How do I maintain Proportions on Q.T. Export

How do I maintain Proportions on Q.T. Export.
Only occaisionally will my Flash files properly export to a QUicktime movie file.
Ordinarily the proportions are not retained.
I've tried several options in the QUicktime settings to little avail. How do I assure that the Exported images retain the correct proportions>
Thank you

When you first open the Quicktime Export Settings window you will see a listing for the Render width and height. These will, most likely, be the width and height of the Flash movie's stage. When you click on the QuickTime Settings... button in the lower left of that window, you will get a new, Movie Settings window. In the Video section, you will see a listing for Dimensions:. The dimensions listed will, again, most likely, be the same as the previous window's listing, and the same as the Flash movie's stage. If you click on the Size... button in this second window, you will get a third window. In this third window you can set a new width and height value for the Quicktime movie to be exported.
Are you trying to change the width and height of the exported Quicktime movie from the dimensions that you used in the Flash movie? If so, this is usually a very, very, bad idea. Stretching or shrinking one or both of the width and height dimensions of the Flash movie as it is being transcoded to a Quicktime file format, whether you are also compressing the movie or not, can cause some rude and unexpected output.
My process is to set the Flash movie to the dimensions and the frame rate that I want for the final Quicktime movie. I then export the Flash movie to an uncompressed Quicktime file in Flash. I take that uncompressed Quicktime file and open it in Final Cut Pro. I then output the final compressed Quicktime movie.

Similar Messages

How do I maintain quality when "importing an export"

Sounds like a weird question, but hear me out. I need to know if there is a specific way to maintain the quality level of a movie that I need to export, import into a new project and "re-export".
Reason being that apparently iMovie '09 is broken and produces all sorts of random audio mistakes when I export. So I need to export my project as a whole clip, import it to a new project, take out all the audio and put in the audio from scratch (having it completely detached from the clip).
I'll be exporting in 720 with the best possible quality because this is getting blown up onto projector screens.

Ive seen this before. I have no idea why its happening.
OK. Here is what I want you to do:
go to imovie: export quicktime...go to options....go to settings....go to compression type: Choose apple intermediate codec. Chose other in the compressor box. chose the right frame rate...if you are in the americas choose 29.97.
Go into the size...pick the right aspect ratio for your clips...you haven't said. Don't click anything else in that box.
Under sound settings: AAC, stereo, 48, quality best, target bit rate...i dunno know...i use 320, but 128 probably works also.
Save and it will export movie.....Watch the movie to see how it plays. If the it comes out OK. I POST BACK WITH NEXT STEPS-- because you don't have QT pro...if its ok....please tell me how big it is...

How do I maintain the quality of photos exporting in Book Module ?

I am concerned about exporting my book pages as jpg or pdf because of the compression each format applies. Any experience here? Thanks Sandy

You should just try it with some different settings for jpeg quality and open up the jpegs or pdfs to see whether they are acceptable quality. If you cannot see problems on your screen, they are not there. Both formats use jpeg compression but the quality setting should be good enough to not give any visible issues. At least that has been my experience. You should have your quality setting for jpeg above 75 or so but higher is typically not necessary. 300ppi is usually enough for printing from the files. sRGB is usually the correct color space to use except when you know your printing service knows what it is doing with regards to color management.

How to maintain Proportional Factors in SNP (not in DP)

Hi Gurus!
I want to maintain proportional Factors in SNP but could not know how to do. I read saphelp and know that we have to set up as following Steps:
-In Planning Area:
         1.Set the Keyfigure calculation type For Key Figure KF1 to P or I
         2.Set disaggregation key figure for KF1 to u201CAPODPDANTu201D
-When creating Planning Book/Dataview:
        3.Check u201CManual Proportion Maintenaceu201D
         4.Create a new Dataview that contain only KF APODPDANT
But I find that we can do step 3 only when we create Planning book with Planning Area that based on Planning Object Structure of Demand Planning Only (like 9ADPBAS).
With the Planning Area that based on Planning Object structure of SNP (like 9ASNPBAS), when creating planning book I could not check u201CManual Proportion Maintenanceu201D although I did the set up steps 1 and 2.
The question are:
                 1.     Can we maintain Proportional Factors in SNP? If yes, How to do?
                 2.     Can we create a new KF and consider it as Proportional Factor (as KF APODPDANT)? Is there any propblem?
Thanks very much for your help.

Hi Mr. M Manimaran
This is my reason:
We have:
- one DC
- and some locations those receive money from that DC.
The storage capacity of each Location is different from others and has different limit. Each location also need a number of money that is differrent from other.
There is one thing to take notice here: Money is a special good. Letu2019s say location L1 needs 1 million usd, DC can give them in some ways. For example:
-     First choice: 100usd: 90 %; 10usd: 10% ( so percentage of each denomination here is proportional factor)
-     Second choice: 100usd: 10%; 10usd: 90%
So quantity of notes of money of first choice is less than the second one although the total value of two choices are the same. So the Location L1 can store money with first choice. With the second choice, it could not store.
Here, we want to calculate and store Proportional Factor in SNP so that we can run SNP Optimizer or Heuristic inorder to enable the DC to supply money to satisfy the requirement of Location regarding locationu2019s storage capacity.
Please so me the way!
Thanks very much!
Edited by: xuanduyen on Aug 12, 2011 9:41 AM

How do I maintain responsive scaling on an edge animate animation when I insert it into dreamweaver?

