How do I make a HD DVD that plays on PC?

Is this possible?
I have an .mov that is h.264 1280x720.
Is it possible to make a DVD of this in DVDSP that plays on PC's?
I was able to make one with HD DVD Standard, but that only plays on mac.
I'm sure there is something that I am missing or unaware of.

No, you do not want H.264 file at all. And if you do use a H.264 it will re-encoded as a MPEG-2 file, which means it will be double compressed, which always results in a loss in quality. Also be aware that you are working in SD resolution, which means 740x480 for NTSC video, not 1280x720.

Similar Messages

How do I make a music link that plays on the open page?

I want to display a image of a violin and have a on-off and slider bar underneath that shows playing progress for a short violin tune.
As it is, I have a link to the mp3 file which, when clicked, opens another page and shows the slider bar and start/volume control. I would like it to stay on the same page that the user is viewing when he/she clicks on the violin.
Can you help me with possible link on how this should be done? Or, give me a run-down on the steps to do this correctly in Dreamweaver? Can this be done simply in Dreamweaver or does it need to be done in another application like Flash?
TIA,
Ken

To bring all the different elements together the way you want, my choice would be to do this in Flash. Check the Adobe Flash Forum if you get stuck.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

S10e: How can I make my external DVD being detected to boot Recovery System

I bought an IDE-USB Adapter and connected a DVD to the Netbook. But the device is not found even by the BIOS, too.
So I can not install the System. In addition there will be no BIOS update available for LINUX to detect DVD drives if this is the problem.
How can I make my Recovery DVD run on my Lenovo Ideapad S10e?
Solved!
Go to Solution.

You use a normal 5 1/4 " DVD/CD drive,.it needs 12V dc did you powered the drive... ?
So the adapter is not recognized, thats bad ....the usb-ide adapter is defective....
The second question is...
Linux cant use any .exe files ...its not windows... thats normal...
so what will you install on it ?
Biosupdate ? is the only one .. i think.. but that is a problem for lenovo... i didnt see an biosupdater under linux
Why you buy those expensive ide-usb adapter ?
you can get a slimline cd usb drive is available for 25 $ (or 25€) on online shopper...
and you dont need a power adapter ...
Greets KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

How can I make an ant file that launches an AS project app in a debug flash player that traces to the flex console?

How can I make an ant file that launches an AS project app in a debug flash player that traces to the flex console?
Basically I like the control over the compiling process that I get by using Ant - but I really want traces to come up immediately without having to switch contexts.
I have an ant file that successfully launches a swf in the flashplayer - but I don't know how to make the flex console start displaying the trace output. I assume that I will have to point it to the appropriate trace output file - but I am not sure how to have ant even address the console. Is this possible?
Here is the the target node from my ANT file:
    <target name="launch">
        <exec executable="${FLASHPLAYER_EXE}" errorproperty="trace.output">
            <arg line="'${DEPLOY_DIR}\test.swf'" />
        </exec>
    </target>
Thanks for any thoughts, or alternatives!

For the record, I ended up using Logwatcher - it worked perfectly.
http://graysky.sourceforge.net/

How can I make a calender entry that makes a sound when it is its turn?

How can I make a calender entry that makes a sound when it is its turn?

Have you even looked at the calendar app? Did you not notice the "Alert" field in the event details when you create a calendar event?

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

Well if there is a EFI block, then running a program in OS X isn't going to do a lick of good.
After all EFI was designed for Trusted Computing and Digital Rights Management, to act between the OS and hardware, can read drives, contact the Internet and everything.
Windows doesn't use EFI, will have UEFI in Windows 8 though.

Is it possible to tell me how i can make program in labview that take pixels of black and withe image and give coordinate of black or white pixels back to me.

hello everybody
is it possible to tell me how i can make program in labview that take pixels of black and withe image and give coordinate of black or white pixels back to me.
Solved!
Go to Solution.

