How do I lower the applemobiledeviceservice.exe*31 cpu usage?
How do I lower the applemobiledeviceservice.exe*31 cpu usage? It is running between 10-16% of my cpu usage for my laptop. Even if I shut it down in the windows task manager it starts back up in a few minutes. I am running windows 7.
Thank You for your help with this.
Michel Chaouli wrote:
I also ran Onyx and did all the maintenance steps.
Did you also do all the cleaning steps?
OnyX clears the dyld cache
Run through the Steps here
..Step by Step to fix your Mac
Also this
Why is my computer slow?
Eliminate a Wifi issue by connecting a Ethernet cable directly to your router or modem (power off/on)
If your still having beachball issues, what I suspect has occured (which a lot of people mistakenly do) is the hard drive got sectors damaged when the computer was moved/bumped while it was in operation.
The fix for this (and anything else) is rather drastic, all user data off the Macintosh HD will have to be removed, the entire partition Disk Utility > Erase with Secure Zero (or middle selection option), OS X reinstalled and updated, programs reinstalled and files returned.
If one has a previous uneffected bootable clone or TimeMachine backup that can be used to restore.
Most commonly used backup methods
Reducing bad sectors effect on hard drives
Similar Messages
-
I recently videotaped a birthday party. I recorded "shout-outs" , however the DJ music is pumping in the background. How do I lower the music in the background editing with fce4?
Thank youBasically, you can't. There are no adjustments or filters in FCE that could separate the music from the 'shout-outs' and enable you to lower the music and/or raise the voice.
You could attempt a workaround by using noise reduction with a plugin like WaveArts MR Noise but that may or may not work since music isn't a constant type of noise. However, you can download a fully-functional demo to test whether or not it would help. -
How can I lower the dpi from 600 to 300 on my CM1017 MFP
How can I lower the dpi from 600 to 300 on my CM1017 MFP? Thanks to anyone who can help me!
No problem at all with extending the life of your toner!! Have you tried the advanced options in the printer preferences? Try checking here:
1.Open Printers and Faxes
2.Right-click the icon for the printer you are using, and then click Printing Preferences.
3.Click Advanced, and under Graphic, click Print Quality.
4.Click the resolution option you want.
Let me know if this is what you are looking for. Good luck!
-SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
How do I lower the write speed for burning a DVD? It gives me no option!
How do I lower the write speed for burning a DVD? It gives me no option!
Export the dvd as an image from Encore, then use Imgburn to make the discs. I usually export a dvd folder from Encore and then use Imgburn to create the iso and do the burning
The Official ImgBurn Website
Be careful if you download it, it will try and install allsorts of other programs. This thread might be of some help.
Imgburn and Bloatware Add-ons -
How to check the memory and CPU usage on NPU
Hi expert ,
Could you tell me how to check the memory and cpu usage on NPU?
I think ASR1000 has this command (show platform hardware qfp active...) , but I coudn't find the same command on ASR9001.
I checked " show controllers np counters all" command, but I did not find it.
Platform: ASR9001
version: 4.3.2
NP: Tyhoon
Thanks,Hi Kanako,
understand your question, but something like that doesnt exist for the trident/typhoon NPU's for the asr9k.
in fact cpu usage is not really applicable for parallel/serialized hardware forwarders, but mainly the KPI is here
the PPS it handles.
The max pps it can handle is dependent on feature set.
What you could do is measure the rates on the PARSE_FABRIC_RECEIVE count (packets received from fabric, so egress direction), PARSE_ENET_RECEIVE count (packets received from the interface to the fabric, so ingress) and the LOOPBACK count, that is packets that are recirculated for extra processing. The sum of these 3 gives an idea of the PPS rate the NPU is working on.
Memory consumption is something tricky also, there are many memories attached to the NPU, notably:
TCAM used for vlan matching, ACL and QOS matching
Search memory for L2 and L3 (shared on Trident, separated on Typhoon)
Frame memory for packet bufferin in QOS
Stats memory, for all kinds of counters of QOS maps, interface stats etc
their usage is rather dynamic also.
The few things you want to verify on these are:
- ACL usage (in terms of Tcam entries)
- MAC table size (2M max on typhoon)
- FIB size (4M max on typhoon)
frame memory is dependent on the buffering, which is a sum of all the packets instant queue length and size of all pmaps attached to interfaces served by the same NPU. there is no good overview as to how much you have available of that, but it has a rather significant size 1G or 2G depending on the TR or SE cards (typhoon specific).
regards
xander
Xander Thuijs CCIE #6775
Principal Engineer
ASR9000, CRS, NCS6000 & IOS-XR -
"How do I fix the Firefox.exe application error?"
