How do I maintain print quality resolution when using both Lightroom and Photoshop?

I usually edit only in LIghtroom, but in this recent photoshoot, the woman's skirt lining was peeking out and I need to photoshop it out.  When I try to do this and save it in Photoshop, the file size drops dramatically and I'm guessing the picture quality.  I also tried to right-click on the picture in Lightroom and choose "Edit in" photoshop, but Photoshop told me I couldn't use the clone tool unless I changed from 16 bit color depth to 8 bit because it had limited support for 16 bit.  I know there has to be a way to do this.  Any ideas?  By the way, I am using LIghtroom 3.6 and an old Photoshop Elements 5.0.

Isacksen
I am not completely convinced that your Premiere Elements 7 project settings are not at the core of your problems.
1. You say that you have 1280 x 720 at X progressive frames per second (probably .mov) from a Canon camera and presumed 1920 x 1080 16:9 .mts @ 29.97 interlaced frames per second (aka 60i). What are you setting as the project preset in the new project dialog? Are you just OK'd it and accepting the default which would be NTSC DV Standard (720 x 480)?
2. As for versions 11 and 12 helping you out with an automatic project preset, sometimes it does it OK and sometimes it does not. So, that feature is not a given cure all for an inappropriate project preset. Whatever the Premiere Elements version, you need to know the properties of your source media and set the project preset accordingly or make sure the program is doing it right. And, when you have a Timeline with a mixed of formats, you need to set priorities.
Is the .mov and .mts both affected by the issue or just one?
Three things to look at:
a. The quality of just the 1280 x 720 in a Premiere Elements 7 project set for
NTSC
HDV
HDV 720p30
b. The quality of just the1920 x 1080 in a Premiere Elements 7 project set for
NTSC
AVCHD
Full HD 1080p30
c. Then look at the quality of both brought into a Premiere Elements 7 project set for
NTSC
AVCHD
Full HD 1080p30
Please consider. And, if you decide to check out the above, please let us know the outcome.
Thank you.
ATR

Similar Messages

  • Recommended hardware configuration when using Adobe Illustrator and Photoshop

    Hello!
    I am an Illustrator who uses Adobe Illustrator and Photoshop most of the time. Today I am using Adobe CS5.5 suite and is thinking of getting the Adobe CC. As my computer today is abit old and "tired", I am unsure about what to focus on when updating my hardware?
    I am using today a HP workstation with following hardware:
    Software:
    Windows 7
    Adobe Creative Suite CS5.5
    Hardware:
    Processor:              Intel i7-2600 3,4GHz
    Internal memory:     8,00 GB DDR3
    Disc drive:               500GB SATA disk 7200rpm
    Graphics card:        NVIDIA GeForce GT 1GB
    Since I work both with Technical Illustrations with loads of anchor points in Adobe Illustrator, I get sometimes error messages like "Out of memory" and such. I read about having two discs, one system disc and one work folder disc, that would solve that problem. But I am also working alot with large illustrations for comercial and advertising situations and I feel that it tend to get a bit slow, especially when I add gradients and blendmodes to an illustration.
    So If I could get som recomendations of what to focus on to boots the speed in my system, also taking into account that my budget is somewhat small, I would really appreciate it!
    Best regards
    Ulf

    I have similar setup to yours.
    From my point of view you need more RAM. I have 16GB. Than you will need to change in preferences to adjust memory used by PS and Illustrator. Maybe take a look at virtual memory in Windows and disable aero effects.
    Disk. It is better to have one disk for system (eg.SSD) and one for documents. But don't buy something like WD Green series that is intended for backup.
    Graphics. It is not a major player I think for your tasks, but OpenGl can speed up rendering in Photoshop and Illustrator.
    When exporting AI with layers to PSD it will always show "out of memory" unless you turn off anti aliasing.
    and the most important thing reinstall Windows after some time... It will work faster.

