it says that the thing have some error and that i can't download it and i don't know what's wrong with my ipod i really do need help please -Jenny
Try disabling your firewall and try again.
Maybe you are looking for
-
How can i see my device on itunes
how can i see my device on itunes
-
Cost of replacing 20GB ipod classic with 120GB ipod classic in india
my IPOD classic of 20GB is not functioning and the support center have said that I can go in for a replacement of this device by submission of this one and paying for a 120GB replacement one. Has anyone done the same in India.
-
I just got an ipad, and i can't get it to work. Can someone help me?
Having a prob getting my ipad2 to start up.
-
Whenever I try to get into the store I get an error message (no number) saying iTunes could not connect to the iTunes Store and to make sure my network connection is active and try again. I have tried flushing DNS and the other Apple suggestions. Thi
-
Hi, I have read every stream I can find about iphoto and finding the original quality photos, but nothing has worked for me. My problem is, I am importing photos that are 8mb. Once in iphoto'08 they are converted to 1mb. Now, I have dragged photos fr