Here's a slightly simpler version.
(Depending how you want to process the output, you might not need to traspose and/or reverse. Boolean to 0,1 works directly on the 2D array if needed )
amkamyab wrote:
it is good. i could enter 1bit image in and show it in array. now i want to take pixels coordinates. i meen i want to have (x,y) of each pixel to send it pixel coordinate to another program i wrote for steppers motor.
Can you be a bit more specific on how the output is supposed to look like? Initially you wrote "black or white", and since all pixels are either black or white, do you want to send all pixels? In what format? In what order? Please clarify?
LabVIEW Champion . Do more with less code and in less time .
Attachments:
BW-Pix.png ‏8 KB

I have three dvds that play in a dvd player. One of the three plays in my imac but the other two say they are blank. How do I get my imac to read these other two dvds?

I have three dvds that play in a dvd player. One of the three plays in my imac but the other two say they are blank. How do I get my imac to read these other two dvds?

My iMac is very picky about any dirt or smudges on the DVD.

How can I sync my ipod to the i tunes library in my computer? and how can I make sure each Cd I play automatically is saved onto the Ipod?

How can I sync my ipod to the i tunes library in my computer? and how can I make sure each Cd I play is automatically saved onto the Ipod?
My problem is that if I open I tunes, the Sync ipod option in the menue is grayed out, and so not available.
This is starting to irritate me, so any help would be much appreciated.
Thanks!

I have the same problem. The Sync ipod option in the menue is grayed out, and so not available. HELP!

My ipod nano 6 will only play one or two songs then I have to force the next song to play. It will start several songs before settling on one. This just started and I havent changed anything. How to I make it go back to playing songs continuously?

My ipod nano 6 will only play one or two songs then I have to force the next song to play. It will then start several songs before settling on one. This just started and I havent changed anything. How to I make it go back to playing songs continuously?

Then back it up and do a restore. If that does not work and if you are still under warranty, call Apple tech support or take the iPod to your local Apple Store or an AASP.
iPod Tutorials
iPod Manuals
iTunes & iPod Hints & Tips

Hi I just updated from Snow Leopard to Mountain Lion. I write DVD's using Final Cut Pro, creating a DVD that plays HD and Standard Definition on one disk. My problem is when I used load the disk on my G5 it would ask if you want High Definition or Standar

Hi I just updated from Snow Leopard to Mountain Lion.
I write DVD's using Final Cut Pro, creating a DVD that plays HD and Standard Definition on one disk.
My problem is when I used load the disk on my G5 it would ask if you want High Definition or Standard Definition, now it just defaults to Standard Definition.(I'm using Apple's DVD Player)
Can I fix this problem?

Addendum: I read on a post here (http://forums.macrumors.com/showthread.php?t=420169) about removing some kext files in order to trick OSX into thinking that there were no FireWire ports.
I followed the instructions and removed from /System/Library/Extensions/ the following files:
IOFireWireSerialBusProtocolTransport.kext
IOFireWireAVC.kext
IOFireWireFamily.kext
IOFireWireIP.kext
IOFireWireSBP2.kext
I restarted and BAM...Snow Leopard booted crazy fast and the mouse and keyboard worked instantly.
The System Profiler says "No FireWire ports were found."
So this tells me that the FW port is probably the culprit and is messing up the installation.
So how do I hack the Mountain Lion installer and tell it to ignore the FW port, which is obviously quite dead? Or is there something I can do to the Base system that is similar?

Can't burn dvd that plays on dvd player. seems to be in file format. do i need extra software? using iMovie and final cut pro trail..both same result. have macbook pro 2012

can't burn dvd that plays on dvd player. seems to be in file format. do i need extra software? using iMovie and final cut pro trail..both same result. have macbook pro 2012

NStrange wrote:
... confused about which video format(s) to use (e.g.: SWF, MPEG4, etc.), and whether or not I should use 3rd party compression software (e.g.: Sorenson Squeeze, Compression Master, etc.) along with / in addition to Final Cut Express (among other similar issues)...
FC/e is based upon the Quicktime-engine; so, on 'Export using QT', you'll get all codecs & settings.
but which one..
due to sheer popularity, YouTube became a 'standard' - I'm happy with the convenience, YT and the 'embed'-code offers - excellent quality, automatic adjusted to the watchers connection&hardware.
my export settings are 720p, h264, 6MBit/sec - gives a - imho! - superb quality.
(example of a 'screen-test' from my latest project CLICK )
for creating so-called 'flash video'/.flv, you need 3rd party apps.
Sorenson Squeeze is more of an pro-tool, .. you need some background knowledge to get noticeable 'better' quality.
.. and the question is: are you willing to pay $.$$$ for that 0.x% more quality .. ? does your source offers such a 101% quality, which needs such affords?
if bandwidth is an issue, because you're hosting on your own servers, consider the free codec xh264, you can install as a free QT-plug-in.. with low or super-low bitrates, it offers a superior quality compared to h264 ...