  • Help - Receive message "an error occurred printing this document" when using airport express and Ipad

    Hi, I am trying to set up an airport express hub to work with a Star tsp100 receipt printer and IPad 2. The IPad is being used to accept credit card payments and I was hoping to print receipts out wirelessly using the airport express and receipt printer. I checked to make sure the airport express has the latest firmware and it does. The IPad software is also updated to the latest 7.1.  I then connected the Airport express and IPad and the network setup with no problems. I connected the receipt printer to the airport express using the USB slot available. While the printer comes up as available, when I attempt to print something, I get the error message "An error occurred printing this document" and I can cancel or Try again. No matter how many times I try, I continue to get this message and I lost as to the cause. When I disconnect and reconnect, another instance of the printer appears, but receive the same cryptic error message when I try to print. Totally lost, please help

    Hi kelston3,
    In order to print from an iPad you will need to use a printer that is compatible with AirPrint, which is described in the following article -
    About AirPrint
    http://support.apple.com/kb/HT4356
    AirPrint printers must be wireless on your network - not connected via USB to the base station. There is a list of printers that are known to be compatible with AirPrint in the article.
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Music volume keeps dropping on my iPhone 6 when using both headphones and AirPlay

    when playing music on my iPhone 6, sometimes the volume will drop for reason at all. Fortunately it doesn't happen too often, but when I'm driving and it dones happen, I can bearly hear it. It corrects itself completely at random too. Please help, it's an annoying problem.

    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
    If this does not help, setting it up as new device would be the next step:
    How to erase your iOS device and then set it up as a new device or restore it from backups

  • DMS viewing when using both GUI and Portal front end

    I have a requirement to be able to access and view documents in both the standard SAP GUI as well as from the portal via the PLM 7.0 web front end.  The issue is when the workstation application is defined as %VIEWER-CONTROL% % SAPPROVIS% I can view 2D (tif) images in the portal but am unable to view from the standard gui.   I am also having issues with JT and office documents from the portal side.  Does anyone have a link to a configuration guide as it relates to correct setting when configuring EHP4 items for the portal?

    Hi,
    based on your description and due to information from my colleagues I
    can provide you the following suggestion and hope this is suitable for
    you.
    The way I see is that you maintain two separate workstation application
    types one with setting which works in the SAP GUI
    i.e. with the ECL Viewer
    EAIWeb.webviewer3D.1 %SAP-CONTROL%
    EAIWeb.webviewer2D.1 %SAP-CONTROL%
    and one for the PLM WebUI with the settings for the embedded viewer
    i.e. with Product Visualization Viewer %VIEWER-CONTROL%%SAPPROVIS%

  • How do I change a student/teacher membership to the Lightroom and Photoshop only membership?

    I would like to switch our student/teacher membership of Creative Cloud to the Lightroom & Photoshop membership.  How do I do that?

    The desktop is a magical place that can have very different attributes than you expect. It is not a good place to put Photos to be edited.
    Try copying them to a Folder in your Photos folder. Make certain that you do not merely create an Alias to the photos on the CD. (An Alias will have an Icon with a little arrow in the corner). Alias take up only a very small amount os space, like 4K or 8K, rather than dozens of MegaBytes for the actual Photos.

  • Hello, I bought the photografers edition of both lightroom and photoshop. And they didin't gave me my licence to continue using photoshop... how can I find my licence????

    Hello, I bought the photografers edition of both lightroom and photoshop. After I paid they didnt gave me the productoct license that i need to continue using both photoshop and lightroom. So, where can I find my product's license?

    The Creative Cloud Applications downloads and licensing are controled via the CC Application Manager so you do not have to input your license key manually.

  • Print quality / resolution for iPhoto books

    Hi -
    I am getting ready to upload my first iPhoto book for printing, and a colleague told me to beware of a potential issue. After searching these forums, and searching Google, I found that people in the past (perhaps prior to iPhoto '08?) have had print quality problems when printing 8.5 x 11 books vs. 6x10 books.
    Basically, we are creating an 8.5 x 11 book and will have several books printed by Apple. At some point in the future, we will make similar books at the 6x10 size. Will the photos that are included in the books print at similar quality?
    Thanks -

    I have ordered books in the past that were made up of photos 1600 x 1200 pixels in dimension and they came out fine. HOWEVER, I had no pages with a photo filling the entire page as Larry warned about.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
    Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • How to set fetchsize of sql Query when using Database Adapter.

