How do I lower sound file volume during video play?

I have a Flash CS4 project with sound that starts to play in the first scene, set to event/loop so that it plays all through the entire time.
But I have a piece of video with audio in another scene and I would like to have the sound file playing at a lower volume while the video is playing, then get it to return to normal volume when the video is over.
I have no actionscript at this point. Just timeline animations, etc.
Anyone have an idea how I could accomplish this?
Thanks!

Thank you for this, but unfortunately, I don't think this quite does what I am aiming for.
1) Now the file is in AS3.
2) I have one audio file making background music throughout the entire file.
3) The video comes in at a later scene.
4) I want to lower the volume of the background music file while the video is playing, then get it to normal volume after the video.
Thanks for your help.

Similar Messages

Sound reduction halfway during video play

Almost every time I play a video on my iphone, the sound automatically gets reduced a few seconds after the video starts. The sound is reduced back to the minimum volume.
Is there something wrong with the phone?

Sorry i'm using an iPhone 5s with the latest iOS 8.1.3. This also happened before this update.

Just bought my 1st mac. I have some wma format music files which wo'nt play on i tunes. How best to convert these files so they will play on iTunes?

just bought my 1st mac. I have some wma format music files which wo'nt play on i tunes. How best to convert these files so they will play on iTunes? Any suggestions much appreciated

Try using VLC Media Player 2.0.6. EasyWMA 3.3.5 or Music Converter 1.5.1 should be able to convert them to .mp3.

HT3775 how can i open the file MPEG-2 Video, AC3 on my mac, when its coming from a sony camcorder?

how can i open the file MPEG-2 Video, AC3 on my mac, when its coming from a sony camcorder?

I think those files are Samsung's proprietary format, so only the Samsung software can open and display them. If they do not make their software for OS X, then you are stuck requiring windows.
I thought the DVR itself lets you save as standard avi as the backup file format?

Why does my Flash Player keep freezing during video play back?

I have the very lastest version for Windows 7 64bit OS and it keeps freezing during video play back. The previous versions did not do this. I have to keep the cursor moving inside the video window to prevent the player freezing. I have deslected HARDWARE ACCELERATION and it does not help. Why is this happening and how do I correct this situation?

Right click ANY Flash content and choose "Setings".
Click the folder icon (center tab) and increase the storage to at least 10Mb.

HT4437 how can i stream audio to ipad from video playing on the apple tv using air play?

how can i stream audio to ipad from video playing on the apple tv using air play?

I don't know what AppleTV can handle as far as bit rate is concerned, but increase the bit rate as high as it will let you. You are taking DV which is 25Mb/s and compressing it. If you're making an H.264, you should get great results needing no more than 6Mb/s. Bear in mind, the higher the bit rate, the larger the file size.

How I store my sound file in my database table

Dear friend
i make a table for store sound file
table is create .
but now
how i insert that file which is at 'c:\my document '
to this table.
i try following command but it has a error
insert into sound values('c:\my document\abc.au');
what i do for it
please mail me as soon as on following id
[email protected]
ok bye

Dear friend
i make a table for store sound file
table is create .
but now
how i insert that file which is at 'c:\my document '
to this table.
i try following command but it has a error
insert into sound values('c:\my document\abc.au');
what i do for it
please mail me as soon as on following id
[email protected]
ok bye

How Can I export Sound Files for Sound mixing?

Can someone please explain me the process of exprting sound sound files for the Sound Mixer & Composer? How do I deliver it to them?

Welcome to the forum.
First, what version of PrE are you using, and then, on what OS version?
In general (specifics can come, with the above info), one would Share/Publish+Share (or Export in older versions) the Timeline as an intermediate Audio-only file. That would be Imported, or Opened in the audio-editor program.
In PrE 11, or 12, one would go to Publish+Share, and then Computer. There, they would scroll down the list, to Audio. Note: the scroll bars are not easy to see, but easy to miss. Look to the far right of the Panel. With Audio selected, choose PCM/WAV @ 48KHz 16-bit. That will get you the best file to edit further with your DAW. When that editing is complete, use PCM/WAV @ 48KHz 16-bit, then Import the resultant edited Audio file into the PrE Project, placing it on an empty Audio Track, say Audio 2, or 3. To maintain its position, I would place the CTI (Current Time Indicator) at exactly the point that you want that edited Audio file to be, perhaps at the start of the Timeline. Then, with Snap turned ON, the edited Audio file should snap to the CTI.
When it is in place, you can Delete the other Audio (that which you exported for additional editing), or just go to the Audio Mixer, and check Mute for any Tracks, that contain that original material.
Hope that helps, and if you can let us know a bit more, then someone can step you through any "gray areas," for your specific version.
Good luck,
Hunt