How do I maintain responsive scaling on an edge animate animation when I insert it into dreamweaver? Please and thank you!

example.com is a generic http:// address to illustrate the difference between what you gave, file:/// and an actual URL address. There are no tutorials on that site. Sorry for the confusion.
#1 Have you procured your domain name and web hosting yet? You'll need to do that to publish your pages online.
#2 When you sign-up for web hosting, the company will send you FTP log-in credentials to your site's web server. You will enter this info into your DW Site Definition. Site > New Site > See screenshots below:
Under Servers: Root Directory is whatever your hosting company tells you to use. This varies by web host. Some commonly used ones are public_html, www or htdocs.
After your site definition is set-up, hit the TEST button to confirm it's working. If it's not connecting, go to More Options.
Go to the Files Panel (F8). Use the UP Arrow to PUT files to remote server.
Use the DOWN Arrow to GET files from server to your local site folder.
Post back when you have finished uploading your work to the remote server.
Nancy O

How do I maintain my Time Capsule hard drive?

How do I maintain the hard drive in my Time Capsule, say I wanted to maintain it with Disk Utility, Drive Genius, or Disk Warrior?
How should I connect to the TC from a MBP? I understand wireless or ethernet is not the way to do this.

apple says to never run disk utility on a time capsule disk and says when you reboot the time capsule it will check the file system. i tried to run disk utility on a sprase bundle and it trashed it and made it unusable. from other things i've read, it made it sound like if you need to run disk utility, or disk warrior, your supposed to remove the drive from the time capsule and connect it directly to the computer.

How can I maintain more than one contact person for a supplier

Hi
As per our business requirement , How can I maintain more than one contact person for a single supplier in SRM?
How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier.
we are in SRM 7, and currently we are creating contact person throug customised BDC.
please advice.
Thanks & Regards
NITIN
Edited by: nitinkk on Sep 9, 2011 10:22 AM

Dear Yaniv,
Thanks for your information,
I am able to create users But my problem is How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier ? Is there any kind of maping is available for the user/ contact person to the supplier no.??
Thanks & Regard
NITIN

HT1660 How can I maintain two separate itunes accounts on one single device without erasing either set of data?

How can I maintain two separate itunes accounts on one single device (iPhone 4) without erasing either set of data when syncing with itunes?

Hi,
Depends on what you trying to setup but for purchases, you can roll down at the very end of the iTunes/AppStore pages to logout of your current account and then login into a different one. Then your purchase will be billded to this new account. Everything will sync as you used to but in order to use the purchased content in iTunes or other devices, you will need to authorize them (you can have up to 5 devices authorized for an account).

How Do You Maintain OS X in a Pro Situation Environment?

This has come up - I want to see what others do to'maintain' their systems
I run this: http://www.maintain.se/cocktail once a week (pilot run the standard crons and cache cleaning... etc..)
Then once a month I run Disk Warrior and Tech Tool
I've been doing this for 'literally' years... well rephrase
after earlier faillings, went to tech tool after some of their early blunders (bugs) switched to disk warrior then added cocktail
SO...
In a professional audio situation of intensive hard drive use (I have over a terbyte in storage on four drives)
Looking for the definite answer:
How Do You Maintain OS X?

Yea. I'm not sure there's any one good way to maintain a Mac. I've been supporting Macs for a few years now, and have discovered nothing works better than a solid knowledge of OS X and your applications. Around here, most problems are app-specific. Problems with PDF or Postscript settings, corrupt preference files, stupid users, corrupt Entourage dbases, silly users, network issues, etc.
For the most part, our OS X systems are very solid, rarely having system-level issues. It's our old OS 9.2 systems with Quark that tend to break down daily.
Diskwarrior is a great tool. So it Cocktail and Onyx. Probably the best thing you can do to make sure a system keeps running is to keep the number of variables low. Install the apps you need, then don't mess with it. Don't install tons of third party software or extensions that screw with the internals of OS X. Don't upgrade software mid-project, and make sure you have a reliable backup system. If you're worried about hardware, you can run Hardware Tests, or just check the SMART status of your drives periodically.
Basically, good systems support is born from experience and paranoia. And remember, if it ain't broke, don't fix it.

How can I maintain multiple white spaces in a PDF written from InDesign?

I need to have 2 white spaces maintained (within a part #) in the PDF I write, but when I open in Acrobat it converts it to one space.
I've tried word spaces, set spaces and applying "no color" to a placeholder character and nothing is working!
Any ideas or suggestions?