    Hi All,
    I am using DatabaseAdapter to connect to database and retriving huge amount of data.For improvement in the performance I want to set the "fetchsize" of sql query. I know fetchsize can be preset in Java using Jdbc 2.0 API.Please let me know how to set this value in BPEL when using DBAdapter?
    Thanks
    Chandra

    I talked to the developer of the db adapter - and he told me this feature will be available in BPEL PM 10.1.3 (which is supposed to be production later this year, and a public beta soon). If this is an emergency I would recommend going throug Oracle support and have them file an enhancement for 10.1.2.0.2
    hth clemens

  • My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

    My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

    <http://www.thexlab.com/faqs/sbbod.html>

  • My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this. I updated both windows and iTunes.

    My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this? I updated both windows and iTunes.

    Work through all the suggestions in this Apple support document first.
    iPod: Does not appear in Windows or iTunes and Device Manager is empty
    B-rock

  • How can I create an icon that when clicked will open and maximize an image file?

    How do I create a icon that when clicked will open and maximize an image file?  I have tried to use the simple image widget with maximize upon tap/click - however I am can only size the image really small and put on the page.  I'd prefer to have a graphic that when clicked it simply opens up the image.  This is for a very simple question/answer book.   The user is suppose to look at a picture and locate something.  I want to put an 'Answer' graphic on the image and then the user can click the 'answer' graphic and it will open up the picture with the answer identified. 
    Is this possible?

    Have yiu tried the PopOver widget?  You can drop an image into it, maximise the image and the widgets window...But, you cannot get it full screen.
    With iBooks Author, you either learn to use what is available within the app, or look online for third party widgets to purchase which suit your project.

  • How to transfer range parameter from vb when using bapi calling

    Hi,everyone.how to transfer range parameter from vb when using BAPI calling?

    Did you get the solution to your problem?  Can you please share it with me. I have a similar problem. I have a VB program that calls RFC function. It works with a single parameter but not with a range of parameters. If you have the solution, could you please share sample codes with me? Thank you so much.

  • How can I show additional tab rows when using many open tabs?

    How can I show additional tab rows when using many open tabs?

    What method (code) did you use to get the Tab bar displaying in the space used for the Navigation Toolbar (location bar)?
    The Tab bar should be displayed above the Navigation Toolbar.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • L7780 poor print quality after not using for 6 months

    Poor print quality after not using my printer for about 6 months.  Ran thru the tools (clean printhead, aligh, etc  . . .) didn't help. Replaced all chartridges, still no help. 
    I'm fairly tech savy, been in IT for 27 years starting with hardware support. 
    Question,  can I manually clean the printheads or should I just replace. I would rather try to clean them manually after just shelling out > $ 170 on new chartridges.
    thanks
    Brent 

    Hi @Brentl 
    Yes, you can clean the printhead and the inside of the printer. The following document will help; 'The Following Printheads are Missing or Damaged, Replace the Printhead' Message Displays on the All....
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

Maybe you are looking for

  • Issue while creating a field at header level in CRM 4.0

    Hi, Using transaction EEWB, I tried to add a custom field at the header level to an existing Project. The Project already had an extension created to which I made the modifications i.e. added the field at header level. But, when I tried to generate t

  • Crystal Report with Windows Vista Home Premium

    (Why I added Code and my paragraph becomes dis-order??) Dear all, This is my first post in this forum. So, if I put at wrong section, Mod please kindly move my thread. Here is what I'm facing now. I have an application which is coded in Visual Studio

  • Restoring Original Track Data

    I recently edited the details of a large number of tracks and I want to restore the original data I.e. Artists Name instead of Various Artists as I had changed it to. I thought if I deleted the tracks from ITunes and re imported them this would resto

  • Error Message in FCPX when exporting Project to DVD

    I am running Final Cut Pro X version 10.1.4 on OS X Yosemite (recently updated to this). Burning 2 Projects to DVD, one was successful the 2nd failed to burn at 33% complete with error message: Com.Apple.Compressor.CompressorKit.ErrorDomain error-1.

  • Dynamic Target Directory name: DEV QUA and PRD

    Dear All, Scenario Idoc to File: I need to configure file directory's dynamically - when the object is moved to D, Q and Prd. for that am using plant and location to differenciate. InExample: D:\SX\Common\ <plant><location> TinAdvance Swarna.