How do I fix this Firefox.exe - Application Error, "The instruction at "0x00000000" referenced memory at "0x00000000", The memory could not be "written" - that appears when I open Firefox?
== This happened ==
Every time Firefox opened
== Opening FirefoxDo a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can initially skip the step to create a new profile, that may not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
NEED HELP - how do i lower the burn rate to 1x in DVD Studio Pro 4
Ok, i made a (2) master copies of a DVD-R (Verbatim) in Studio Pro 4 and sent it to a duplicator and I got a call saying there was unreadable data on the discs.
He then asked me to lower the burn rate to 1x. I can't figure out how to do that. Where do I do that? Please help. Have a deadline!!!
Thanks.Dave
You cannot change the burning speed in DVDSP. It will always use the max speed available. To control the burning speed you need to create a disc image of your project and burn it with Disk Utility or Toast.
Read this tutorial about * Creating Disc Image in DVDSP *.
Hope that helps !
Alberto -
How can you lower the number of days in IOS8 iPhotos deleted
In IOS8 photos deleted stay for 30 days. Can you lower the number of days?
To answer your Subject (rather than the body of your post)
To get the number of controls, and refs to each, etc, you can combine a
couple of example VIs and a little index finger grease to make a VI that
does what you want:
Help menu >> Find Examples
Find Example Dialog >>Browse tab
Programmatically controlling VIs
Manipulating Applications and VI settings
Edit Multiple VI Setups.vi
New Examples for LabVIEW 6.1
Queues
Queue Control Seek.vi
If these two VIs are put in a mixer and shaken (not stirred) you might come
up with something that tastes write.
Mike Ashe
"GL" wrote in message
news:[email protected]..
> I need to convert llb from 6i to 6.1 and I am unable to, I beli
eve
> because I have to many controls and indicators in the llb. -
How do I lower the burn speed?
Using strictly the apple Disc utility, how do I control the burn speed?
I just went through this this week as I'm new to iDVD. When you're in Disk Utility and go to burn it, there is a drop down next to the drive that the disk is in. I think it lists the drive, I'm not in front of my Mac now. Click on that, and you will then see the option to change the drive speed.
I just did this for the first time last night and am finally getting clean DVD burns. Before I just let iDVD do the whole thing from render to burn and the playback kept hanging up on the DVD player. Going at 1x's seems to have corrected it for me. -
How do I lower the saturation on my W520, the reds are burning into my eyes
OK, stupid question, I know, but is there any way to lower the saturation without lowering brightness? The colors are too saturated at brightness 14 and 15.
Windows 7 itself does indeed have system-wide color profiles. You just need to get a proper ICM file.
If you have the Intel control panel load at startup, it overrides any ICM profiles at boot/resume for whatever reason.
Hit Start and search for "Advanced color management". Go to the Advanced tab, hit Change System Defaults.
First add your ICM under All profiles. Then add it under Devices. Delete all other entries in Devices, and set your desired profile to default. You should see a change instantly. If not, go to the Advanced tab and check Use Windows display calibration.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen -
How to find discoverer log files and CPU usage
Hi,
i have a report running very slow in prod. but runs fast in dev and qa.
**Where/how can i find the Log files generated after the report runs?**
**Also i wanted to see how i can find the CPU Usage**
i searched online for CPU usage... and found this --> ""For the CPU usage of these servlets, please navigate to the Discoverer application page from the OC4J_BI_Forms home page in the EM standalone console.""
can anyone tell me how to navigate to OC4J_BI_Forms home page in the EM standalone console?
Thanks!
gayatriHi gayathri,
This link would help i suppose
http://docs.huihoo.com/oracle/docs/B14099_19/bi.1012/b13918/maint.htm#i1025807
and http://docs.huihoo.com/oracle/docs/B14099_19/bi.1012/b13918/tshoot.htm#CHDHFJDE
Be careful,if not done without prior knowledge it would mess up.So mostly this job should be done by DBA of your company.They can log in as sysadministrator to get to "Enterprise Manager" and do as per the link
Best Wishes,
Kranthi. -
Why the OC4J instance CPU Usage still 99% even all user already Logout ?
Hi All,
We are running OAS 10.1.3.3 with ADF BC Application.
At midnight when all user already logout, I notice that :
- on one instance, CPU keep on 99.9 %
- on the EM I see that there is there are 5 active sessions and 4 active request.
How can there are 4 active request while I am sure that I am the only one that login to the EM ?
I have tried to KILL -3 to create thread dump, but it doesn't work
How can I know, what are the those 4 active requests ?
What should I do to find out what consume the CPU ?
Thank you for your help,
xtanto
Edited by: xtanto on Apr 7, 2010 11:23 PMFinally...proof that I am not going mad and that kglad's tweaks to his website make no difference at all to me.