I am talking about normal white space. Multiple fixed widt spaces are not a problem. How the space is handled in a PDF depends on how it is created.
Viele Grüße
Wilhelm Georg Adelberger
Von meinem iPhone gesendet
Am 21.08.2014 um 12:01 schrieb Peter Spier <[email protected]>:
How can I maintain multiple white spaces in a PDF written from InDesign?
created by Peter Spier in InDesign - View the full discussion
It may not be a great idea to use multiple spaces, but it certainly is not prohibited and sometimes is necessary -- you might want a 2em space, or a thin space before and after a tab you underline in a form.
I'm able to select the multiple spaces just fine in Acrobat 9 using the text touch-up tool.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6661037#6661037
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in InDesign by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How can we maintain multiple payment terms for a customer

how can we maintain multiple payment terms for a customer?

Hi,
You can leave the Payment terms field in the sales area data tab blank. and you can enter the payment terms at line item level while creating the sales order. By that you will achieve multiple payment terms for the same customer in the same sales order. but the invoice will be split by standard SAP based on the payment terms.
Also difference between the "Payment Terms" field in Company code tab and the sales Area tab is.
Company code tab payment terms are used only for the documents that are posted directly in FI module. for example credit and debit memos posted directly in FI and as a leading practice this should always be "payable Immidiately"
Sales area Tab payment terms are the one which are copied on to the sales order header data which are valid for all the line items unless you specifically mention different payment terms at line item level.
Regards,
Shantanu

How do I maintain my hyperlinks when converting a Microsoft Word Document to a PDF file?

How do I maintain my hyperlinks when converting a Microsoft Word document to a PDF file?

Hi Marbarrose,
When you make word file including hyperlinks then convert in pdf.
It will automatically maintain hyperlinks.
Regards,
Florence

How to add standard text in PO and how it is maintained ?

How to add standard text (paragraph) in PO and how it is maintained ?

Hi
Please go through this document.which has a step by step
Working with Frequently Used Texts
Use
You can copy texts from various sources to create PO texts:
Standard texts
Certain standard texts are supplied with the system and can be assigned to a purchasing document in Customizing.
The content of some standard texts is predefined by your system administrator.
You can also create standard texts yourself and copy them into purchasing documents.
Master records
Database fields
Activities
Creating Standard Texts
You can create your own standard texts via Tools ® SAPscript ® Standard text.
Inserting Standard Texts
You can insert your standard text on the long text screen via Insert ® Text ® Standard.
For more information, refer to the Basis documentation under BC Word Processing with the SAPscript Editor: Including Texts.
You can display the print preview via Text ® Print ® Print preview.
Inserting Texts from the Master Record
There are three ways of linking texts from a master record with a purchasing document. The relevant settings are made for each text type in Customizing for Purchasing. The indicator in the status column shows the nature of the linkage.
Option                                              Indicator in status column
The text is copied:
It is then independent of the text                 None
in the master record. Changes to
the text in the material master record
have no influence on the text in the document.
The text is displayed only:
It cannot be adopted.                                          N
The text is offered for copying:
It can be copied via Header or Item ® Texts ® Adopt text. (In requisitions: Goto ® Texts ® Adopt text.) Changes made in the master record will also be adopted in the document until such time as you copy the text.
Inserting Texts from Database Fields
You can include the content of a database field at any point in the text on the long text screen. A value specific to the relevant document is displayed in the printed document.
Choose Insert ® Symbols ® Program symbols.
Choose DDIC fields.
Search for the relevant table/structure (in the case of PO items, this is EKPO) and then choose ENTER .
Choose the relevant table field.
Choose Text ® Print preview to see the print preview.
Reward if useful
Aasif

How can we maintain tetxs in webdynpro insted of hardcode

Hi Experts,
i am new for this webdynpro abap.how can we maintain tetxs in webdynpro insted of hardcode like text symbols in abap.we are using freaquently texts in message manager.in best practice we should not maintain hard code.
guys suggests me.

Hi.,
For Labels You can Use OTR ( Online Text Repository ) Goto View ., In Menu bar Goto Online Text Repository and Add text ., then For Label Text press F4 then u can assign the Created Text.,
For Messages; Instead of HardCoding., Create a Class and Use that Class in Your WDA As Assistance Class ., In the Class Go to Texts and Add the text elements same as Text elements in se38. , You can use those text elements by providing message id in WDA ., using
WD_ASSIST->IF_WD_COMPONENT_ASSISTANCE~GET_TEXT( '001' ). " here 001 is the text element id which u created in class
hope this helps u.,
Thanks & Regards,
Kiran

How do I maintain a single iTunes library for two separate iMac user accounts?

How do I maintain a single iTunes library for two separate iMac user accounts?...without having to manually do something every download?

Pardon me, I am brand new at using an iMac. I understand the concept but I don't know exactly how to "move" the library. I found a shared folder under users on the hard drive. If I move it, won't I have to redirect each iTunes user to the new shared location?
If I point iTunes to anything other than the music folder under that user name, it shows as a "shared library". Preferences still shows it as that users library, regardless of where the advanced gear button says it is pointing to.
Am I asking for too much to have each user control the exact same music files, apps and playlists? I just want the two different itunes sessions to mirror each other without any frequent updating or copying.
We use the same id for itunes music and apps so we could just sync all devices under one iMac user id and not use it under hers.

How do I maintain Proportions on Q.T. Export

Similar Messages

Maybe you are looking for