Exporting problem: How can I make a PAL DVD with NTSC footage?

Hi everyone,
I need some help as I've been trying to burn a DVD for a couple of days now but it still isn't working. Here is my situation:
I shot a lot of standard definition DV with my Canon GL-2 (NTSC, bought in America) that I imported into the trial version of Premiere 5.5.
I edited the footage and set out to make a DVD with the footage that will play on PAL televisions as I live in Australia now and it's all PAL over here.
I exported the footage and put it onto Windows DVD Maker because the trial version of Premiere doesn't let you use Encore.
The footage looked great on Premiere and on the little preview that you get through Windows DVD Maker, but when I burnt the DVD and tried playing it on my TV it looked really bad.
The big problem was the color. Everything was much too red, particularly people's faces.
I assume the problem lies in my export settings, and I was hoping someome who has done this before could help me out. I tried a variety of settings, but they all looked bad and I'd prefer not to waste any more money on DVDs that look like hell.
Is there anyone out there who can tell me how I can get the DVD to look like it does on my computer? What setting would I need to apply? I have been all over the internet, looking at a lot of tutorials and forums, but havent found an answer yet.
Thanks a bunch!
Shawn
PS- My academic credentials have now been verified by Adobe, so if you know a way to do this using Encore, please let me know because in a few hours I will have access to that as well. Cheers!

Hey shooternz, thanks for the fast reply.
My DVD player is playing the DVDs so that's OK, the real problem is that they look so bad. I just bought a whole mess of DVDs because I thought I would just experiment while I was waiting to see if anyone could help me out, and the results have been frustrating. I tried it with all PAL settings and the first DVD I made was much better. That one didnt have all of the sections, just one of the chapters (I wanted to check quickly whether the setting I had was a good one, so I just put a short 7 minute clip on). Encouraged, I tried burning the whole disc using the same settings, but it came out crappy again. Much too red. This is really frustrating me. My computer is new, so I can't see why there would be any problem with the DVD burner, but if two DVDs with the same export settings are coming out differently, I'm thinking it might have to be a problem with either the DVD burner or the DVDs?
Can anybody suggest anything? I'm dying here.

How to I make a "Package" folder that contains my app?

I am not a developer, but I'm hoping someone here will know how to do what I'm asking.
I am creating a VERY simple Filemaker runtime app. It consists of an .app file (which is a package), some extensions, a .usr file, and an aknowledgements PDF.
I'd like to place all of these files in a folder and then have that folder be the new package, so that when the user double-clicks it, it launches the app.
How to I make a folder launch an app when it is double-clicked?
Thanks

I think I misunderstood, or I didn't ask the correct question.
I was not looking for a way to build an installer (although that was helpful!), I was actually looking for a way to make the enclosing folder for my app double-clickable to launch the app.
My app consists of a bunch of files that are all in a folder. That is messy - I'd like for just one icon for my app to live in the /Applications folder. Can I set up the app's enclosing folder so that when the user double-clicks it, it opens the app? (Is this done with folder actions?) This would essentially make the solitary apps folder indistinguishable from the actual app to the user, and it woulc look a lot cleaner than having a bunch of files.
Most apps can be right-clicked to "show package contents". Isn't that essentially just an enclosing folder with a folder script that contains the app and its files?
I hope I'm making sense here.

How do you make a new action that adds a signature?

I want to make a new action that performs OCR, and then adds a drag and droppable signature to the top of the document. I figured out how to do the OCR, but I dont see an option for adding a signiture. How can this be done?'
I have acrobat pro x

There are 2 very important points:
1. Its bundled up with other stuff, so less work and easier to use than pressing each action individually
2. Much easier for the intended users: someone unskilled in acrobat who just wants to press 1-2 buttons and be done with it.

How do I make a HD DVD that plays on PC?

Similar Messages

Maybe you are looking for