Flash Player
Unacceptable CPU Use on Idle
Created: Tuesday 09:55 PM Updated: Yesterday 12:15 PM
Component/s:
ActionScript Performance
Security Level:
Public (All JIRA Users )
Severity:
Performance
Reproducibility:
Every Time
Discoverability:
High
Found in Version:
Flash Player 10 - 10_0_1_218
Affected OS(s):
Mac - OS 10.5
Injection:
No
Steps to Reproduce:
« Hide
Steps to reproduce:
1. Create empty FLA
2. Publish as AIR or SWF
3. Install/run AIR app, or run SWF in Stand Alone player or browser
4. Check CPU usage in Activity Monitor
Actual Results:
CPU usage of 3-6% on idle
Expected Results:
CPU usage of ~0% on idle
Workaround (if any):
None. Reducing frame rate reduces CPU use, but remains unacceptable even at 1fps.
This is a very serious issue, particularly for AIR applications. Having 3 or 4 AIR applications open on a Mac (a scenario that Adobe would like to see/promote) would use 10-20% of the CPU minimum, even when the applications are not doing anything. I also suspect that this is the root of at least some of the performance problems with Flash CS4 on Mac, as the stage core / swfPanel players are likely each using a sizable % of CPU even when idle.
Language Found:
English
Bugbase Id:
none
Triaged:
Yes
Participants:
Grant Skinner, Manfred Karrer and Tao Feng
Browser:
Other (specify version) -
How can we change the functionality of Room Usage Analysis iview
Hi All,
I want to change the functionality of Room Usage Analysis iview. This iview shows all the Rooms with usage. However we get a hyper link with the Room Name. i want to delete that hyper link and make it as a simple text.
Where can I do the changes. Is it possible to get the code and change?
Thank you inadvance.
RaghuHi All,
Any ideas near to my question is also appreciated. Thankyou in advance.
Raghu -
How can I lower the image quality on a streaming online video
Hi,
I have an old iMac G3 with 500 Mhz Power PC and 1 gig of RAM and running Tiger OS 10.4.11
I am trying to watch online streaming news through http://www.rentadrone.org but it is, of course, jerky playback.
My issue is that adobe flash will not let me change the quality of the video to low because the option is grayed out.
I know that this iMac was prior to videos becoming common online and I know that I have to sacrifice video quality.
I can play youtube videos well, as in not jerky, in the 240 image quality and wanted to be able to do this through
other websites with video. I have disabled Dashboard to gain CPU, tried to play the video through Realplayer and
changed my Display from millions of color to thousands but I haven't been able to stop the jerking on the video.
Is there a workaround or other solution?
Thank you in advance for any suggestions or help.Each video website has its own controllers over how much choice you have over quality of streaming.
However, as you use Real Player, you could wait until the video finishes downloading, then click 'Download' in the RealPlayer Download Agent window and watch it offline, when it should play smoother. -
How do you lower the volume on the dictation beep sound?
Hi there,
I like using the new iPad's built in dictation feature. But when I use it, I find that the alert beep it makes when you start and stop is quite loud, and I don't know how to turn the volume down. All of the other sounds on the my iPad are turned down.
Thanks!I've tried this, but it doesn't work. Does anyone not notice the disparity in the volume of the dictation beep and all other alert sounds on your iPad? It's a loud beep. I have my alert sounds turned right down (still audible, but very low.)
(But thanks Diavonex!)
Maybe you are looking for
-
Spry.Utils.loadURL problem with IE7
Hello there. First of all sorry for my english. I have a problem with Spry.Utils.loadURL function in Internet Explorer 7 only. In firefox works fine. So i have an asp file that returns a string with some stuff. I load this asp file with Spry.Utils.lo
-
Simple question: Declaration of the vaiable
Hi, I declared the following variables to parse character string, Data:v_posfrom TYPE I, v_posto TYPE I, v_length TYPE I. However, when I activate it, I got error: Field type "I" does not permit subfield access. What does it mean, and h
-
Hi All We are in the implementation stage of SAP ERP and currently we have Power User license and my company is implementing modules of FI, CO, MM, SD, PP, PM, PS, BI, BPC. Now our requirement is extended to TRM module as well. I want to ask whether
-
CD song wont transfer to my ipod
Songs I have previously loaded to itunes on my macbook are not transfering to my new itouch. I have reseet it and it still wont load. Any suggestions? I have tried to manually move them over but still does not work.
-
OpenSparc problems, debug
Hi, we are currently working on modifying the ifu unit of the OpenSparc. However, when we map it on the XUP FPGA board, we obtain some weird results. The first diagnostic test passed just fine but the HelloWorld test fails, looping forever and printi