How do I lock or pass code protect apps or folder of apps

Hi
How do I lock either a single app or folder of apps?
Thanks

The only way to lock an app is if that specic app has that capibility. Apple does not allow one app to control another app.

Similar Messages

  • I have entered the wrong numbers to put my phone in pass code lock.  However, I didn't set the autolock....how can I get the pass code lock reset?

    I have entered the wrong numbers to put my phone in pass code lock.  However, I didn't set the autolock....how can I get the pass code lock reset?

    Your only choice is to place the phone in DFU mode (search Google for instructions) and restore as a new device.  You will lose all your data.

  • Forgot my lock pass code. how do i reset my pass code

    forgot my pass code. how do i reset my pass code?

    I have a use ipod it worked when i bough  it. but did not sysnic it to my computer and starting downloading with my wirelss and put a password in it,  it work fine until my son changed my password and forgot it and now it will not sysnic wirh my computer.  I have the information from it , Still can't get it to do anything. not even with itunes. Looking for firmware to open  it to change my passcode.

  • How do I get my pass code if I do not know it to download latest software update

    How do I get the pass code for my I pad if I do not know it...need it for updates?

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • HT1430 How can I retrieve my pass code?

    How can I retrieve my pass code?
    My Ipad mini is disabled

    Try this first - I saw a recent post where a user with the same problem after an iOS update used his Apple ID password.
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How you restore your security pass code if you have disabled your iPod, due to too many pass code attempts

    How you restore your security pass code if you have disabled your iPod, due to too many pass code attempts?

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • How do I get a pass code, for my iPad mini

    How do I get a pass code for my iPad mini.

    What exactly do you meanby "Get a pass code"?
    Do you want to set one?
    do you need to enter one but don;t know it?
    Please provide as much detail as possible about the issue.

  • How to get the restriction pass code for iPhone ?

    How to get the restriction pass code for iPhone ?

    if you forgot it you have to restore your phone to get past that code

  • HT201394 I just updated my iPhone 4s to iso 8.2  How do I create a pass code to open my phone without using my password every time?

    I just updated my iPhone 4s to iso 8.2  How do I create a pass code to open my phone without using my pass word every time?

    I couldn't find the edit button on my original post so I am posting an update here.
    I have gone through more apps and have had good luck on all but one more.  And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should.  On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much.  I will post a note in the app store to let them know.  I really like the Yahoo app better than the new stock app.
    I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine. 
    Starbucks app works as it should. 
    I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again.

  • How can I know my pass code pleas?

    How can I know my pass cod?pleas help me

    Hi
    If you have forgotten your passcode there is no way of finding it out again unless you remember it, to reset it see here:
    http://support.apple.com/kb/HT1212
    Hope this helps

  • How do I turn off pass code on iPhone 5?

    How do I turn off pass code on iPhone 5.  It freezes up when I tap on it under settings.

    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • My ipad is locked, the pass code not activate my divice. what can I do to resolve this problem?

    My ipad is locked, the pass code not activate my divice. what can I do to resolve this problem?

    You should connect your ipad 2 to the computer you registered it too.  And then, the pass code would be off. If that doesn't work, then you should go to the Apple Store and they will unlock it for you but you will have to answer some security questions.

  • HT201328 my iphone4 has locked by pass code and i'Forgot the password and i'cant restore my iphone

    my iphone4 has locked by pass code and i'Forgot the password and i'cant restore my iphone

    i'put it in recovery mode and i'cant do the restore

  • Forgot my Ipad lock screen pass code

    I forgot my lock screen pass code and I can't get into my Ipad. I tried to restore my Ipad. It keeps asking me to turn off find my Iphone. I can't get into my Ipad to do that. Then I tried to get into my Iclouds account to erase my Ipad. But is not showing it says to add device. Please help.

    Hi spiggz,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    Cheers,
    - Judy

  • HT1212 How do i change a pass code useing icloud?

    How do i change a pass code on icloud?

    Your iCloud password is the same as your Apple ID password. You change your password at Manage your Apple ID: https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
    Cheers,
    GB

Maybe you are looking for

  • HT2534 Removal of Payment Method

    I am trying to remove my credit card from the iTunes store but when I go to payment method the "None" payment button is not appearing and it won't show up. How am I suppose to remove my credit card?

  • How Can I run examples of the NI-DAQ 7.4 driver with visual c++ 6.0?

    MY card is NI6723,an the driver that i have is Version 7.4 for Traditional NI-DAQ/NI-DAQmx/NI-switch. when I run the example:C:\Program Files\National Instruments\NI-DAQ\Examples\VisualC:Ao; All of them can be compiled successfully,but can not be run

  • Is it possible to call a C-function from Java?

    Hey! I have some extern variables written in C-language, can i get them into a java-file using java? How to do this otherwise? Can i use Native interface java? Or is that only the opposite way? Thanks Mikael

  • Viewing images via Bridge CS3

    I usually adjust images in Aperture but have just begun to use the Raw converter within CS3 for a few files. I can export master files onto my desktop and dbl click to open the NEF file, however, this seems very clumsy. I know you can access the RAW

  • Keywords for RAW & JPG files

    In Bridge CS5 I  have a folder with several RAW files. I have edited those shots and saved them as jpg's. I just went and applied keywords to the files and it worked perfectly on the RAW files but not the jpg's. I get an error message about there bei