How to connect read sound file from chart to Moving STFT PtByPt

Hi!
I got a

Hi sean1985,
The Sound File Read Simple.vi returns the data as an array of waveforms, while the STFT Spectrogram PtByPt.vi accepts a single waveform. In order to pass the data from Sound File Read Simple.vi to STFT Spectrogram PtByPt.vi, you will need to index into the array and pass each individual waveform to STFT Spectrogram PtByPt.vi from the array of waveforms that is generated by Sound File Read Simple.vi.
Thanks,
Jonathan C
Staff Application Engineering Specialist | CTD | CLA
National Instruments

How to run a sound file from a remote location?

Hello i am Parikshit and am preparing a project on Network Player which will play the files playing on server i.e sound files may be a song or any educational stuff.I have constructed the player and now i want to take it to the LAN or network level all i need to know is the basic idea about what should be done to establish the connection between 1 SERVER and 60 or more clients. My player is a stand alone application.

>
..what should be done to establish the connection between 1 SERVER and 60 or more clients. >It looks as though this app. needs RTP streaming. I have not experimented with streaming, but you might use the JMF to do it, and start reading about it here.
[http://java.sun.com/products/java-media/jmf/2.1.1/guide/RTPRealTime.html]

How do I get sound when I record videos on my ipad?

I can record videos using the camera app - however, there is not sound. How do I get sound?

Thanks - this is good to know. I actually ended up going to Google - which took me to Youtube - which showed me my volume button. Oy. I felt sheepish. However, this is on loan to me from my work - and up until now - it has "lived" in a manila folder in my file cabinet. For a first day, I'm doing well.
It's good to know that I can inadvertantly cover the microphone myself. Thanks!

Sound stop playing during video playing on ipad 1 with ios 5.1.1

after updating my ipad 1 to ios 5.11 the sound on my ipad sometimes stops suddenly. it happens during video playback, music listening or just text typing on keyboard.
i ve tried all the advices seen on communities and no one worked for me (restore the system, change the lock screen button configuration, clean the headphone input, test with apple headphones...)
please help me to find a solution and thank you for your help.
another information : when sound stop playing, sometimes when i lock the ipad, a strange noise comes from the speakers like a larsen.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
 Cheers, Tom

Tiny sound file could not be played.

Hi.
Why could not play the tiny sound file? (such as mp3 or wav files of 500ms duration)
It worked fine with iPhone SDK 2.1, but not with iPhone SDK 2.2
Of course, normal sound file(i.e, about 3 seconds ) works normally.
And all codes have not any errors, just voice is not heard.
I am using Audio Queue Services to play sound file.
Isn' it a buf of iPhone SDK 2.2?

Thank you for you reply - much appreciated.
I am a bit confused - if I do not have a player installed, how come that everything is OK when I use Google Chrome as a browser?
Many thanks,
Jimmy

Sound File Read and Express Play WaveForm.

Hi, all
I am trying to control the volume on the Play WaveForm express vi, but have not been able to make this happen. Does any one have suggestions that I can run with.
Thank you.

I have found two examples of an Audio Equalizer that controls a sound output. The first is simplified version of the second. I hope this helps!
Audio Equalizer (simplified): https://decibel.ni.com/content/docs/DOC-8435
Audio Equalizer (advanced): https://decibel.ni.com/content/docs/DOC-16037
Regards,
Jason D
Applications Engineer
National Instruments

How to turn off sound when taking a video

How to turn off sound when taking a video

debrafromusa,
This would be an extremely bad idea, the start up tone is there for a reason. It tells you when your system is attempting to boot, it is also necessary in the even resets like a PRAM reset are done. There is software to mask the sound however as stated it is a very poor idea.
Also, why turn it off. Why not simply put the display to sleep when the machine is not in use. You can easily do that in System Preferences - Energy Saver

How do I lower sound file volume during video play?

Similar Messages

Maybe you are looking for